All, I am trying to load a vfio driver for the Intel VFs. I am seeing the following error from kernel. I tried all the grub options with iommu=on,iommu=pt, intel_iommu=on, intel_iommu=pt,isolcpus=2,4 etc.
Can someone suggest what can be issue here and how I can mitigate this. [Wed May 4 12:13:47 2016] dmar: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f3521a000 [Wed May 4 12:13:47 2016] DMAR:[fault reason 05] PTE Write access is not set [Wed May 4 12:13:49 2016] dear: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f35219000 [Wed May 4 12:13:49 2016] DMAR:[fault reason 05] PTE Write access is not set [Wed May 4 12:13:49 2016] dmar: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f35218000 [Wed May 4 12:13:49 2016] DMAR:[fault reason 05] PTE Write access is not set [Wed May 4 12:13:51 2016] dmar: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f35217000 [Wed May 4 12:13:51 2016] DMAR:[fault reason 05] PTE Write access is not set [Wed May 4 12:13:53 2016] dmar: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f35216000 [Wed May 4 12:13:53 2016] DMAR:[fault reason 05] PTE Write access is not set [Wed May 4 12:13:55 2016] dmar: DMAR:[DMA Write] Request device [86:00.1] fault addr 1f35215000 [Wed May 4 12:13:55 2016] DMAR:[fault reason 05] PTE Write access is not set 86:00.1 Ethernet controller: Intel Corporation Ethernet 10G 2P X520 Adapter (rev 01) Subsystem: Intel Corporation 10GbE 2P X520 Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 69 Region 0: Memory at c8b00000 (64-bit, non-prefetchable) [size=1M] Region 2: I/O ports at 8000 [size=32] Region 4: Memory at c8d00000 (64-bit, non-prefetchable) [size=16K] Expansion ROM at <ignored> [disabled] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] MSI-X: Enable+ Count=64 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00002000 Capabilities: [a0] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 <8us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [e0] Vital Product Data Product Name: X520 10GbE Controller Read-only fields: [PN] Part number: XYT17 [MN] Manufacture ID: 31 30 32 38 [V0] Vendor specific: FFV16.5.20 [V1] Vendor specific: DSV1028VPDR.VER1.0 [V3] Vendor specific: DTINIC [V4] Vendor specific: DCM10010081D521010081D5 [V5] Vendor specific: NPY2 [V6] Vendor specific: PMT12345678 [V7] Vendor specific: NMVIntel Corp [RV] Reserved: checksum good, 0 byte(s) reserved End Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn+ ChkCap+ ChkEn+ Capabilities: [140 v1] Device Serial Number 00-00-00-ff-ff-00-00-00 Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV) IOVCap: Migration-, Interrupt Message Number: 000 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy- IOVSta: Migration- Initial VFs: 64, Total VFs: 64, Number of VFs: 32, Function Dependency Link: 01 VF offset: 128, stride: 2, Device ID: 10ed Supported Page Size: 00000553, System Page Size: 00000001 Region 0: Memory at 00000000c8700000 (64-bit, prefetchable) Region 3: Memory at 00000000c8800000 (64-bit, prefetchable) VF Migration: offset: 00000000, BIR: 0 Kernel driver in use: vfio-pci Thanks, Munish Mehan
_______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
