The output of lstopo shows that 0-6, 1-7, etc... are paired, which is what I originally assumed (as a 4790k is 0-4, 1-5, with similar architecture so I'd assume similar), but different from the virsh capabilities output (which did not list siblings correctly for me) Pic: https://www.dropbox.com/s/m79l36e32f08b8d/out.png?dl=0 XML: https://www.dropbox.com/s/wr93edyszlpcosm/summary.xml?dl=0 So with all of that said, is it safe to say the pairings are 0-6, 1-7, 2-8, 3-9, 4-10, 5-11 for a 5930k? Just want to make sure. Thanks!
On Fri, Mar 4, 2016 at 1:09 PM, Jeff <bunge...@gmail.com> wrote: > Interesting, relevant results below: > > <topology> > <cells num='1'> > <cell id='0'> > <memory unit='KiB'>32839588</memory> > <cpus num='12'> > <cpu id='0' socket_id='0' core_id='0' siblings='0'/> > <cpu id='1' socket_id='0' core_id='0' siblings='1'/> > <cpu id='2' socket_id='0' core_id='1' siblings='2'/> > <cpu id='3' socket_id='0' core_id='1' siblings='3'/> > <cpu id='4' socket_id='0' core_id='2' siblings='4'/> > <cpu id='5' socket_id='0' core_id='2' siblings='5'/> > <cpu id='6' socket_id='0' core_id='3' siblings='6'/> > <cpu id='7' socket_id='0' core_id='3' siblings='7'/> > <cpu id='8' socket_id='0' core_id='4' siblings='8'/> > <cpu id='9' socket_id='0' core_id='4' siblings='9'/> > <cpu id='10' socket_id='0' core_id='5' siblings='10'/> > <cpu id='11' socket_id='0' core_id='5' siblings='11'/> > </cpus> > </cell> > </cells> > </topology> > > The siblings value is equal to the cpu id, however the core_id looks to be > on to something! > So if that is correct, the pairings would then be cpu id 0 &1 = core_id > 0, cpu id 2 &3 = core_id 1, etc... > Does the output for yours show the siblings value differently (as you > explained it would then be cpuid 0 = siblings 1, etc...)? > > On Fri, Mar 4, 2016 at 10:31 AM, Rokas Kupstys <rok...@zoho.com> wrote: > >> Run "virsh capabilities" and look for <cpus> tag. It lists core siblings. >> Its what you are looking for right? For me this script also is little >> inconclusive, however seems like libvirt lists siblings right as i cant pin >> one core to two physical cores that are not siblings. >> >> >> On 2016.03.04 16:34, Jeff wrote: >> >> I'm trying to distinguish which cores are which on my Intel 5930k >> processor. >> I ran the script at the console, with no other additional VM's, Docker, >> or plugins running (I'm running UnRAID). >> My output doesn't show any real differences between the cores, all 4's >> and 5's, with the expected 10 to itself. >> I had to modify the script a little to run (locations for netperf and >> BC), but that's really it. >> Nothing else special to report, no messing with governors, or the like. >> The output of the script (pic) is located here >> <https://www.dropbox.com/s/nfyacpvqwy74mi2/IMG_20160302_195344%20%281%29.jpg?dl=0> >> https://www.dropbox.com/s/nfyacpvqwy74mi2/IMG_20160302_195344%20%281%29.jpg?dl=0 >> >> Thanks! >> >> >> _______________________________________________ >> vfio-users mailing >> listvfio-users@redhat.comhttps://www.redhat.com/mailman/listinfo/vfio-users >> >> >> >> _______________________________________________ >> vfio-users mailing list >> vfio-users@redhat.com >> https://www.redhat.com/mailman/listinfo/vfio-users >> >> >
_______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
