Hey guys, Just had another go using the i440FX chipset and unfortunately get Code 43 again. Here is the XML I used on this occasion: http://pastebin.com/kgV4HcG4 .
In an attempt to prevent the driver seeing it was in a VM I installed it from scratch using the passed through GPU and passed through a keyboard and mouse. Other than the virtio networking and disk I am not sure what the nVidia driver may be seeing to cause it to decide to throw Code 43. Anyone have any ideas? Thanks, Alan Jenkins On Fri, 11 Dec 2015 at 08:28 Alan Jenkins <alan.james.jenk...@gmail.com> wrote: > Hi Okky, > > Thanks for the very prompt reply. I was unaware that x-vga was not > required with OVMF so it has been in my XML on all attempts so far. I just > tried removing it from the XML and rebooting the VM but unfortunately the > Code 43 still is present. I will now try to reinstall the drivers and > reboot again to see if it is then resolved. If not I will then try i440FX > without the x-vga=on as while I have also tried i440FX it was in the > presence of the x-vga=on. > > I will get back to you soon with the results of my testing. > > Thanks, > > Alan Jenkins > > On Fri, 11 Dec 2015 at 08:21 Okky Hendriansyah <o...@nostratech.com> > wrote: > >> On December 11, 2015 at 15:09:41, Alan Jenkins ( >> alan.james.jenk...@gmail.com) wrote: >> >> Hey guys, >> ... >> >> My libvirt version is: 1.3.0-1. >> My Tianocore uefi is from this RPM: >> edk2.git-ovmf-x64-0-20151209.b1361.gfaec499.noarch.rpm >> >> ... >> >> Hi Alan, >> >> I noticed you have x-vga=on in your device but you’re using OVMF >> approach. As far as I know, x-vga=on is for VGA passthrough using Seabios >> approach. Have you tried using without it? In addition, have you also tried >> switching from Q35 to i440FX? >> >> Best regards, >> >> -- >> *Okky Hendriansyah* >> >
_______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
