I think the actual issue here is that there is signal leak that causes
frontend 0/1 to temporarily obtain a lock onto the DVB-S signal because I
can get a picture on on adapter0/frontend1 despite no cable being connected
to it. So it's more useful to be able to explicitly tell VDR to ignore
certain combinations of adapter and frontend.
Nick
On Sun, 9 Jun 2019 at 14:34, Nick Burrett <n...@sqrt.co.uk> wrote:
> I have a TBS 6522 tuner card, which has 4 ports, presented as two DVB
> devices. The DVB-C/DVB-T ports share the same muxer as the DVB-S/S2. VDR
> correctly detects this:
>
> Jun 09 13:29:13 tv.house vdr[16535]: [16535] DVB API version is 0x050B
> (VDR was built with 0x050B)
> Jun 09 13:29:13 tv.house vdr[16535]: [16535] frontend 0/0 provides
> DVB-T,DVB-T2,DVB-C,ISDBT,DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256
> ("TurboSight TBS 6522 DVB-S/S2/DVB-T/T2/C ")
> Jun 09 13:29:13 tv.house vdr[16535]: [16535] frontend 0/1 provides
> DVB-S,DVB-S2,DSS with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Silicon Labs
> Si2183")
> Jun 09 13:29:13 tv.house vdr[16535]: [16535] frontend 1/0 provides
> DVB-T,DVB-T2,DVB-C,ISDBT,DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256
> ("TurboSight TBS 6522 DVB-S/S2/DVB-T/T2/C ")
> Jun 09 13:29:14 tv.house vdr[16535]: [16535] frontend 1/1 provides
> DVB-S,DVB-S2,DSS with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Silicon Labs
> Si2183")
> Jun 09 13:29:14 tv.house vdr[16535]: [16535] found 2 DVB devices
>
>
> Currently I have DVB-T connected to /dev/dvb/adapter0/frontend0 and a
> DVB-S connected to /dev/dvb/adapter1/frontend1.
>
> The streams from DVB-T work fine but the DVB-S streams do not work at
> all. The problem appears to be that VDR never attempts to test frontend
> 1/1 for a signal and instead continually retries frontend 0/1:
>
> Jun 09 14:14:30 tv.house vdr[16891]: [16897] frontend 0/1 timed out while
> tuning to channel 26 (BBC Two HD), tp 210847
> Jun 09 14:15:33 tv.house vdr[16891]: [16897] frontend 0/1 timed out while
> tuning to channel 26 (BBC Two HD), tp 210847
> Jun 09 14:16:36 tv.house vdr[16891]: [16897] frontend 0/1 timed out while
> tuning to channel 26 (BBC Two HD), tp 210847
> Jun 09 14:17:40 tv.house vdr[16891]: [16897] frontend 0/1 timed out while
> tuning to channel 26 (BBC Two HD), tp 210847
> Jun 09 14:18:44 tv.house vdr[16891]: [16897] frontend 0/1 timed out while
> tuning to channel 26 (BBC Two HD), tp 210847
>
> It would be useful if it were possible to change the --device parameter to
> be more explicit about which DVB devices should be enabled e.g.
> --device=A,F;A,F i.e. --device=0,0;1,1 from my configuration so that VDR
> wouldn't unnecessarily keep trying to get a signal from frontend 0/1.
>
> Regards,
>
> Nick
>
_______________________________________________
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
