VDR developer version 2.1.6 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.6.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.5-2.1.6.diff
MD5 checksums:
79519dac59166fabc2029b916bd61d00 vdr-2.1.6.tar.bz2
99f2f7094a242462696c0da5e52bb4c3 vdr-2.1.5-2.1.6.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment, I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The changes since version 2.1.5:
- Revoked "Fixed some compiler warnings with Clang 3.4.1" from ci.c, because
this
did not compile with older versions of gcc (thanks to Sören Moch).
- Fixed keeping the current position in the Recordings menu if a recording was
deleted in a sub folder.
- Fixed handling transfer mode on full featured DVB cards for encrypted channels
that have no audio pid (reported by Christian Winkler).
- Fixed a possible endless loop in cH264Parser::GetGolombUe(), which caused
recordings
on some HD channels to get stuck and resulted in buffer overflows.
- Fixed handling PAT packets when detecting frames, so that they can be properly
taken into account when regenerating the index of a recording.
- Fixed adding new source types in case they are already registered (reported
by Rolf
Ahrenberg).
- Removed an unnecessary assignment from cMenuRecordings::~cMenuRecordings().
- The Recordings menu now remembers the last recording the cursor was
positioned on,
independent of the last replayed recording. When a replay ends, however, the
cursor
will initially be positioned to the last replayed recording again when the
menu
is opened.
- Updated the Finnish OSD texts (thanks to Antti Hartikainen).
- Fixed drawing the live indicator in the LCARS skin in case there are no
devices.
- When checking for obsolete channels, those with an RID that is not 0 are now
ignored (suggested by Oliver Endriss).
- The SDT is now only parsed *after* the NIT has been read, and it explicitly
uses
the source value derived from the NIT. This should prevent new channels from
being
created with the wrong source.
- Added a log message in case a receiver is detached from its device because the
assigned CAM can't decrypt the channel.
- Refactored setup parameter handling for output devices:
+ The function cDevice::GetVideoSystem() has been deprecated and will be
removed
in a future version. In order to check whether a particular plugin needs to
be
modified if this function is removed, you can comment out the line
#define DEPRECATED_VIDEOSYSTEM
in device.h.
+ Handling the "video (display) format" (things like 16:9, 4:3, pan&scan,
letterbox
etc) shall now be done by the individual output devices, because the types
and
numbers of parameters are too device specific. The Setup/DVB parameters
"Video format" and "Video display format" are still there for now and can
be used
by SD devices. HD devices, however, shall not use these parameters (any
more),
but rather implement their own setup menu with the necessary parameters for
controlling output.
+ The dvbhdffdevice plugin has been modified accordingly.
+ Made it clear that cDevice::SetDigitalAudioDevice() merely tells the output
device
that the current audio track is Dolby Digital. This function was only used
by the
original "full featured" DVB cards - do not use it for new developments!
If an output device has several ways of replaying audio (like HDMI or
analog jack)
it shall implement the proper options in its plugin's SetupMenu() function.
- Added support for "Pilot", "T2-System-Id" and "SISO/MISO" parameters (thanks
to
Rolf Ahrenberg).
- Now initializing the isOnVideoDirectoryFileSystem member of cRecording when
scanning the video directory, so that it won't cause a delay when opening the
menu
on a system with a large number of recordings.
- Now resetting the isOnVideoDirectoryFileSystem member of a cRecording to -1
after
renaming it, so that it will be re-checked upon the next call to
IsOnVideoDirectoryFileSystem().
- Added support for systemd (thanks to Christopher Reimer). To activate this you
need to add "SDNOTIFY=1" to the 'make' call.
Have fun!
Klaus
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
