Am 05.01.2014 12:42, schrieb Klaus Schmidinger: > VDR developer version 2.1.3 is now available at > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3.tar.bz2 > > A 'diff' against the previous version is available at > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2-2.1.3.diff > > MD5 checksums: > > 054f80e0045aa6fad118e9285b52f4f2 vdr-2.1.3.tar.bz2 > 3c5ab05d5c4d0b984b34e84190e80949 vdr-2.1.2-2.1.3.diff > > WARNING: > ======== > > This is a *developer* version. Even though *I* use it in my productive > environment, I strongly recommend that you only use it under controlled > conditions and for testing and debugging. > > > Originally I intended to release this version only after the new DiSEqC > configuration dialog was finished. But in the meantime quite a few other > things > have come up, so I decided to postpone that dialog and first release what has > piled up so far. > > > The changes since version 2.1.2: > > - Changed the return value of cPositioner::HorizonLongitude() to 0 in case the > latitude of the antenna location is beyond +/-81 degrees. > - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). > - Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf Ahrenberg). > - Changed the name of the SVDRP command RENR to MOVR (suggested by Rolf > Ahrenberg). > - When cutting a recording it is now checked whether there is already an > edited > version of this recording (with the same name, but starting with '%'), and > the > user is prompted for confirmation to overwrite it (suggested by Rolf > Ahrenberg). > - Revoked "Added maximum signal strength value for TechniSat SkyStar 2 DVB-S > rev 2.3P" > because it broke things for the "TechniSat AirStar 2" DVB-T card. > - The LIRC remote control now connects to the socket even if it doesn't yet > exist when > VDR is started (thanks to Lars Hanisch). > - Changed the absolute latitude limit for visible satellites to 81.2 degrees. > - Added code for parsing LCN and AVC descriptors to libsi (thanks to Rolf > Ahrenberg). > - In the "Select folder" menu pressing Ok now selects the folder, even if > this is a > folder that contains sub folders (marked with "..."). To open such a folder > you > can press the Red key. > - Fixed a possible access to uninitialized data in cEIT::cEIT() (reported by > Dominik > Strasser). > - The new menu category mcRecordingEdit is now used to mark menus that edit > recording > properties (suggested by Stefan Braun). > - Changes in the teletext PID no longer cause retuning (and thus interrupting > a > recording). > - Removed '_' from the FileNameChars and CharMap translations in uk_UA.po. > - Updated the Italian OSD texts (thanks to Diego Pierotto). > - Fixed a missing initialization in the c'tor of cSkinLCARSDisplayChannel > (thanks to > Marko Mäkelä). > - Simplified some conditional expressions in skinlcars.c and skinsttng.c > (suggested > by Marko Mäkelä). > - Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu > (reported by > Marko Mäkelä). > - Fixed a possible crash if the recordings list is updated externally while > the > Recordings menu is open (reported by Lars Hanisch). > - Added a missing closing ')' in the help and man page entry of the --vfat > option > (reported by Lars Hanisch). > - Fixed setting the name of the video directory to avoid a crash when using > --genindex, > and also to use the correct directory with --edit (the latter reported by > Marko > Mäkelä). > - The Recordings menu can now be called with a cRecordingFilter, which allows > the > caller to have it display only a certain subset of the recordings (thanks > to Lars > Hanisch). > - Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to Lars > Hanisch). > - Made it clear that the Data parameter in cDevice::StillPicture() may point > to a > series of packets, not just a single one (thanks to Thomas Reufer). > - cDevice::TrickSpeed() now has an additional parameter named Forward, which > indicates > the direction in which replay is being done (suggested by Thomas Reufer). > This > information may be necessary for some output devices in order to properly > implement > trick modes. Authors of plugins that implement output devices will need to > add this > parameter to their derived cDevice class, regardless of whether they will > make use > of it or not. > - Added a note to ePlayMode in device.h that VDR itself always uses > pmAudioVideo when > replaying a recording (suggested by Thomas Reufer). > - Fixed some spellings in positioner.h and Doxyfile (thanks to Ville Skyttä). > - Changed '%a' to the POSIX compliant '%m' in all scanf() calls (thanks to > Ville > Skyttä). > - The new function cCamSlot::Decrypt() can be used by derived classes to > implement a > CAM slot that can be freely assigned to any device, without being directly > inserted > into the full TS data stream in hardware. A derived class that implements > Decrypt() > will also need to set the new parameter ReceiveCaPids in the call to the > cCamSlot > base class constructor to true, in order to receive the CA pid TS packets > that > contain data necessary for decrypting. > - Many member functions of cCamSlot have been made virtual to allow for easier > implementation of derived classes. > - cTSBuffer now provides the number of available bytes in its Get() function. > - cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to allow > CAM slots > that can be freely assigned to any device access to the TS data stream. > - Added a check to avoid a possible NULL pointer dereference in > cCiSession::SendData() > (reported by Ville Skyttä). > - Deleted a superfluous assignment in cPipe::Open() (reported by Ville > Skyttä). > - The script given to VDR with the '-r' option is now also called after the > recording > process has actually started (thanks to Christian Kaiser). > - Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks to > Ville Skyttä). > Plugin authors may want to apply the following change to their Makefile: > -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) > $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr > || pkg-config --variable=$(1) ../../../vdr.pc)) > +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) > $(VDRDIR)/vdr.pc),$(shell > PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." pkg-config --variable=$(1) vdr)) > - Eliminated MAXDVBDEVICES (suggested by Oliver Endriss). > - Channels that are no longer contained in the current SDT of a transponder > are now > marked with the keyword OBSOLETE in their name and provider fields. That > way you can > identify obsolete channels when you switch to them, and you can get the > complete > overview of all obsolete channels by sorting the Channels list by provider > (by > pressing the 0 key twice). Automatic deletion of obsolete channels may > follow later. > > Have fun!
I will! :) Thanks for a bunch of little gems in this release like "obsolete channels". Have to dig into the new CAM stuff, maybe now it's possible to integrate the CI of Digital Devices... Lars. > > Klaus > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
