Why build it externally? I was quite certain that the ddbridge drivers are in mainline for a while now?

Which modules to you select?

On 11/26/12 18:20, Lars Hanisch wrote:
Hi,

Am 26.11.2012 10:13, schrieb Oliver Schinagl:
I'm thinking of getting into the whole satellite thing (DVB-T user for now) and 
was searching for interesting DVB-S2
tuners. I found that the l4m octopus/duoflex-s2 a very interesting device. 
While expensive you can connect up to 8
tuners! to a single PCI-e 1x lane (Bandwith should be more then enough). While 
I know there is a octopus mini-pcie
device, I heard that there where some PCB issues so decided on getting the 
PCI-e version.

I have tried googling for some up to date linux! information but found very 
little. Are there any l4m/dd octopus/duoflex
DVB-S2 (or even CAM/DVB-C/DVB-T) users here that can share their current (and 
past) experiences? The tuner (only 1
dualtuner board and the octopus) will set you back a good 200Euro so I want to 
be sure that the devices is properly
supported.

  I'm using a DuoFlex with a DVB-C/T dual tuner modul. How to build the latest 
drivers is described here (german only):
  
http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/113367-aktuelle-treiber-f%C3%BCr-octopus-ddbridge-cines2-ngene-ddbridge-duoflex-s2-duoflex-ct-cinect-sowie-tt-s2-6400-teil-2/

  If you'r using Ubuntu or yaVDR, there's the linux-media-dkms package with 
this driver included.
  My DVB-C/T card is working here for months with no problems. Second dual 
tuner is ordered... :)

Lars.

_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr



_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Reply via email to