> Hi Rob, > > I also don't think its a pvrinput problem because: > streamdev doesn't query for a new device if the current and the next > channel has the same transponder. This is checked via the following > define: > > channels.h:#define ISTRANSPONDER(f1, f2) (abs((f1) - (f2)) < 4) //XXX > > All the channels in channel.conf have the same frequency, so streamdev > only changes the receivers but doesn't query for a device. > I havent understand exactly what you are doing. Do you use an analogue > input (like scart) of the pvr500 card and the channel switch script > changes the channel of another device ? If so, i could imagine the > frequency in channels.conf doesn't matter and you could simply modify > the frequencies. > >
ok, that makes sense to me... I am using a brain dead cable box which are being given away by the cable company, these have RF out only on either US Channel 3 or 4. I have two of these wired together with a signal combiner (To minimize the side band intererence). For pvrinput they all need this frequency.. (now at Ch 4), if device 1 is busy I hacked pvrinput to flip the frequency to channel 3, but streamdev would never know this. Can we put a check in streamdev to check if it's a pvrinput device and recall even if the frequency is the same? _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
