On 25.04.2009 19:18, marti...@embl.de wrote: > As you probably know the rotor plugin is rather buggy by now as it has more > patches than code. > It would be not be necessary if vdr had an option ´Enable GotoPosition > ´ > and if enabled it sent the diseqc command E0 31 6B XX which means ´First > rotor > go to stored position XX´ when changing to a channel on a different sat > position. > > This way it would be posible to use an external program such as xdipo (GPL) > to > store the orbital positions in the first place and then just configure > diseqc.conf for vdr use. > > #my diseqc.conf > > #S19.2E is the first stored position > S19.2E 11700 V 9750 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t > S19.2E 99999 V 10600 t v W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T > S19.2E 11700 H 9750 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 t > S19.2E 99999 H 10600 t V W15 [E0 31 6B 01] W25 [E0 31 6B 01] W15 T > > #S13.0E is the second stored position > S13.0E 11700 V 9750 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t > S13.0E 99999 V 10600 t v W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T > S13.0E 11700 H 9750 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 t > S13.0E 99999 H 10600 t V W15 [E0 31 6B 02] W25 [E0 31 6B 02] W15 T > > #S5.0E is the thirst stored position > S5.0E 11700 V 9750 t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t > S5.0E 99999 V 10600 t v W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T > S5.0E 11700 H 9750 t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 t > S5.0E 99999 H 10600 t V W15 [E0 31 6B 03] W25 [E0 31 6B 03] W15 T > > #plugins/rotor.conf > S19.2E = 1 > S13.0E = 2 > S5.0E = 3
What exactly would have to be changed in VDR to do this? Klaus _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
