Hello,

I tried the new version but had no chance to replay or pause the recordings in 
vdr. But at outside it is fine to replay the ts recording.
I am using s2-liplianin driver set. And tried both sd and hd channels also xine 
and xineliboutput plugins with no success.


Best Regards,


> Date: Sun, 12 Apr 2009 11:39:41 +0200
> From: klaus.schmidin...@cadsoft.de
> To: vdr@linuxtv.org
> Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.5
> 
> VDR developer version 1.7.5 is now available at
> 
>       ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.5.tar.bz2
> 
> A 'diff' against the previous version is available at
> 
>       ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.4-1.7.5.diff
> 
> 
> 
> WARNING:
> ========
> 
> This is a *developer* version. Even though *I* use it in my productive
> environment. I strongly recommend that you only use it under controlled
> conditions and for testing and debugging.
> 
> 
> 
> The main focus of this version is still the switch to Transport Stream (TS)
> as the recording format, as well as improved synchronization of replay
> with the progress display, trick modes and subtitles.
> 
> 
> IMPORTANT:
> ==========
> 
> You need the DVB driver version from
> 
>   http://linuxtv.org/hg/~endriss/v4l-dvb
> 
> or, alternatively, apply the two patches
> 
>   http://linuxtv.org/hg/~endriss/v4l-dvb/raw-rev/55fa4f709cf2
>   http://linuxtv.org/hg/~endriss/v4l-dvb/raw-rev/b5567f27fba7
> 
> (in *this* sequence) in order to replay TS recordings with full featured
> DVB cards! The second patch is only required for replaying pure audio
> recordings.
> Users of full featured DVB cards also need to use a new firmware,
> available at
> 
>   http://www.escape-edv.de/endriss/firmware
> 
> Note that the header files in the latest driver versions may be broken.
> If you get compiler error messages like
> 
>   /usr/include/sys/types.h:52: error: conflicting declaration 'typedef 
> __ino64_t ino_t'
>   /usr/include/linux/types.h:14: error: 'ino_t' has a previous declaration as 
> 'typedef __kernel_ino_t ino_t'
> 
> when compiling VDR, you need to put the driver header files back to
> how they were before they got broken. One way of doing this is to
> apply the patch from
> 
>   ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-header-fix.diff
> 
> (I'm not claiming that this is the right way to fix this, since the driver
> developers may have had good reasons for making that change. However, both
> the driver and VDR compile and work fine with this).
> 
> 
> 
> The changes since version 1.7.4:
> 
> - Fixed a hangup when replaying a TS recording with subtitles activated 
> (reported
>   by Timo Helkio).
> - Fixed handling the 'new' indicator in the recordings menu for TS recordings
>   (thanks to Derek Kelly).
> - Added cap_sys_nice to the capabilities that are not dropped (thanks to Rolf
>   Ahrenberg).
> - Updated the Italian OSD texts (thanks to Diego Pierotto).
> - Added cRecordingInfo::GetEvent() (thanks to Marcel Unbehaun).
> - Improved synchronizing the progress display, trick modes and subtitle 
> display
>   to the actual audio/video. This now works independent of any buffer sizes 
> the
>   output device might use.
>   + The cBackTrace class has been replaced with cPtsIndex, which keeps track
>     of the PTS timestamps of recently played frames.
>   + cDevice::GetSTC() is now required to deliver the STC even in trick modes.
>     It is sufficient if it returns the PTS of the most recently presented
>     audio/video frame.
>   + The full-featured DVB cards need an improved firmware in order to return
>     proper STC values in trick modes (thanks to Oliver Endriss for enhancing 
> the
>     av7110 firmware).
> - Adapted cFrameDetector::Analyze() to HD NTSC broadcasts that split frames 
> over
>   several payload units (thanks to Derek Kelly for reporting this and helping 
> in
>   testing).
> - Modified cFrameDetector::Analyze() to make it process whole frames at once, 
> so
>   that file I/O overhead is minimized during recording (reported by Günter
>   Niedermeier).
> - Added command line help for the '-i' option.
> - Fixed cDvbPlayer::NextFile() to handle files larger than 2GB (thanks to Jose
>   Alberto Reguero).
> - Improved replay at the begin and end of a recording. The very first and 
> very last
>   frame is now sent to the output device repeatedly until GetSTC() reports 
> that it
>   has been played. cDvbPlayer::Action() no longer calls DeviceFlush() (thanks 
> to
>   Reinhard Nissl for making sure vdr-xine no longer needs this).
> - Added missing '[]' to the delete operator in 
> cMenuEditStrItem::~cMenuEditStrItem().
> - Added missing virtual destructor to cPalette.
> - Now freeing configDirectory before setting it to a new value in
>   cPlugin::SetConfigDirectory().
> - Fixed a crash when jumping to an editing mark in an audio recording.
> - Fixed the 'VideoOnly' condition in the PlayPes() and PlayTs() calls in
>   cDvbPlayer::Action() (thanks to Reinhard Nissl).
> - cDevice::PlayTs() now plays as many TS packets as possible in one call.
> - Making sure any floating point numbers written use a decimal point (thanks 
> to
>   Oliver Endriss for pointing out a problem with the F record in the info 
> file of
>   a recording).
> - Fixed detecting the frame rate for radio recordings.
> - Added missing AUDIO_PAUSE/AUDIO_CONTINUE calls to cDvbDevice (thanks to 
> Oliver
>   Endriss).
> - No longer writing the video type into channels.conf if VPID is 0 (thanks to
>   Oliver Endriss for reporting this).
> - Improved efficiency of cEIT::cEIT() (thanks to Tobias Bratfisch).
> 
> 
> Have fun!
> 
> Klaus
> 
> _______________________________________________
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

_________________________________________________________________
Sürükle ve Bırak: Windows Live™ Photos ile fotoğraflarınızı kolayca  paylaşımı.
http://www.microsoft.com/windows/windowslive/products/photos.aspx
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Reply via email to