On Thursday 15 January 2009 07:35:15 Harald Milz wrote: > Hi, > > at the moment I use 2 satellites (Astra1 @ 19.2E, Hotbird @ 13.0E) with 3 > budget cards and cables (2x Astra from a quad LNB, 1x Hotbird from a > single) with the capabilities patch. In the future I may need to cut down > the 3 to 2 cards / cables. I know I will need to replace the quad LNB by a > quattro, or maybe both LNBs by two duals. The question is, how can I use a > 3/2 multiswitch, and how will VDR know where the 13.0E programs are, or the > 19.2E, respectively.
I do not think that it is easy to setup with a 3/2 multiswitch. I have found a disec multiswitch for two twin LNBs to two receivers at Conrad Electronics (article no. 257281) for 52 EUR. I think something like that should work well. There are other multiswitches for more receivers available, but they are also more expensive, of course ;-) Kind regards, Stefan _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
