Hi! My VDR with utf-8 is working marvelously, except for a small cosmetic problem. The non-7-bit characters are not shown correctly on my LCD.
The LCD expects characters (i.e. it is no a graphics-LCD, or at least the kernel module isn't), in a certain character set (iso-8859-15 probably but I can't be actually sure, something very similar though). The vdr-lcdproc outputs characters in utf-8 (since I want to use utf-8). So, a utf-8 to iso-8859-15 conversion is required in the chain VDR-lcdproc-LCDd-/dev/lcd0. Currently none of the aforementioned can do the conversion. I can do the wollowing: 'echo ä | iconv -f utf-8 -t iso8859-15 > /dev/lcd0' To show a real "ä" on my LCD. So, I tried the following workaround on my box: - mkfifo fakelcd - tail fakelcd | iconv -f utf-8 -t iso8859-15 > /dev/lcd0 - Point LCDd to fakelcd (this is as I recall I tried it, it was some weeks ago when I did the actual tests) The above would work otherwise, but iconv doesn't "tail" - i.e. it waits for EOF (or something). I could do 'cat somefile > fakelcd', with somefile containing utf-8 characters and it was shown, but that won't work with VDR. Any other suggestions? Also, in your opinion, which one in the chain VDR-lcdproc-LCDd-/dev/lcd0 should be responsible of the conversion of the character set? I'm asking so I know which programs author should I point my whine to =) Cheers! - Ville -- -- Ville Aakko - [EMAIL PROTECTED] _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
