Hi, Girish Venkatachalam schrieb:
>> I recall this behavior when I had a FF card for testing. Maybe it's a >> feature to stop flickering one pixel high horizontal lines in still >> images by doubling one field of the frame. Maybe there exists a switch >> to turn this feature off. >> >> You've tried to repeat an I frame forever. Try to remove the sequence >> end code (00 00 01 B7) from the end of the file before mplexing and the >> MPEG program end code (00 00 01 B9) from the file after mplexing. Maybe >> remove everything up to the first video PES packet from the final file. > > I have no idea what you guys are talking about but have you looked at > mencoder and mplayer's filters? > > Or transcode? Or maybe vdr-image plugin. Supports both StillFrame and PlayPes mode. > There are quite a few filters and smoothing algorithms that you might > like to make use of to remove the jagged effect or other artifacts. > > The bmovl filter might be helpful here. > > Or is it some bug in MPEG or DVB implementation? It seems to be a software/hardware issue. It seems that the FF card displays only a single field of the frame twice (to avoid flickering one pixel horizontal lines on TV) short time after not further data arrives (typical for still frames). And displaying just a single field removes halve of the information to display. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
