is it possible to disable this feature , because sometimes it's useless. For example, if I with rotor-plugin will try to move manually the dish to east or west , this patch automatically will come back the dish to reference rotational position, because LOCK was disappeared.
Igor > This patch was already integrated into VDR 1.3.x with some small > modifications, so VDR 1.4.0 works like that: when "optimized" tuning to > a channel doesn't get a lock within 9 seconds, a "non optimized" tuning > operation is repeated every 9 seconds until a lock succeeds. > > "optimized tuning" means: when you switch from one channel to another > channel on the same polarization, there is no need to send the DiSEqC > commands. Only the tuner needs to tune to a different frequency. > > So "non optimized tuning" means, that the DiSEqC commands are sent > although there is no need to. This fixed tuning issues where the DiSEqC > message got distorted on the way to the multiswitch/LNB with the result > that VDR never successfully tuned in such a case. > _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
