Well,
using the following :
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 T
S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t
S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 T
S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 t
S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 T
S28.2E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t
S28.2E 99999 V 10600 t v W15 [E0 10 38 F9] W15 T
S28.2E 11700 H 9750 t V W15 [E0 10 38 FA] W15 t
S28.2E 99999 H 10600 t V W15 [E0 10 38 FB] W15 T
works perfectly for cards 0 and 2, but not together.
card 1 can't tune to anything else than astra 19.2E ???
And I don't understand why -D0 -D2 don't work neither ?
And you are telling this NOW. The necessary diseqc setup
is VERY different for simple "universal" LNBs and quad LNBs.
I bet your LNBs have four outputs for each combination
of hi/lo freq and polarization.
No, I can connect the DVB cards to any output of the LNB and it
decodes the signal very well.
I am bad a drawing but I try :
************************** **************************
*************************
* Astra 19.2E quad lnb * * Hotbird 13E quad lnb * *Astra 28.2E quad lnb *
************************** **************************
*************************
| | | | | | |
| | | | |
| | | | | | |
| | | | |
************************************************
* disecq 1.0 connected to the 3 lnb and that *
* have four outputs to connect my DVB-s *
************************************************
You really have to know how the LNBs are coupled to
the diseqc switch. Do you have something like 16x2 switch?
That means, inputs for four quad LNBs and outputs
for two (or even more) receivers.
No, quiete simpler here.
No, diseqc.conf designed to be used with universal LNBs
and a diseqc switch is very unlikely to work for your setup.
Well, it works more or less...
Thank,
--
Grégoire FAVRE
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
