VDR maintenance patch 1.4.1-5 is now available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.1-5.diff
This is a 'diff' against version 1.4.1-4 (which is the official
version 1.4.1, patched with
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.1-1.diff,
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.1-2.diff,
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.1-3.diff and
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.1-4.diff).
Small fixes to the officially released VDR versions will be first
made available as "maintenance patches" in the Developer directory,
so that they can be reviewed and tested before a new official
release is published.
So please apply the above patch and report whether it works (or
if it causes any new problems).
Originally I wanted to release an official 1.4.2 today, but then
a few things came up that I also wanted to go into the new version.
Now hopefully this version will prove stable and can be officially
released next sunday ;-)
The changes since version 1.4.1-4:
- Replaced the "quick workaround for additional live audio PIDs" in
cDvbDevice::SetChannelDevice() with an actual solution in
cDvbDevice::SetAudioTrackDevice() in order to prevent sticky PIDs in CAMs,
which caused long switching times or completely blank screens when switching
between encrypted channels on the same transponder (reported by Tomas
Berglund).
- Adapted cThread::ThreadId() to recent kernels (thanks to Ville Skyttä).
- Added --remove-destination to the 'cp' command for binaries in the Makefile to
avoid a crash in case a new version is installed on a running system
(suggested
by Petri Hintukainen).
- Fixed handling "Ca Info" in case the CAM sends this again if the smart card is
replaced with a different one.
Have fun!
Klaus
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
