Hi,
I`m trying to install a 64bit RH guest on top of a 32bit ubuntu intrepid (8.10).
The HW is a thinkpad 61P
Vbox version is 2.1.4
I created the image (Normal 8G), and have the following settings:
OS Type:Red Hat (64 bit)
Base Memory:1024 MB
Video Memory:12 MB
Boot Order:CD/DVD-ROM, Hard Disk
ACPI:Enabled
IO APIC:Enabled
VT-x/AMD-V:Enabled
Nested Paging:Enabled
PAE/NX:Disabled
3D Acceleration:Disabled
I copied the DVD image to a file (make it sure, there are no issues with the
cdrom), and configured it as cdrom.
All the time when I start the virtualbox the operating system starts from the
image, boot menu comes nicely. Then I try to continue, kernel and inintramfs is
getting loaded on the guest, then the whole system is getting frozen (the
host!). Or it reboots. This is the case all the time, so this is not just a
random problem. Has anyone had the same problem?
Here are the last lines from the the VBox.log:
00:00:01.833 CPUMSetGuestCpuIdFeature: Enabled sysenter/exit
00:00:01.833 CPUMSetGuestCpuIdFeature: Enabled PAE
00:00:01.833 CPUMSetGuestCpuIdFeature: Enabled LONG MODE
00:00:01.833 CPUMSetGuestCpuIdFeature: Enabled syscall/ret
00:00:01.833 CPUMSetGuestCpuIdFeature: Enabled LAHF/SAHF
00:00:01.833 WARNING: Can't turn on NXE when the host doesn't support it!!
00:00:01.833 HWACCM: 32-bit and 64-bit guest supported.
00:00:01.833 HWACCM: VMX enabled!
00:00:01.880 VM: Halt method global1 (5)
00:00:01.880 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:01.881 Changing the VM state from 'CREATED' to 'RUNNING'.
00:00:01.890 Guest Log: BIOS: VirtualBox 2.1.4
00:00:01.890 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:02.004 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec
ago) CmdIf1=0x00 (-1 usec ago)
00:00:02.004 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:02.005 Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:02.005 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec
ago) CmdIf1=0x00 (-1 usec ago)
00:00:02.005 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:02.005 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:02.023 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=b2f76000
w=640 h=480 bpp=32 cbLine=0xA00
00:00:04.508 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000
w=720 h=400 bpp=0 cbLine=0x0
00:00:04.554 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:04.584 Guest Log: BIOS: Booting from CD-ROM...
00:00:04.668 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=b2f76000
w=640 h=480 bpp=0 cbLine=0x140
I did not find any useful in the /var/log/messages..
Br,
Tibor Vermes
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users
