Hello, I am currently attempting to benchmark the x410 with the Mellanox ConnectX-5 PCi Card over QSFP with the CG_400 image currently loaded on the x410. I am currently using a 13th gen intel i9-13900KS on the host machine. I currently have a QSFP cable connected between the Mellanox card and the x410
I am following these instructions…https://kb.ettus.com/Getting_Started_with_DPDK_and_UHD However, when I get to the benchmark_rate, I get the following output `./benchmark_rate --rx_rate 491.52e6 --rx_channels 0 --tx_rate 491.52e6 --tx_channels 0 --args "addr=192.168.10.2,use_dpdk=1"` `[INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; DPDK_19.11; UHD_4.5.0.main-2-ga7657c80` `[WARNING] [PREFS] Loaded config from /root/.uhd. This location is considered deprecated, consider moving your config file to /root/.config instead.` `EAL: Detected 32 lcore(s)` `EAL: Detected 1 NUMA nodes` `EAL: Multi-process socket /var/run/dpdk/rte/mp_socket` `EAL: Selected IOVA mode 'PA'` `EAL: No available hugepages reported in hugepages-1048576kB` `EAL: Probing VFIO support...` `EAL: VFIO support initialized` `EAL: PCI device 0000:06:00.0 on NUMA socket -1` `EAL: probe driver: 15b3:1017 net_mlx5` `EAL: PCI device 0000:06:00.1 on NUMA socket -1` `EAL: probe driver: 15b3:1017 net_mlx5` `[ERROR] [DPDK] Could not find route to destination address 192.168.10.2` `[ERROR] [X300] X300 Network discovery error RuntimeError: DPDK: Could not find route to destination address 192.168.10.2` `[00:00:00.000215] Creating the usrp device with: addr=192.168.10.2,use_dpdk=1...` `[ERROR] [DPDK] Could not find route to destination address 192.168.10.2` `[ERROR] [X300] X300 Network discovery error RuntimeError: DPDK: Could not find route to destination address 192.168.10.2` `[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=x4xx,product=x410,serial=328AACC,name=ni-x4xx-328AACC,fpga=CG_400,claimed=False,addr=192.168.10.2,use_dpdk=1` `[ERROR] [DPDK] Could not find route to destination address 192.168.10.2` `[WARNING] [MPMD::XPORT::UDP] Error during MTU discovery on address 192.168.10.2: RuntimeError: DPDK: Could not find route to destination address 192.168.10.2` `[ERROR] [MPMD::MB_IFACE] No CHDR connection available!` `` [INFO] [MPM.PeriphManager] init() called with device args `fpga=CG_400,mgmt_addr=192.168.10.2,name=ni-x4xx-328AACC,product=x410,use_dpdk=1,clock_source=internal,time_source=internal,initializing=True'. `` `Error: RuntimeError: No CHDR connection available!` I am having a difficult time parsing these errors at the moment. Should I move my config file? Does the “x300 network” refer to an ettus device(I have no x3xx connected) or something else? Any suggestions is greatly appreciated. Thanks, Joe
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
