[USRP-users] USRP E310 sg1 does not find its own UHD RF hardware with uhd_usrp_probe --args "type=e300"

[Martin]

Hi,

I have an E310 sg1 which had an older sdimg on it (with uhd 3.9.2). UHD 
worked fine with this older image.

But now I updated the sdcard with the UHD 3.15.0.0 sd image for E310 sg1

usrp_e310_fs.sdimg from e3xx_e310_sg1_sdimg_default-v3.15.0.0.zip

It boots fine but now it does not find its own uhd hardware

This is what I get when I run these commands on the device (through 
serial or ssh)

root@ni-e31x:~# uhd_usrp_probe --args "type=e300"
Error: LookupError: KeyError: No devices found for ----->
Device Address:
    type: e300

root@ni-e31x:~# uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; 
UHD_3.15.0.0-0-gaea0e2de
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
    serial:
    claimed: False
    mgmt_addr: 127.0.0.1
    product:
    reachable: No
    type:


What am I doing wrong here?

Should I use a different device address

I also tried -args "addr=127.0.0.1" But that of course does not work. 
(as expected)

Or maybe it has to do that this is an older sg1 usrp E310.
Does that work differently or maybe the sg1 image is less tested.

Please enlighten me.

Thanks in advance,

Martin Dudok van Heel
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com