Does this IQ calibration function apply to the E310, or any of the AD936x based SDRs?
On Thu, Nov 5, 2020 at 11:57 AM Marcus D Leech via USRP-users <usrp-users@lists.ettus.com> wrote: > > The Val routines use the serial number of the daughter card to index into the > database. It shouldn’t matter where the card is moved. > > Sent from my iPhone > > On Nov 5, 2020, at 10:06 AM, Mark Koenig via USRP-users > <usrp-users@lists.ettus.com> wrote: > > > > Hello, > > > > I have some questions regarding the Rx iq balance function. After running > this script on a particular radio (x310 or N210) with a UBX it saves the > results on the machine in which it was ran on, correct? If I need to move > the UBX to another radio (X310 or N210), but the new radio with the UBX will > be on the same machine, do I need to rerun the IQ balance script? > > > > Is there a scenario I wouldn’t want to always be applying the IQ balance > corrections? > > > > Thanks > > > > Mark > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
