On 10/23/2020 01:07 PM, Daniel Ozer via USRP-users wrote:
Hi everyone,
I'm working on usrp x310 .
After few experiment with the system, i tried to send data from file
source (gnuradio) to my own OOT rfnoc block that do nothing (tready is
always on '1' and one register that count axi_stream data valid) i
saw that the average send rate to the FPGA is 320KB which is low .
The packet size is on the maximum MTU 1500 .
What can I do to make the Software send data faster ?
my setup is :
usrp x310 connected to a switch(with 1Gb ethernet ) and I'm working on
linux-vm( VMWARE) that is on a windows server that is connected to the
same switch .
thanks in advanced
What does the "benchmark_rate" utility report in terms of maximum data
transfer rate using a standard factory FPGA image?
The performance inside a VM is often much less than what you'd get on
"bare metal".
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
