Hi, I was previously working with the USRP X310. I wanted to enable Dual Connectivity mode for enabling two ports with 10 Giga bit connectivity. I ran the update: uhd_image_loader --args "type=x300,addr=192.168.50.2, fpga=XG". Since this, I have not been able to detect my USRP.
*My setup: * Ubuntu is 18.04 and the UHD version is UHD_3.14.1.0-0-gbfb9c1c7 I have connected to the laptop via thunderbolt port which is equivalent to USB-3.0. Firewall is disabled. It is not behind a router/switch. Host interface IP address is 192.168.10.3 and subnet is 255.255.255.0 I have tried the following: 1) Ran as root user - uhd_find_devices, uhd_usrp_probe and uhd_images_downloader. Device is not found in first two options. And, the fpga_default images seem to be up to date. 2) By default, USRPs have addresses from the 192.168.10.XXX range (XXX=2 in factory settings). I searched addresses in this range, but still USRP not detected. Ping to the address also fails. Any suggestions would be appreciated to detect the device! Many thanks in advance. Regards, Saimanoj
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
