On 07/09/2018 01:47 PM, Jacob Knoles wrote:
It seems to be sample-rate agnostic. I ran a few tests using GNURadio
companion at 50M, 1M and 100K sample rates, they all had the same
errors when stopping the flowgraph. For my application I need to run
it at 50M.
After a few runs here I now have a new error too:
RuntimeError: RuntimeError: BIST failed!(code: 1)
The usrp flowgraph would not run until power cycling the usrp.
Side note: the errors do not appear if I kill the flowgraph using the
stop button, as opposed to closing it cleanly.
-----------------------------
Jacob Knoles
Just to clarify, the "Bad CHDR" errors occur *during* streaming?
On Mon, Jul 9, 2018 at 10:02 AM Marcus D. Leech via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
On 07/09/2018 12:07 PM, Jacob Knoles via USRP-users wrote:
I have a simple TX streamer that uses GNURadio in C++ which loads
data from a file into memory followed by a separate flowgraph of
vector source to usrp sink that repeats until closed.
The problem I am having is that in my code, the log just spits out:
"[ERROR] [STREAMER] Error parsing async message packet:
ValueError: Bad CHDR or packet fragment"
many times while streaming. Then when I stop streaming I get this:
[ERROR] [UHD] Exception caught in safe-call.
in __cdecl ctrl_iface_impl::~ctrl_iface_impl(void)
at
z:\gr-build\src-stage1-dependencies\uhd-release_003_011_000_000\host\lib\rfnoc\ctrl_iface.cpp:66
this->peek32(0); -> EnvironmentError: IOError: Block ctrl
(CE_01_Port_40) no response packet - AssertionError: buff->size() > 0
in unsigned __int64 __cdecl ctrl_iface_impl::wait_for_ack(const
bool)
at z:\
\gr-build\src-stage1-dependencies\uhd-release_003_011_000_000\host\lib\rfnoc\ctrl_iface.cpp:187
For me, this is not an isolated issue, no matter what program I
run, be it my own, a uhd example, or a simple gnuradio-companion
app I get these errors. And it seems to be causing my application
to crash or not transmit properly.
Is anyone else having this issue? Is there anything I can do to
fix it? Is this ignorable?
Setup: Windows 10 Home
Intel Core i5
X300
Dual 10g ethernet using Intel X710 adapter
Thanks for any assistance.
-----------------------------
Jacob Knoles
Is this only at high sample rates, or is it sample-rate agnostic?
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
