On 03/21/2018 10:12 PM, Dario Fertonani wrote: > No comments on this? It's a major bug introduced in the new release, in > my opinion. > > Anybody can replicate it by running the official test file linked below, > when compiled with UHD 3.11 from Ubuntu PPA. > > https://github.com/manuts/uhd-examples/blob/master/rx_multi_samples.cpp
Just for the record, this is not the source location for official examples. > Just run it long enough (with proper "nsamps" option), kill it via > CTRL+C while still streaming, then relaunch. It dies instantly with > errors like the following. > > [ERROR] [STREAMER] recv packet demuxer unexpected sid 0x1fffc > [ERROR] [STREAMER] recv packet demuxer unexpected sid 0x10006 > DError: Receiver error ERROR_CODE_OVERFLOW (Out of sequence error) Dario, sorry for the delayed response. We'll need to triage this and see what's going on. Thanks for bringing this up, Martin > > In my case I ran the following command, but the nsamps value doesn't > really matter as long as it's long enough for the user to kill the first > run via CTRL+C. > > $ ./rx_multi_samples --nsamps 10000000 > > > Thanks, > Dario > > > > On Thu, Mar 8, 2018 at 5:30 PM, Dario Fertonani > <[email protected] <mailto:[email protected]>> wrote: > > Thank you Martin, logging is fixed now. > However, something must have changes in the rx_streamer behavior. > Basic receive code that has compiled/worked since the 3.9.x days no > longer works. This is for B210 under Ubuntu 16.04, g++ 5.4, UHD fro > 3.11 from PPA. > > The receiver works the first time after B210 boot (and associated > FPGA image load). Then, after CTRL+C or equivalent interruptions, > the same binary fails right away with these errors (the SID change > at every run) > > [ERROR] [STREAMER] recv packet demuxer unexpected sid 0xfffffff6 > [ERROR] [STREAMER] recv packet demuxer unexpected sid 0xfffcfff5 > > as soon as the recv function is called. This suggests that 1) > there's some stale state from the previous run, and 2) a B210 reboot > clears that state. > Is there a way to clean that state from C++ API? Or, more in > general, a way to get the rx_stream to work without rebooting the board? > > Thanks, > Dario > > On Thu, Mar 8, 2018 at 12:49 PM, Martin Braun > <[email protected] <mailto:[email protected]>> wrote: > > On 03/08/2018 09:56 AM, Dario Fertonani wrote: > > Hi Martin, > > > > Our code doesn't compile on Ubuntu 16.04 with UHD 3.11 from PPA (UHD > > 3.10.x works well). This is on "amd64" ark, with g++ that dies out > with > > a missing header (copied below) > > > > fatal error: uhd/utils/msg.hpp: No such file or directory > > > > > > I can probably fix the headers with some trial and error, but > there's a > > deeper question: Did anything significant change in the "msg" API? > > Dario, > > everything related to the logging API (msg.hpp falls into this > category) > was completely re-done between 3.10 and 3.11. I'll refer to the > manual > page: http://files.ettus.com/manual/page_logging.html > <http://files.ettus.com/manual/page_logging.html> > > ...and this email: > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2017-April/024653.html > > <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2017-April/024653.html> > > -- M > > > > > Thanks, > > Dario > > > > > > On Mon, Mar 5, 2018 at 1:51 PM, Martin Braun via USRP-users > > <[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>> wrote: > > > > Two more comments: > > > > - Binary installers are currently building and will be > made available > > shortly on the usual spots: Ubuntu PPA is here: > > https://launchpad.net/~ettusresearch/+related-packages > <https://launchpad.net/~ettusresearch/+related-packages> > > <https://launchpad.net/~ettusresearch/+related-packages > <https://launchpad.net/~ettusresearch/+related-packages>> > > > > ...and Windows+Fedora binaries will be published here: > > > http://files.ettus.com/binaries/uhd/uhd_003.011.000.000-release/ > <http://files.ettus.com/binaries/uhd/uhd_003.011.000.000-release/> > > > <http://files.ettus.com/binaries/uhd/uhd_003.011.000.000-release/ > <http://files.ettus.com/binaries/uhd/uhd_003.011.000.000-release/>> > > > > (but aren't there yet). > > > > - Because we changed out dev model, you will need to > manually reset > > maint branch if you're tracking that on git. The following > commands will > > work: > > > > $ git checkout maint > > $ git remote update > > $ git reset --hard @{u} > > > > Cheers, > > Martin > > > > > > On 03/05/2018 12:20 PM, Martin Braun wrote: > > > Hi all, > > > > > > today we've tagged the release for UHD 3.11.0.0. We > found a bunch of > > > issues during RC testing, but not enough to warrant > another release > > > candidate. > > > Some of the issues we fixed were actually > usability-related, but there > > > was an actual bug with the images downloader, which > might not properly > > > update the correct images after doing git pull, and we > found and > > fixed a > > > bug in the X300 firmware which manifests as the GPSDO > not being found > > > (if you were running master branch with the X300, we > highly recommend > > > upgrading). > > > > > > There is one known N310 issue which is still open as of > this release: > > > When running UHD natively on the device in a > multi-threading scenario, > > > it is possible to encounter race conditions which lead > to UHD dropping > > > command packets. We will be releasing a bugfix release > within a few > > > weeks to address this issue, along with anything else we > might > > have missed. > > > > > > Please find the tag on github here: > > > > > > > https://github.com/EttusResearch/uhd/releases/tag/release_003_011_000_000 > > <https://github.com/EttusResearch/uhd/releases/tag/release_003_011_000_000> > > > > <https://github.com/EttusResearch/uhd/releases/tag/release_003_011_000_000 > > <https://github.com/EttusResearch/uhd/releases/tag/release_003_011_000_000>> > > > > > > Cheers! > > > > > > Martin > > > > > > > > > Changelog: > > > ## 003.011.000.000 > > > * N310: Added driver > > > * UBX: Add support for CAL antenna for Rev E > > > * Added the module peripheral manager (MPM) with all > subcomponents > > (N310 > > > drivers, mpm_shell, RPC server, BIST, etc.) > > > * UHD: Added rpclib as a internally tracked dependency > > > * UHD: Reduced the usage of Boost > > > * UHD: Updated uhd_images_downloader: Now uses more > elaborate manifest > > > to optimize downloads > > > * UHD: Introduced uhdlib internal include paths > > > * UHD: Add support for configuration files. USRP > settings can now > > be set > > > using a uhd.conf file in addition to device args > > > * UHD: Add narrow and narrow_cast > > > * gr-usrptest: Various bugfixes > > > * Updated required Vivado version to 2017.4 > > > * Updated all license headers to use SPDX identifiers > and correctly > > > identify Ettus Research as part of National Instruments > > > * This release includes all bugfixes and features from > previous > > > releases, in particular, the 3.10.* release cycle > > > > > > > > > _______________________________________________ > > USRP-users mailing list > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com> > > > <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>> > > > > > > > _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
