Hi Matheou, When using Virtualbox and a X310 connected through USB, every time the Ettus rebooted after an image updating I had to go the Virtualbox menu and select the device again from the list of connected USB devices to make the virtual machine recognize it. Perhaps you're skipping this step?
Regards, Leo. On Sat, Jul 15, 2017 at 5:08 PM Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users <usrp-users@lists.ettus.com> wrote: > I have followed Nate's advice, at least I think, and things are still not > working... > > Again, the firmware is loading (thus assuming USB connection is > recognizing unit and transmitting info), but once the software process of > loading the firmaware is done, I hear the unhooking Windows sound of a USB > device and then I get the no Devices Loaded message in the screen. > > I hope to figure this out this weekend. If not, I will try to get a > laptop that has Linux loaded already on the laptop/PC. > > Thanks > > -----Original Message----- > From: USRP-users [mailto:usrp-users-boun...@lists.ettus.com] On Behalf Of > Jacqueline.Walker via USRP-users > Sent: Saturday, July 15, 2017 11:54 AM > To: usrp-users@lists.ettus.com > Subject: Re: [USRP-users] Very Close - Trying to Connect B210 Using VMware > > Hi, > > I have a similar problem with a B200 on a Linux VM (archlinux) but I am > using VMware (Workstation Player 12). I do have USB 3.0 enabled and the VM > can see a USB 3.0 hard drive but it can't see the B200. Is there a similar > solution for VMware ? > > thanks > Jacqueline > ________________________________________ > From: USRP-users [usrp-users-boun...@lists.ettus.com] on behalf of Nate > Temple via USRP-users [usrp-users@lists.ettus.com] > Sent: 14 July 2017 18:33:28 > To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] > Cc: usrp-users@lists.ettus.com > Subject: Re: [USRP-users] Very Close - Trying to Connect B210 Using VMware > > Hi Konstanitn, > > I assume you mean you are using VirtualBox, not VMWare. > > You will need to add a USB Filtering rule for the USRP within the settings > for the virtual machine (within VirtualBox settings). > > You will need to add a rule for VID: 2500 PID: 0020 for the B210. > > Also, you need replace the value "<install-path>" with the path to which > UHD is installed, commonly this is /usr/local/. uhd_images_downloader will > be located /usr/local/lib/uhd/utils/uhd_image_downloader.py > > Regards, > Nate Temple > > > > On Jul 14, 2017, at 9:28 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN > TECHNOLOGIES INC] via USRP-users <usrp-users@lists.ettus.com> wrote: > > > > > > Hello to everyone. I am a novice to the B210. My main first task is to > hookup the B210 to the laptop via Oracle VMware (Virtual machine). > > > > I realize this may not be the most admired approach, but I think i am > very close in getting the B210 connected. btw, after many hours of hurdles > that i found out already. > > > > I hope you can review the screen shot first. > > Comments/Facts > > > > 1) the B210 is USB 3.0 > > 2) I already installed Windows host.guest USB 3.0 driver and Oracle > VMware extensions pack to allow the USB 3.0 to pass from the Windows 7 OS > to the virtual Ubuntu 16.04 OS. I hear the beep noise when I open the > Vmware software. Thus, giving a good sign that the Linux OS as detected > the USB 3.0 port of the B210. > > 3) When running the 'uhd_find_devices' at the terminal prompt, a > message come up stating that I needed to update the B210 image by running > the folling python code -/usr/lib/uhd/utils/uhd_images_downloader.py - This > seemed to update a driver. > > 4) I then unplugged the B210 and reset the Linux software. > > 5) But then when I ran the 'uhd_find_devices' command in the terminal, i > received No UHD Devices Found. > > > > At this time, I am out of ideas, thus if anyone can help out in > assisting me in getting tthings connected with the current approach. > > > > Thanks > > > > Konstanitn > > > > > > > > Have a little more info that might help. Look at the screenshot. i > have a B210, but it shows it is trying to load a b200 hex file to > firmware. This happens when I unplug and plug the USB port in. May this > be the issue? > > > > Thanks > > > > > > > > <image.png><image1.png>_______________________________________________ > > USRP-users mailing list > > USRP-users@lists.ettus.com > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
