config in each component in the manner described by Steve to re-iterate
Install JRE on a windows2003 box
Install Apache Tomcat (which runs on the JRE) on windows2003 box
Pay particular attention to installing ISAPI redirector as this will allow
IIS to handoff JSP/Servlet specific requests to Tomcat
Backup the registry before touching it
Edit the registry as instructed at
http://www.iis-resources.com/modules/AMS/article.php?storyid=485&page=3
pay particular attention to 64 bit binaries and registry settings you may
nned to config
Now you'll need to startup the processes so follow
http://www.iis-resources.com/modules/AMS/article.php?storyid=485&page=4
so the goal is to configure IIS6 to NOT to run in IIS5 Isolation Mode in
order to get it to work properly but to have Tomcat worker process execute
within IIS6
(IIS is now coming around to implement process execute security as with the
scenario that IIS wants this worker process to run and which authentication
do I use)
http://www.microsoft.com/resources/documentation/iis/6/all/proddocs/en-us/ca_aboutsrvrapps.mspx
Create the Tomcat Application Pool..remember IIS is in charge of handing out
system resources so be sure to config in PLENTY of apps for Tomcat will
handle
Create the Virtual Directory for Tomcat to run
Pay attention to requirements for locating any new Tomcat Application Pool
virtual folders to be same as parent (in other words unless told different
use the same virtual folder)
Create and enable the WebService redirector
Make suggested mods to workers2.properties for Tomcat examples
Execute sample code
http://localhost/jsp-examples
Comprends?
Martin--
This email message and any files transmitted with it contain confidential
information intended only for the person(s) to whom this email message is
addressed. If you have received this email message in error, please notify
the sender immediately by telephone or email and destroy the original
message without making a copy. Thank you.
----- Original Message -----
From: "Brantley Hobbs" <[EMAIL PROTECTED]>
To: "Tomcat Users List" <users@tomcat.apache.org>
Sent: Tuesday, April 10, 2007 12:10 PM
Subject: Re: Tech support
David,
Unless you really want to part with some money, perhaps you could take
another swing at it.
First, make sure you're configuring the ISAPI redirector correctly. I
have attached the following example files for you:
1. A sample workers.properties file (this maps workers to tomcat
instances).
2. A sample uriworkermap.properties file (this maps a given URL to a
set of workers).
3. A .reg file that will set the thing up in the registry. You'll want
to make sure to edit the paths and such to whereever you dropped your
files.
4. A text document describing how to install all of this.
You'll probably need to tweak some of it, but perhaps it can get you
started.
Second, check for this:
http://marc.theaimsgroup.com/?l=tomcat-user&m=106251758316868&w=2
HTH,
Brantley
Liles, David - Kansas City, MO wrote:
I have a new server (Windows 2003 / IIS 6) and Tomcat 5.5. I have spent
the past three days trying to get IIS to forward java (.jsp and Struts
.do) requests to Tomcat with no success.
I am looking for someone who can remote in and configure the necessary
settings.
The configuration will need to be able to support multiple web site
entries. Each web site will be a unique Tomcat host entry.
Please contact me with questions and estimates.
Thank you
-David
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------------------
FROM:
http://marc.theaimsgroup.com/?l=tomcat-user&m=106251758316868&w=2
--------snip------------
[prev in list] [next in list] [prev in thread] [next in thread]
List: tomcat-user
Subject: Re: Win2003 IIS6 ISAPI filter problem
From: John Turner <tomcat-user () johnturner ! com>
Date: 2003-09-02 15:45:36
[Download message RAW]
Excellent. Thank you for posting this, many IIS users have posted to
the list trying to get the redirector to work with IIS 6.
John
Nick Tatham wrote:
I posted this thread back in June-03 as I was having problems making the
ISAPI \
redirector work under IIS 6 on Windows 2003. Now thanks entirely to
Andrew Duey of \
TerraScan Inc., I now have this working.
If you are using IIS V6, which ships with Windows Server 2003, you must
allow the \
Web Service Extension to operate. Earlier versions of IIS did not require
this \
step.
Using the IIS Internet Services Manager, click on the Web Services
Extensions item \
in the left hand pane. In the right hand pane add a new Web Service
Extension \
called, say, Tomcat ISAPI and browse and set the required file for this
extension \
to the isapi_redirect.dll and set the status to allowed. Then restart
IIS.
It appears that no changes are needed to the standard Tomcat ISAPI
redirector for \
this version of IIS.
I hope this helps someone else.
Nick
--
Nick Tatham
Peramon Technology Limited
+44 118 984 0506
www.peramon.com
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure | About MARC | Support MARC | Got a list to add? | 10East is
Hiring!
--------snip------------
--------------------------------------------------------------------------------
worker.list=lbAims,lbJSP
worker.lbAims.type=lb
worker.lbAims.balanced_workers=aims00
worker.lbJSP.type=lb
worker.lbJSP.balanced_workers=goose
worker.aims00.type=ajp13
worker.aims00.host=aims00.itos.uga.edu
worker.aims00.port=8009
worker.aims00.cachesize=10
worker.aims00.cache_timeout=600
worker.aims00.socket_keepalive=1
worker.aims00.socket_timeout=300
worker.aims00.lbfactor=1
worker.aims01.type=ajp13
worker.aims01.host=aims01.itos.uga.edu
worker.aims01.port=8009
worker.aims01.cachesize=10
worker.aims01.cache_timeout=600
worker.aims01.socket_keepalive=1
worker.aims01.socket_timeout=300
worker.aims01.lbfactor=1
worker.maverick.type=ajp13
worker.maverick.host=maverick.itos.uga.edu
worker.maverick.port=8009
worker.maverick.cachesize=10
worker.maverick.cache_timeout=600
worker.maverick.socket_keepalive=1
worker.maverick.socket_timeout=300
worker.maverick.lbfactor=1
worker.goose.type=ajp13
worker.goose.host=goose.itos.uga.edu
worker.goose.port=8009
worker.goose.cachesize=10
worker.goose.cache_timeout=600
worker.goose.socket_keepalive=1
worker.goose.socket_timeout=300
worker.goose.lbfactor=1
--------------------------------------------------------------------------------
1. Check your workers.properties and uriworkermap.properties files for
correctness.
2. Double-click "mod_jk_isapi.reg" and merge the new information into the
registry.
3. Add the ISAPI filter to the webserver:
a. Right-click "Web Sites" in the IIS manager and select "properties".
b. On the "ISAPI Filters" tab, click "Add"
c. For "Filter Name", type "Jakarta"
d. For "Executable", browse to the actual ISAPI redirect DLL file
e. "OK" all the dialogs and then perform an IIS reset
The ISAPI Redirect filter has been installed in the webserver, but each
site that will
use it has one final step remaining.
4. For each individual web site that need a redirect:
a. Right-click the website in the IIS manager and select "New" ->
"Virtual Directory"
b. For "Alias", type "Jakarta"
c. For "Path", browse for the folder containing the ISAPI redirect DLL
file
d. Allow the "Read" and "Execute" permissions
5. An IIS reset may or may not be required
NOTE: For IIS 6, you may have explicitly permit the filter to execute by
adding a rule
to the Web Services Extension ruleset. Look for the file named
"TIP-Setting up ISAPI Filters in IIS 6.txt" in the main Webmaster VSS
project for details.
--------------------------------------------------------------------------------
ÿþWindows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation]
[HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Jakarta Isapi
Redirector]
[HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Jakarta Isapi
Redirector\1.0]
"extension_uri"="/jakarta/isapi_redirect_1.2.13.dll"
"log_file"="W:\\Tomcat Connectors\\jk1.log"
"log_level"="debug"
"worker_file"="W:\\Tomcat Connectors\\workers.properties"
"worker_mount_file"="W:\\Tomcat Connectors\\uriworkermap.properties"
--------------------------------------------------------------------------------
/servlet=lbAims
/servlet/*=lbAims
/gsdiviewer=lbAims
/gsdiviewer/*=lbAims
/GSDIMetadata=lbAims
/GSDIMetadata/*=lbAims
/GISTViewer=lbAims
/GISTViewer/*=lbAims
/GlobalMap=lbAims
/GlobalMap/*=lbAims
/GISTMetadata=lbAims
/GISTMetadata/*=lbAims
/concernmatrix=lbAims
/concernmatrix/*=lbAims
/slCatalog=lbJSP
/slCatalog/*=lbJSP
/nahrgisjsp=lbJSP
/nahrgisjsp/*=lbJSP
/gema=lbJSP
/gema/*=lbJSP
/gdc=lbJSP
/gdc/*=lbJSP
/ted=lbJSP
/ted/*=lbJSP
--------------------------------------------------------------------------------
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
