I'm seeing a lot of stuff -- mostly depricated (in process jni, ajp12). Also
there's no need for the load balancer unless you actually have two or more
tomcat instances to connect to. At the very least, remove the extra space on
the worker.list line of your mod_jk.properties file. I would recommend going
further and reducing your mod_jk.properties file to this, adding stuff back in
only when this works:
workers.apache_log=/path/to/apache/log/dir
ps=/
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13.host=192.168.10.235
worker.ajp13.type=ajp13
--David
Danish wrote:
David Smith wrote:
We need details of your mod_jk config. Also are there any network
stumbling blocks like a firewall in between? Can you use the manager
webapp on the tomcat server (not through mod_jk) to confirm that
servlets_examples is available?
--David
Danish wrote:
Hi,
Im not able to access my jsp pages on a tomcat running on a different
machine using the apache2 webserver on localhost. Iv used mod_jk.
Looking at the logs, mod_jk is initialised when the webserver starts and
viewing the catalina.out shows that ajp13 listening on /0.0.0.0:8009
But when I attempt to access the jsp pages I get the URL not found error.
Below is the mod_jk.log file
[Mon Oct 09 13:50:46 2006] [8628:54976] [debug] jk_child_init::mod_jk.c
(2316): Initialized mod_jk/1.2.14
[Mon Oct 09 13:50:51 2006] [8625:54976] [debug]
map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI
'/servlets-examples/' from 0 maps
Im using apache2 webserver on Fedora4 and tomcat on RHEL3
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
I have attached my workers.properties file. I apologise if u had asked
for something else as I have not been able to understand exactly what u
had requested.
------------------------------------------------------------------------
# workers.properties -
#
# This file provides jk derived plugins with the needed information to
# connect to the different tomcat workers. Note that the distributed
# version of this file requires modification before it is usable by a
# plugin.
#
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them in your own configuration!!!
#
# Whenever you see a set of lines such as:
# x=value
# y=$(x)\something
#
# the final value for y will be value\something
#
# Normaly all you will need to do is un-comment and modify the first three
# properties, i.e. workers.tomcat_home, workers.java_home and ps.
# Most of the configuration is derived from these.
#
# When you are done updating workers.tomcat_home, workers.java_home and ps
# you should have 3 workers configured:
#
# - An ajp12 worker that connects to localhost:8007
# - An ajp13 worker that connects to localhost:8009
# - A jni inprocess worker.
# - A load balancer worker
#
# However by default the plugins will only use the ajp12 worker. To have
# the plugins use other workers you should modify the worker.list property.
#
#
# OPTIONS ( very important for jni mode )
#
# workers.tomcat_home should point to the location where you
# installed tomcat. This is where you have your conf, webapps and lib
# directories.
#
workers.tomcat_home=/var/tomcat/
#
# workers.java_home should point to your Java installation. Normally
# you should have a bin and lib directories beneath it.
#
workers.java_home=/usr/local/jdk1.5.0_06/
#
# You should configure your environment slash... ps=\ on NT and / on UNIX
# and maybe something different elsewhere.
#
ps=/
#
#------ ADVANCED MODE ------------------------------------------------
#---------------------------------------------------------------------
#
#
#------ DEFAULT worket list ------------------------------------------
#---------------------------------------------------------------------
#
#
# The workers that your plugins should create and work with
#
# Add 'inprocess' if you want JNI connector
worker.list=ajp12, ajp13
# , inprocess
#
#------ DEFAULT ajp12 WORKER DEFINITION ------------------------------
#---------------------------------------------------------------------
#
#
# Defining a worker named ajp12 and of type ajp12
# Note that the name and the type do not have to match.
#
worker.ajp12.port=8007
worker.ajp12.host=192.168.10.235
worker.ajp12.type=ajp12
#
# Specifies the load balance factor when used with
# a load balancing worker.
# Note:
# ----> lbfactor must be > 0
# ----> Low lbfactor means less work done by the worker.
worker.ajp12.lbfactor=1
#
#------ DEFAULT ajp13 WORKER DEFINITION ------------------------------
#---------------------------------------------------------------------
#
#
# Defining a worker named ajp13 and of type ajp13
# Note that the name and the type do not have to match.
#
worker.ajp13.port=8009
worker.ajp13.host=192.168.10.235
worker.ajp13.type=ajp13
#
# Specifies the load balance factor when used with
# a load balancing worker.
# Note:
# ----> lbfactor must be > 0
# ----> Low lbfactor means less work done by the worker.
worker.ajp13.lbfactor=1
#
# Specify the size of the open connection pool.
#worker.ajp13.connection_pool_size
#
#------ DEFAULT LOAD BALANCER WORKER DEFINITION ----------------------
#---------------------------------------------------------------------
#
#
# The loadbalancer (type lb) workers perform wighted round-robin
# load balancing with sticky sessions.
# Note:
# ----> If a worker dies, the load balancer will check its state
# once in a while. Until then all work is redirected to peer
# workers.
worker.loadbalancer.type=lb
worker.loadbalancer.balanced_workers=ajp12, ajp13
#
#------ DEFAULT JNI WORKER DEFINITION---------------------------------
#---------------------------------------------------------------------
#
#
# Defining a worker named inprocess and of type jni
# Note that the name and the type do not have to match.
#
worker.inprocess.type=jni
#
#------ CLASSPATH DEFINITION -----------------------------------------
#---------------------------------------------------------------------
#
#
# Additional class path components.
#
worker.inprocess.class_path=$(workers.tomcat_home)$(ps)lib$(ps)tomcat.jar
#
# Setting the command line for tomcat.
# Note: The cmd_line string may not contain spaces.
#
worker.inprocess.cmd_line=start
# Not needed, but can be customized.
#worker.inprocess.cmd_line=-config
#worker.inprocess.cmd_line=$(workers.tomcat_home)$(ps)conf$(ps)server.xml
#worker.inprocess.cmd_line=-home
#worker.inprocess.cmd_line=$(workers.tomcat_home)
#
# The JVM that we are about to use
#
# This is for Java2
#
# Windows
worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)jvm.dll
# IBM JDK1.3
#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)libjvm.so
# Unix - Sun VM or blackdown
#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)classic$(ps)libjvm.so
#
# And this is for jdk1.1.X
#
#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)bin$(ps)javai.dll
#
# Setting the place for the stdout and stderr of tomcat
#
worker.inprocess.stdout=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stdout
worker.inprocess.stderr=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stderr
#
# Setting the tomcat.home Java property
#
#worker.inprocess.sysprops=tomcat.home=$(workers.tomcat_home)
#
# Java system properties
#
# worker.inprocess.sysprops=java.compiler=NONE
# worker.inprocess.sysprops=myprop=mypropvalue
#
# Additional path components.
#
# worker.inprocess.ld_path=d:$(ps)SQLLIB$(ps)bin
#
#<VirtualHost 172.50.1.2>
# ServerName 172.50.1.2
# JkMount /servlets-examples/* ajp12
# JkMount /servlets-examples/*.htm ajp12
# JkMount /servlets-examples/*.do ajp12
# JkMount /servlets-examples/*.jsp ajp12
# JkMount /servlets-examples/* ajp12
# JkMount /servlets-examples ajp12
# JkMount /servlets-examples/servlet/* ajp12
#</VirtualHost>
#<VirtualHost 172.50.1.2>
# ServerName 172.50.1.2
# JkMount /servlets-examples/* ajp13
# JkMount /servlets-examples/*.htm ajp13
# JkMount /servlets-examples/*.do ajp13
# JkMount /servlets-examples/*.jsp ajp13
# JkMount /servlets-examples/* ajp13
# JkMount /servlets-examples ajp13
# JkMount /servlets-examples/servlet/* ajp13
#</VirtualHost>
------------------------------------------------------------------------
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
