> Tom Schulz wrote:
>> I am not sure if this is a bug or a usage problem.
>>
>> I have been running spamd on Solaris 10 and Perl v5.8.9 for years,
>> starting
>> it with the command:
>> spamd -d -c -m 18 --min-spare=1 --max-spare=4 --syslog-socket=inet
>>
>> I upgraded Perl to v5.20.1 and installed the current modules. When I
>> try to start spamd with that command, I get the following errors:
>>
>> setlogsock(): type='tcp': TCP service unavailable at
>> /opt/local/lib/perl5/site_perl/5.20.1/Mail/SpamAssassin/Logger/Syslog.pm
>> line 100.
>
> This one is normal if your syslogd listens only on an UDP socket.
>
> The setlogsock("inet") tries TCP first, and if that fails it tries UDP.
> When warnings are enabled (like in spamd), you see the TCP attempt
> failure as a warning, but then the UDP is used.
>
> So if you know the syslogd only listens on UDP, you should
> specify this explicitly: --syslog-socket=udp
>
> I don't know if this worked differently previously. Possibly the
> version of Sys::Syslog brought some changes in warnings issued.
>
>
>> server socket setup failed, retry 1: spamd: could not create
>> IO::Socket::IP socket on [::1]:783: Cannot assign requested address
>> server socket setup failed, retry 2: spamd: could not create
>> IO::Socket::IP socket on [127.0.0.1]:783: Address already in use
>>
>> And spamd does not start. If I add '-4' to the above command [...]
>> And spamd does start and I do have logging.
>
>> I conclude that the failed attempt to create an IPv6 socket blocks
>> the ability to later create IPv4 sockets to the same port.
>
> Yes, so it seems.
>
> Please start spamd without option '-d' (daemonize) and with '-D spamd',
> and note the logged order of socket bind attempts. Mine shows:
>
> dbg: spamd: socket module of choice: IO::Socket::IP 0.32, Socket 2.015,
> have PF_INET, have PF_INET6, using Socket::getaddrinfo, AI_ADDRCONFIG is
> supported
> dbg: spamd: socket specification: "localhost", IP address: localhost,
> port: 783
> dbg: spamd: attempting to listen on IP addresses: 127.0.0.1, ::1, port
> 783
> dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr:
> 127.0.0.1, LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 1, V6Only: 1
> dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr: ::1,
> LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 1, V6Only: 1
>
> Note the order: tries 127.0.0.1 first, only then the ::1.
> Note also the reported 'V6Only: 1' and a version of IO::Socket::IP
> (or maybe it's IO::Socket::INET6 in your case???).
>
>> But note that with
>> Perl v5.8.9 and the module versions available in Dec 2013, there was no
>> problem without the '-4' switch. This sounds like it could be a bug
>> somewhere.
>
>
>> And why does setlogsock complain about type='tcp now when
>> it did not with the older Perl?
>
> Probably unrelated to a version of perl, but has to do with
> a version of Sys::Syslog or a version of the 'warnings' pragma.
>
> Mark
Here is my debug output. It looks like the socket is created for
127.0.0.1 and then an attempt is also made for ::1. That fails as
expected. But in my case that failure causes a retry that includes
retrying for 127.0.0.1. This now fails because the port has already
been created (as noted in the error message). Retries then continue
until the retry limit is reached.
dbg: spamd: socket module of choice: IO::Socket::IP 0.32, Socket 2.013,
have PF_INET, have PF_INET6, using Socket::getaddrinfo, AI_ADDRCONFIG is
supported
dbg: spamd: socket specification: "localhost", IP address: localhost,
port: 783
dbg: spamd: attempting to listen on IP addresses: 127.0.0.1, ::1, port
783
dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr:
127.0.0.1, LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 2, V6Only: 1
dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr: ::1,
LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 2, V6Only: 1
server socket setup failed, retry 1: spamd: could not create
IO::Socket::IP socket on [::1]:783: Cannot assign requested address
dbg: spamd: attempting to listen on IP addresses: 127.0.0.1, ::1, port
783
dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr:
127.0.0.1, LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 2, V6Only: 1
server socket setup failed, retry 2: spamd: could not create
IO::Socket::IP socket on [127.0.0.1]:783: Address already in use
dbg: spamd: attempting to listen on IP addresses: 127.0.0.1, ::1, port
783
dbg: spamd: creating IO::Socket::IP socket: Listen: 128, LocalAddr:
127.0.0.1, LocalPort: 783, Proto: tcp, ReuseAddr: 1, Type: 2, V6Only: 1
server socket setup failed, retry 3: spamd: could not create
IO::Socket::IP socket on [127.0.0.1]:783: Address already in use
Tom Schulz
Applied Dynamics Intl.
sch...@adi.com
