Great to hear you've arrived at a solution and very happy we could help!
I'm also very pleased you posted here - as you say, perhaps someone else
will need this.
Cheers
Charlie
On 08/03/2022 13:00, Dominic Humphries wrote:
Hey folks,
you might remember me posting a while back about a problem we were having
with upgrading: We were using 8.3 with no major problems, but when we tried
upgrading to the latest Solr we saw slower response times and increased
failures, to the point where we couldn't even consider upgrading.
Initial suspicion fell on the JVM's GC because the heap was getting huge.
We also worried about thread creation, disk performance, and a few other
things. Along the way we spotted that our issue seemed to be connected to
external files that were getting read after every refresh, since emptying
the files cured the issue.
But we needed them for boosts!
Long story short, with some help from the good folks at
OpenSourceConnections, we finally got things resolved!
It turns out that our problem was caused by refreshes causing followers to
switch to a new searcher, which blocked until it had imported the external
file. So first we tried adding the config suggested by the docs to set up
listeners:
<listener event="newSearcher"
class="org.apache.solr.schema.ExternalFileFieldReloader"/>
<listener event="firstSearcher"
class="org.apache.solr.schema.ExternalFileFieldReloader"/>
These initially seemed to break everything - solr simply didn't want to
restart with these lines in place. Eventually though, we discovered that it
*did* restart if left long enough (over ten mins!) and after finally
starting up with this config in place, our performance issues largely went
away!
We removed some soft commit config we had on our followers since there was
no real need for it there and it was part of the reason for slowdown; we
also changed to the StandardDirectoryFactory for best possible performance.
This brought the restart down to a mere(!) three minutes, which was just
about acceptable for our use case. All these changes together gave us
graceful switching over from old searcher to new without losing any
requests.
We also added lifecycle hooks to our AWS instances to ensure that our
followers would be put into service as soon as they were fully refreshed
and up-to-date, but not before. This removed our worries about any slowness
on startup meaning out-of-date (or failed) search results.
We're halfway through upgrading our Solr infrastructure now, to 8.11.1 and
we're seeing great results - we actually get less errors than with 8.3 - so
we're expecting to be fully updated by the end of the week, and with better
performance to boot!
Thanks all for your advice in the long process of troubleshooting this
issue, and hopefully this write-up will give anybody else suffering in the
same way some ideas on how to solve it :)
Dom
--
Charlie Hull - Managing Consultant at OpenSource Connections Limited
Founding member of The Search Network <http://www.thesearchnetwork.com>
and co-author of Searching the Enterprise
<https://opensourceconnections.com/wp-content/uploads/2020/08/ES_book_final_journal_version.pdf>
tel/fax: +44 (0)8700 118334
mobile: +44 (0)7767 825828
OpenSource Connections Europe GmbH | Pappelallee 78/79 | 10437 Berlin
Amtsgericht Charlottenburg | HRB 230712 B
Geschäftsführer: John M. Woodell | David E. Pugh
Finanzamt: Berlin Finanzamt für Körperschaften II
--
This email has been checked for viruses by AVG.
https://www.avg.com
