I had the same problem and I solved it...
In samba-tool script there is a line in the code, which reads:
sys.path.insert("python").
Underneath that put this:
sys.path.insert("/usr/local/samba/lib/python2.7/site-packages")
Likewise, in file openchange_newuser (for adding openchange user), there is:
sys.path.append("python")
so, you will have to add underneath it
sys.path.append("/usr/local/samba/lib/python2.7/site-packages").
Hope it works for you as it did for me.
On Sat, Dec 10, 2011 at 1:37 PM, Doug Campbell <[email protected]
> wrote:
> Following the instructions in the SOGo Native Microsoft Outlook
> Configuration for v2.0 Beta 3 on a Fedora 15 machine, I get all the way
> through the process until the section "Adding Users".
>
> At this point when I enter:
>
> cd ~/openchange/sogo/samba4
>
> sudo ./bin/samba-tool domain passwordsettings set --complexity=off
>
> I receive the following error:
>
> Traceback (most recent call last):
> File "./bin/samba-tool", line 30, in <module>
> from samba.netcmd.domain import cmd_domain
> File "bin/python/samba/netcmd/domain.py", line 44, in <module>
> from samba.samba3 import Samba3
> File "bin/python/samba/samba3/__init__.py", line 29, in <module>
> import passdb
> ImportError: /usr/local/samba/lib/ldb/libccan.so.0: version
> `SAMBA_4.0.0ALPHA17' not found (required by
> /usr/local/samba/lib/libsmbconf.so.0)
>
> I then tried based on what another user wrote:
>
> sudo PYTHONPATH=../python ./bin/samba-tool domain passwordsettings set
> --complexity=off
>
> and received the following error:
>
> Traceback (most recent call last):
> File "./bin/samba-tool", line 26, in <module>
> from samba import netcmd
> File "bin/python/samba/__init__.py", line 29, in <module>
> import samba.param
> ImportError: No module named talloc
>
>
> Then I did the following based on some more research:
>
> yum install pytalloc
>
> and run again:
>
> sudo PYTHONPATH=../python ./bin/samba-tool domain passwordsettings set
> --complexity=off
>
> and still get this:
>
> Traceback (most recent call last):
> File "./bin/samba-tool", line 26, in <module>
> from samba import netcmd
> File "bin/python/samba/__init__.py", line 49, in <module>
> import ldb
> ImportError: No module named ldb
>
>
> Then I try (since I have no clue as to why this isn't working):
>
> yum install pyldb
>
> and run again:
>
> sudo PYTHONPATH=../python ./bin/samba-tool domain passwordsettings set
> --complexity=off
>
> and the result now is this:
>
> Traceback (most recent call last):
> File "./bin/samba-tool", line 26, in <module>
> from samba import netcmd
> File "bin/python/samba/__init__.py", line 49, in <module>
> import ldb
> ImportError: /usr/local/samba/lib/libpyldb-util.so.1: version
> `PYLDB_UTIL_1.0.0' not found (required by
> /usr/lib/python2.7/site-packages/ldb.so)
>
>
> Some other info that may be helpful:
>
> [root@localhost samba4]# ldconfig -p | grep "libpyldb"
> libpyldb-util.so.1 (libc6) =>
> /usr/local/samba/lib/libpyldb-util.so.1
> libpyldb-util.so.1 (libc6) => /usr/lib/libpyldb-util.so.1
> libpyldb-util.so (libc6) => /usr/local/samba/lib/libpyldb-util.so
>
> And:
>
> [root@localhost samba4]# nm /usr/lib/libpyldb-util.so.1
> nm: /usr/lib/libpyldb-util.so.1: no symbols
>
> [root@localhost samba4]# nm /usr/local/samba/lib/libpyldb-util.so.1 |
> grep "PYLDB_UTIL"
> 00000000 A PYLDB_UTIL_1.1.2
>
>
> Obviously, I am doing something wrong but what is wrong isn't obvious to
> me. Would appreciate any help.
>
> Thanks!
>
--
[email protected]
https://inverse.ca/sogo/lists
