Hi Marcos, > > The dnsmasq service running on the KVM host manages the IP assignment during > the first > deployment phase. > How did you deploy your KVM host? Which configurations have you done on it > before running > the hosted-engine --deploy? > Also, what is your full hosted-engine deployment command? > I deployed the KVM hosts using the guide at:
https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line/index.html (section 4.2 Installing Enterprise Linux Hosts) and https://www.ovirt.org/download/install_on_rhel.html Most of the ovirt packages were installed from the installation of the ovirt-engine-appliance. The KVM hosts are using EL 9.3. I've tried on two different EL hosts: one with the standard ovirt-45 repos, and the other had the nightly builds enabled. I observed the same issues on both. I haven't changed any specific settings, such as networking or storage. The full command to deploy the engine VM was done via: hosted-engine --deploy --4 I have just setup glusterfs just as a temporary storage option now (yet to run the deploy again), though I'm not sure how to get ovirt to use it. As mentioned I don't know whether this or the networking is causing it to fail. In case it is important, I notice that virtnetworkd.socket systemd unit gets killed during the deployment, and has to be restarted otherwise the deployment fails prematurely. It also masks all the libvirtd systemd units as part of the cleanup, and these have to manually unmasked and several need manually restarting (virtnetword.socket, virtqemud.socket and virtstoraged.sock) before the deployment is run again or the deploy will fail on trying to communicate with these. Thanks very much for the help, let me know if any further information needed. Cam > > -----Original Message----- > From: iucounu(a)gmail.com <iucounu(a)gmail.com> > Sent: Tuesday, January 23, 2024 12:49 PM > To: users(a)ovirt.org > Subject: [ovirt-users] Re: [External] : Re: can hosted engine deploy use > local repository > mirrors instead of internet ones? > > Thanks very for the reply Marcos. I tried another deployment, just to see if > "wait > for the host to be up" would time out, and I saw a couple of errors in the > log: > > From the ovirt-hosted-engine-setup-ansible-final_clean log, it mentions that > the VM IP is > undefined: > > 2024-01-23 12:50:19,554+0000 DEBUG > otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:109 {'msg': "The task includes an option with > an undefined variable. The error was: 'local_vm_ip' is undefined. > 'local_vm_ip' is undefined\n\nThe error appears to be in > '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/sync_on_engine_machine.yml': > line 2, column 3, but may\nbe elsewhere in the file depending on the exact > syntax > problem.\n\nThe offending line appears to be:\n\n---\n- name: Set the name > for add_host\n > ^ here\n", '_ansible_no_log': False} > > In the ovirt-hosted-engine-setuplog, it mentions not being able to get the > storage pool: > > > 2024-01-23 12:50:35,787+0000 DEBUG > otopi.ovirt_hosted_engine_setup.ansible_utils > ansible_utils._process_output:109 {'changed': True, 'stdout': '', > 'stderr': "error: failed to get pool 'localvmvy8whst5'\nerror: > Storage pool not found: no storage pool with matching name > 'localvmvy8whst5'", 'rc': 1, 'cmd': ['virsh', > '-c', 'qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf', > 'pool-destroy', 'localvmvy8whst5'], 'start': '2024-01-23 > 12:50:35.558666', 'end': '2024-01-23 12:50:35.611808', > 'delta': '0:00:00.053142', 'msg': 'non-zero return code', > 'invocation': {'module_args': {'_raw_params': 'virsh -c > qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf pool-destroy > localvmvy8whst5', '_uses_shell': False, 'stdin_add_newline': True, > 'strip_empty_ends': True, 'argv': None, 'chdir': None, > 'executable': None, 'creates': None, 'removes': None, > 'stdin': None}}, 'stdout_lines': [], 'stderr_lines': ["error: > failed to get pool 'localvmvy8whst5'", "error: Storage pool not fou > nd: no storage pool with matching name 'localvmvy8whst5'"], > '_ansible_no_log': None} > > I set the IP to the one I have assigned in DNS, but when I attach to the > console of the VM > (which is still running, though the disk image has been deleted) via virsh, > it shows me a > completely different IP: In hosted-engine --deploy, I set a 10.0.0.x address, > however, it > shows a 192.168.1.x address on the VM. Do I need to set this somewhere else, > e.g., with > '--ansible-extra-vars=he_ipv4_subnet_prefix='? > > As for the storage pool, is that for later VM deployment? The deploy script > did not ask me > for a storage location. If I need to specify this, where do I do this? > > Thanks again for any help, > > Kind regards, > > Cam > > PS: is there a simple way to have the answers saved so I don't have to keep > running > through all the questions every time I try a deployment > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: > https://urldefense.com/v3/__https://www.ovirt.org/privacy-policy.html__;!... > oVirt Code of Conduct: > https://urldefense.com/v3/__https://www.ovirt.org/community/about/communi... > List Archives: > https://urldefense.com/v3/__https://lists.ovirt.org/archives/list/users@o... _______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/CTVWFFDKBGYJPLNKQVBQKN57ELCTNGLT/
