On the HostedEngineLocal VM [root@testvirt ~]# yum repolist enabled repo id repo name AppStream CentOS-8 - AppStream BaseOS CentOS-8 - Base PowerTools CentOS-8 - PowerTools extras CentOS-8 - Extras ovirt-4.4 Latest oVirt 4.4 Release ovirt-4.4-advanced-virtualization Advanced Virtualization packages for x86_64 ovirt-4.4-centos-gluster7 CentOS-8 - Gluster 7 ovirt-4.4-centos-opstools CentOS-8 - OpsTools - collectd ovirt-4.4-centos-ovirt44 CentOS-8 - oVirt 4.4 ovirt-4.4-copr:copr.fedorainfracloud.org:mdbarroso:ovsdbapp Copr repo for ovsdbapp owned by mdbarroso ovirt-4.4-copr:copr.fedorainfracloud.org:networkmanager:NetworkManager-1.22 Copr repo for NetworkManager-1.22 owned by networkmanager ovirt-4.4-copr:copr.fedorainfracloud.org:nmstate:nmstate-0.2 Copr repo for nmstate-stable owned by nmstate ovirt-4.4-copr:copr.fedorainfracloud.org:sac:gluster-ansible Copr repo for gluster-ansible owned by sac ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection Copr repo for EL8_collection owned by sbonazzo ovirt-4.4-epel Extra Packages for Enterprise Linux 8 - x86_64 ovirt-4.4-pre oVirt 4.4 Pre-Release ovirt-4.4-virtio-win-latest virtio-win builds roughly matching what will be shipped in upcoming RHEL
and on the Hypervisor [root@n001 ~]# yum repolist enabled repo id repo name AppStream CentOS-8 - AppStream BaseOS CentOS-8 - Base PowerTools CentOS-8 - PowerTools extras CentOS-8 - Extras ovirt-4.4 Latest oVirt 4.4 Release ovirt-4.4-advanced-virtualization Advanced Virtualization packages for x86_64 ovirt-4.4-centos-gluster7 CentOS-8 - Gluster 7 ovirt-4.4-centos-opstools CentOS-8 - OpsTools - collectd ovirt-4.4-centos-ovirt44 CentOS-8 - oVirt 4.4 ovirt-4.4-copr:copr.fedorainfracloud.org:mdbarroso:ovsdbapp Copr repo for ovsdbapp owned by mdbarroso ovirt-4.4-copr:copr.fedorainfracloud.org:networkmanager:NetworkManager-1.22 Copr repo for NetworkManager-1.22 owned by networkmanager ovirt-4.4-copr:copr.fedorainfracloud.org:nmstate:nmstate-0.2 Copr repo for nmstate-stable owned by nmstate ovirt-4.4-copr:copr.fedorainfracloud.org:sac:gluster-ansible Copr repo for gluster-ansible owned by sac ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection Copr repo for EL8_collection owned by sbonazzo ovirt-4.4-epel Extra Packages for Enterprise Linux 8 - x86_64 ovirt-4.4-pre oVirt 4.4 Pre-Release ovirt-4.4-virtio-win-latest virtio-win builds roughly matching what will be shipped in upcoming RHEL On Tue, Oct 20, 2020 at 4:54 AM Sandro Bonazzola <[email protected]> wrote: > > > Il giorno lun 19 ott 2020 alle ore 19:03 Edward Berger < > [email protected]> ha scritto: > >> with those packages installed I was able to run the single node >> hyperconverged wizard, >> but it fails during deploy "Hosted Engine Deployment" with >> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update setup packages] >> [ INFO ] skipping: [localhost] >> [ INFO ] TASK [ovirt.ovirt.engine_setup : Update all packages] >> [ ERROR ] fatal: [localhost -> testvirt.bil.psc.edu]: FAILED! => >> {"changed": false, "failures": [], "msg": "Depsolve Error occured: \n >> Problem: cannot install the best update candidate for package >> ovirt-engine-metrics-1.4.1.1-1.el8.noarch\n - nothing provides >> rhel-system-roles >= 1.0-19 needed by >> ovirt-engine-metrics-1.4.2-1.el8.noarch", "rc": 1, "results": []} >> [ INFO ] TASK [ovirt.ovirt.engine_setup : Clean temporary files] >> [ INFO ] changed: [localhost -> testvirt.bil.psc.edu] >> >> I can 'virsh console HostedEngineLocal' and yum update there says >> [root@testvirt ~]# yum update >> Last metadata expiration check: 0:03:58 ago on Mon 19 Oct 2020 12:52:54 >> PM EDT. >> Error: >> Problem: cannot install the best update candidate for package >> ovirt-engine-metrics-1.4.1.1-1.el8.noarch >> - nothing provides rhel-system-roles >= 1.0-19 needed by >> ovirt-engine-metrics-1.4.2-1.el8.noarch >> (try to add '--skip-broken' to skip uninstallable packages or '--nobest' >> to use not only best candidate packages) >> >> >> > can you please provide output of: "yum repolist enabled" ? > thanks > > > > > >> >> >> >> On Mon, Oct 19, 2020 at 12:25 PM Edward Berger <[email protected]> >> wrote: >> >>> I'm installing 4.4.3-pre on CentOS8.2 and it seems the glusterfs-server >>> and gluster-ansible-roles RPMs aren't installed, >>> with the ovirt-cockpit which pulls other dependencies. >>> >>> This caused the cockpit hyperconverged installer to fail. It mentions >>> the roles rpm but not the glusterfs >>> with the role installed, failure comes up when it tries to setup the >>> firewall for non-existing glusterfs-server. >>> >>> It is similarly missing on 4.4.2-release. >>> (the quick installation instructions are missing this or its a bug) >>> >>> >>> On Mon, Oct 19, 2020 at 4:31 AM Lev Veyde <[email protected]> wrote: >>> >>>> oVirt 4.4.3 Fifth Release Candidate is now available for testing >>>> >>>> The oVirt Project is pleased to announce the availability of oVirt >>>> 4.4.3 Fifth Release Candidate for testing, as of October 16th, 2020. >>>> >>>> This update is the third in a series of stabilization updates to the >>>> 4.4 series. >>>> How to prevent hosts entering emergency mode after upgrade from oVirt >>>> 4.4.1 >>>> >>>> Note: Upgrading from 4.4.2 GA should not require re-doing these steps, >>>> if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only >>>> required to be done once. >>>> >>>> Due to Bug 1837864 >>>> <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter >>>> emergency mode after upgrading to latest build >>>> >>>> If you have your root file system on a multipath device on your hosts >>>> you should be aware that after upgrading from 4.4.1 to 4.4.3 you may get >>>> your host entering emergency mode. >>>> >>>> In order to prevent this be sure to upgrade oVirt Engine first, then on >>>> your hosts: >>>> >>>> 1. >>>> >>>> Remove the current lvm filter while still on 4.4.1, or in emergency >>>> mode (if rebooted). >>>> 2. >>>> >>>> Reboot. >>>> 3. >>>> >>>> Upgrade to 4.4.3 (redeploy in case of already being on 4.4.3). >>>> 4. >>>> >>>> Run vdsm-tool config-lvm-filter to confirm there is a new filter in >>>> place. >>>> 5. >>>> >>>> Only if not using oVirt Node: >>>> - run "dracut --force --add multipathâ to rebuild initramfs with >>>> the correct filter configuration >>>> 6. >>>> >>>> Reboot. >>>> >>>> Documentation >>>> >>>> - >>>> >>>> If you want to try oVirt as quickly as possible, follow the >>>> instructions on the Download <https://ovirt.org/download/> page. >>>> - >>>> >>>> For complete installation, administration, and usage instructions, >>>> see the oVirt Documentation <https://ovirt.org/documentation/>. >>>> - >>>> >>>> For upgrading from a previous version, see the oVirt Upgrade Guide >>>> <https://ovirt.org/documentation/upgrade_guide/>. >>>> - >>>> >>>> For a general overview of oVirt, see About oVirt >>>> <https://ovirt.org/community/about.html>. >>>> >>>> Important notes before you try it >>>> >>>> Please note this is a pre-release build. >>>> >>>> The oVirt Project makes no guarantees as to its suitability or >>>> usefulness. >>>> >>>> This pre-release must not be used in production. >>>> Installation instructions >>>> >>>> For installation instructions and additional information please refer >>>> to: >>>> >>>> https://ovirt.org/documentation/ >>>> >>>> This release is available now on x86_64 architecture for: >>>> >>>> * Red Hat Enterprise Linux 8.2 or newer >>>> >>>> * CentOS Linux (or similar) 8.2 or newer >>>> >>>> This release supports Hypervisor Hosts on x86_64 and ppc64le >>>> architectures for: >>>> >>>> * Red Hat Enterprise Linux 8.2 or newer >>>> >>>> * CentOS Linux (or similar) 8.2 or newer >>>> >>>> * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) >>>> >>>> See the release notes [1] for installation instructions and a list of >>>> new features and bugs fixed. >>>> >>>> Notes: >>>> >>>> - oVirt Appliance is already available for CentOS Linux 8 >>>> >>>> - oVirt Node NG is already available for CentOS Linux 8 >>>> >>>> Additional Resources: >>>> >>>> * Read more about the oVirt 4.4.3 release highlights: >>>> http://www.ovirt.org/release/4.4.3/ >>>> >>>> * Get more oVirt project updates on Twitter: https://twitter.com/ovirt >>>> >>>> * Check out the latest project news on the oVirt blog: >>>> http://www.ovirt.org/blog/ >>>> >>>> >>>> [1] http://www.ovirt.org/release/4.4.3/ >>>> >>>> [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ >>>> >>>> -- >>>> >>>> Lev Veyde >>>> >>>> Senior Software Engineer, RHCE | RHCVA | MCITP >>>> >>>> Red Hat Israel >>>> >>>> <https://www.redhat.com> >>>> >>>> [email protected] | [email protected] >>>> <https://red.ht/sig> >>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> >>>> _______________________________________________ >>>> Users mailing list -- [email protected] >>>> To unsubscribe send an email to [email protected] >>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>>> oVirt Code of Conduct: >>>> https://www.ovirt.org/community/about/community-guidelines/ >>>> List Archives: >>>> https://lists.ovirt.org/archives/list/[email protected]/message/3CRWW4EMTGHRVGGJM6EY4DUEEM6QJKBI/ >>>> >>> _______________________________________________ >> Users mailing list -- [email protected] >> To unsubscribe send an email to [email protected] >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/[email protected]/message/C7EUNXTFUU265BSOKKBDGE5FO7E4BR64/ >> > > > -- > > Sandro Bonazzola > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA <https://www.redhat.com/> > > [email protected] > <https://www.redhat.com/> > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours. > <https://mojo.redhat.com/docs/DOC-1199578>* > > > * <https://www.redhat.com/it/forums/emea/italy-track>* >
_______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/2GG7OKYDE43FJCW3ORLFMQVE5ZI2FINA/
