Hi Kasturi, I just tried to set, using the oVirt Engine UI, a fake gateway (different from the real one) for the ovirtmgmt network attached to the hosts. After that, I set again the old and real gateway: it seems that, at the end, the new configuration has been stored correctly in the oVirt Engine environment.
[root@glu01 ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gateway 0.0.0.0 UG 0 0 0 ens33 link-local 0.0.0.0 255.255.0.0 U 1002 0 0 ens33 link-local 0.0.0.0 255.255.0.0 U 1003 0 0 ens34 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 ens34 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33 It seems that, finally, the ovirtmgmt network configuration has been updated with the right gateway value. Thanks for your feedback. Mauro > Il giorno 04 set 2017, alle ore 09:48, Kasturi Narra <[email protected]> ha > scritto: > > Hi Mauro, > > yes, i do know this problem of gateway disappearing but i am not sure > why that happens because in my case it was happening on only on one server. I > used to add the gateway again on that node. I am just waiting for some one to > reply. > > Thanks > kasturi > > On Mon, Sep 4, 2017 at 1:02 PM, Mauro Tridici <[email protected] > <mailto:[email protected]>> wrote: > Hi Kasturi, > > thank you very much for your support and for the useful explanation. > If possible, I would ask you if you know a way to correct the “missing > gateway” problem that I described in my previous message. > > Thanks a lot, > Mauro > > >> Il giorno 04 set 2017, alle ore 08:51, Kasturi Narra <[email protected] >> <mailto:[email protected]>> ha scritto: >> >> Hi Mauro, >> >> Creating distributed dispersed volumes are not supported from ovirt >> UI yet but you should be able to sync them if cluster is imported into the >> UI. same holds true for add / remove bricks on disperse and distribute >> disperse volumes. >> >> you wont be able to see bricks created because ovirt excepts them to >> be mounted at /rhgs/<brick-name>. What you could simply do is uncheck the >> check box in the 'Add brick' dialog and type in the path or you could mount >> your bricks at above said location and that would show all the available >> bricks on the host. >> >> Hope this helps. >> >> Thanks >> kasturi. >> >> On Sat, Sep 2, 2017 at 7:16 PM, Mauro Tridici <[email protected] >> <mailto:[email protected]>> wrote: >> Hi all, >> >> I just started my first Ovirt Engine deploy using a dedicated (and >> separated) virtual machine. >> I’m trying to create and manage a test Gluster cluster using 3 “virtual” >> hosts (hostnames are glu01, glu02, glu03) >> 2 different networks have been defined on the hosts (192.168.213.0/24 >> <http://192.168.213.0/24> for management network and 192.168.152.0/24 >> <http://192.168.152.0/24> for gluster network). >> Ovirt engine deploy completed without any problem, the hosts have been added >> easily using ovirtmgmt network (bridgeless mgmt network) and ovirtgluster >> (bridgeless gluster network). >> >> Everything seems to be ok for this first deploy, but I just noticed that the >> gateway is missing on the target hosts: >> >> [root@glu01 ~]# route >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric Ref Use Iface >> link-local 0.0.0.0 255.255.0.0 U 1002 0 0 ens33 >> link-local 0.0.0.0 255.255.0.0 U 1003 0 0 ens34 >> 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 ens34 >> 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33 >> >> [root@glu02 ~]# route >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric Ref Use Iface >> link-local 0.0.0.0 255.255.0.0 U 1002 0 0 ens33 >> link-local 0.0.0.0 255.255.0.0 U 1003 0 0 ens34 >> 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 ens34 >> 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33 >> >> [root@glu03 ~]# route >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric Ref Use Iface >> link-local 0.0.0.0 255.255.0.0 U 1002 0 0 ens33 >> link-local 0.0.0.0 255.255.0.0 U 1003 0 0 ens34 >> 192.168.152.0 0.0.0.0 255.255.255.0 U 0 0 0 ens34 >> 192.168.213.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33 >> >> Due to this problem I cannot reach internet from ens33 nic (management >> network). >> I just tried to add the gateway in ifcfg-ens33 configuration file but >> gateway disappear after host reboot. >> >> [root@glu01 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens33 >> # Generated by VDSM version 4.19.28-1.el7.centos >> DEVICE=ens33 >> ONBOOT=yes >> IPADDR=192.168.213.151 >> NETMASK=255.255.255.0 >> BOOTPROTO=none >> MTU=1500 >> DEFROUTE=no >> NM_CONTROLLED=no >> IPV6INIT=yes >> IPV6_AUTOCONF=yes >> >> The oVirt Engine network configuration is the following one: >> >> [host glu01] >> ens33 -> ovirtmgmt (192.168.213.151, 255.255.255.0, 192.168.213.2) >> ens34 -> ovirtgluster (192.168.152.151, 255.255.255.0) >> >> [host glu02] >> ens33 -> ovirtmgmt (192.168.213.152, 255.255.255.0, 192.168.213.2) >> ens34 -> ovirtgluster (192.168.152.152, 255.255.255.0) >> >> [host glu03] >> ens33 -> ovirtmgmt (192.168.213.153, 255.255.255.0, 192.168.213.2) >> ens34 -> ovirtgluster (192.168.152.153, 255.255.255.0) >> >> Do you know the right way to set the gateway IP on all hosts? >> >> Just two last questions: I was able to import an existing gluster cluster >> using oVirt Engine, but I’m not able to create a new volume because: >> >> - I can’t select a distributed disperse volume configuration from oVirt >> Engine volume creation window >> - i can’t see the bricks to be used to create a new volume (but I can import >> an existing volume without problem). >> >> Is there something that I can do to resolve the issues and complete my first >> experience with oVirt? >> >> Thank you very much, >> Mauro T. >> >> >> _______________________________________________ >> Users mailing list >> [email protected] <mailto:[email protected]> >> http://lists.ovirt.org/mailman/listinfo/users >> <http://lists.ovirt.org/mailman/listinfo/users> >> >> > > > ------------------------- Mauro Tridici Fondazione CMCC CMCC Supercomputing Center presso Complesso Ecotekne - Università del Salento - Strada Prov.le Lecce - Monteroni sn 73100 Lecce IT http://www.cmcc.it mobile: (+39) 327 5630841 email: [email protected]
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
