I did start the hosted engine on the host I've applied the patch but
I've forgot to restart ovirt-ha-agent, and now it works.
Great job, thanks
Best regards,
Arsène
On 04/19/2017 03:39 PM, Martin Sivak wrote:
> I've applied the patch on one off my host and restarted the hosted
engine as you wrote but it didn't help,
> the console button is still grayed out and not available.
Are you sure the host with the patch applied was used to start the
engine? Btw, you need to restart the ovirt-ha-agent service first
before restarting the engine VM.
Best regards
Martin Sivak
On Wed, Apr 19, 2017 at 3:17 PM, Arsène Gschwind
<[email protected] <mailto:[email protected]>> wrote:
Hi,
I've applied the patch on one off my host and restarted the hosted
engine as you wrote but it didn't help, the console button is
still grayed out and not available.
Rgds,
Arsène
On 04/18/2017 02:20 PM, Evgenia Tokar wrote:
Hi,
Thanks for bringing the issue to our attention and for answering
the questions.
There is a patch to fix this: https://gerrit.ovirt.org/#/c/75515/
<https://gerrit.ovirt.org/#/c/75515/>
After applying the patch a restart to the hosted engine vm is
required (not just the engine).
Let me know if you are still experiencing issues with this.
Thanks,
Jenny
On Wed, Apr 12, 2017 at 8:05 PM, Rafał Wojciechowski
<[email protected] <mailto:[email protected]>> wrote:
hi,
I will answer also. however I am using single hypervisor so
without ha and I have no performed steps:
https://www.ovirt.org/documentation/how-to/hosted-engine/
<https://www.ovirt.org/documentation/how-to/hosted-engine/>
1. yes - however I have to start in headless mode so it is
quite obvius
if I am trying to start with spice/vnc console I am getting
segfault from libvirtd
2. as above
3. as above
W dniu 12.04.2017 o 14:12, Arsène Gschwind pisze:
Hi all,
I will answer your questions:
1. definitively yes
2. the command hosted-engine --console works well and I'm
able to connect.
3. Here are the device entries
devices={device:qxl,alias:video0,type:video,deviceId:5210a3c3-9cc4-4aed-90c6-432dd2d37c46,address:{slot:0x02,
bus:0x00,domain:0x0000,type:pci,function:0x0}}
devices={device:console,type:console}
Thanks and rgds,
Arsène
On 04/12/2017 10:53 AM, Evgenia Tokar wrote:
Hi all,
I have managed to reproduce this issue and opened a bug for
tracking it:
https://bugzilla.redhat.com/show_bug.cgi?id=1441570
<https://bugzilla.redhat.com/show_bug.cgi?id=1441570> .
There is no solution yet, but I would appreciate if any who
encountered this issue will answer some questions:
1. Is the console button greyed out in the UI?
2. On the hosted engine host, does the command
hosted-engine --console fails?
If it fails, try upgrading ovirt-hosted-engine-ha on
the hosted engine host. We had a bug related to this issue
that was fixed
(https://bugzilla.redhat.com/show_bug.cgi?id=1364132
<https://bugzilla.redhat.com/show_bug.cgi?id=1364132>).
After upgrade and restart of the vm, this should work,
and you should be able to connect to the console.
3. On the hosted engine host look at the content of:
/var/run/ovirt-hosted-engine-ha/vm.conf
Does it contain a graphical device? Or a console device?
Thanks,
Jenny
On Mon, Apr 10, 2017 at 11:44 AM, Martin Sivak
<[email protected] <mailto:[email protected]>> wrote:
Hi,
we are working on that, we can only ask for patience
now, Jenny was trying to find out what happened and how
to fix it all week.
Best regards
--
Martin Sivak
SLA / oVirt
On Mon, Apr 10, 2017 at 9:38 AM, Rafał Wojciechowski
<[email protected]
<mailto:[email protected]>> wrote:
hi,
I have similiar issue(I also started my mailthread)
after upgrade 4.0 to 4.1
Version 4.1.1.8-1.el7.centos (before it was some
4.1.0.x or similiar - update not fixed it)
to run VM I have to set in Console tab Headless
mode - without it I got libvirtd segfault(logs
attached in my mailthread).
So I am able to run VMs only without Console - do
you also have to set headless before run VM?
I noticed that libvirt-daemon was also upgraded to
2.0 version during ovirt upgrade - I dont think
that 4.1 was not testes due to such libvirtd
upgrade... but maybe?
Regards,
Rafal Wojciechowski
W dniu 10.04.2017 o 08:24, Arsène Gschwind pisze:
Hi,
After updating to oVirt 4.1.1 Async release i can
confirm that the problem still persists.
Rgds,
Arsène
On 03/25/2017 12:25 PM, Arsène Gschwind wrote:
Hi,
After updating to 4.1.1 i'm observing the same
behavior, HE without any console.
Even when trying to edit the HE VMs it doesn't
change anything, Graphics stays to NONE.
Thanks for any Help.
Regards,
Arsène
On 03/24/2017 03:11 PM, Nelson Lameiras wrote:
Hello,
When upgrading my test setup from 4.0 to 4.1, my
engine vm lost it's console (from SPICE to None
in GUI)
My test setup :
2 manually built hosts using centos 7.3, ovirt 4.1
1 manually built hosted engine centos 7.3, oVirt
4.1.0.4-el7, accessible with SPICE console via GUI
I updated ovirt-engine from 4.1.0 to 4.1.1 by
doing on engine :
- yum update
- engine-setup
- reboot engine
When accessing 4.1.1 GUI, Graphics is set to
"None" on "Virtual Machines" page, with "console
button" greyed out (all other VMs have the same
Graphics set to the same value as before)
I tried to edit engine VM settings, and console
options are same as before (SPLICE, QXL).
I'm hopping this is not a new feature, since if
we loose network on engine, console is the only
way to debug...
Is this a bug?
ps. I was able to reproduce this bug 2 times
cordialement, regards,
<https://www.lyra-network.com/>
Nelson LAMEIRAS
Ingénieur Systèmes et Réseaux/ Systems and
Networks engineer
Tel: +33 5 32 09 09 70
[email protected]
<mailto:[email protected]>
www.lyra-network.com
<https://www.lyra-network.com/> | www.payzen.eu
<https://payzen.eu>
<https://www.youtube.com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA>
<https://www.linkedin.com/company/lyra-network_2>
<https://twitter.com/LyraNetwork>
<https://payzen.eu>
------------------------------------------------------------------------
Lyra Network, 109 rue de l'innovation, 31670
Labège, FRANCE
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der
Universität Basel IT Services Klingelbergstr.
70 | CH-4056 Basel | Switzerland Tel. +41 79
449 25 63 <tel:+41%2079%20449%2025%2063> |
http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: [email protected]
<mailto:[email protected]> | +41 61 267 14 11
<tel:+41%2061%20267%2014%2011>
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der
Universität Basel IT Services Klingelbergstr.
70 | CH-4056 Basel | Switzerland Tel. +41 79 449
25 63 <tel:+41%2079%20449%2025%2063> |
http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: [email protected]
<mailto:[email protected]> | +41 61 267 14 11
<tel:+41%2061%20267%2014%2011>
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list [email protected]
<mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität
Basel IT Services Klingelbergstr. 70 | CH-4056 Basel |
Switzerland Tel. +41 79 449 25 63
<tel:+41%2079%20449%2025%2063> | http://its.unibas.ch
<http://its.unibas.ch/> ITS-ServiceDesk:
[email protected] <mailto:[email protected]> | +41
61 267 14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |
http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: [email protected]
<mailto:[email protected]> | +41 61 267 14 11
<tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: [email protected] | +41 61 267 14 11
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
