Hello Steffen,
can your nodes resolve the FQDN "ovirtengine.com
<http://ovirtengine.com>" to the hosted engine ip ( nslookup
ovirtengine.com <http://ovirtengine.com>) ?
If that works have you tried to disable the firewall
temporarily?
2016-11-04 14:11 GMT+01:00 Steffen Nolden
<[email protected]
<mailto:[email protected]>>:
Hello,
i tried to deploy hosted-engine on a testing
environment. First of all i tried to deploy with the option
"Automatically execute engine-setup on the engine
appliance on first boot (Yes, No)[Yes]? Yes"
but it got stuck.
[ INFO ] Running engine-setup on the appliance
[ ERROR ] Engine setup got stuck on the appliance
[ ERROR ] Failed to execute stage 'Closing up': Engine
setup is stalled on the appliance since 600 seconds ago.
Please check its log on the appliance.
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104112913.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system
is not reliable, please check the issue,fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log
Next try i said 'No' and i tried to execute it myself.
But i can't access the engine appliance.
[nolden@oVirtNode01 ~]$ sudo hosted-engine --console
/usr/share/vdsm/vdsClient.py:33: DeprecationWarning:
vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is
deprecated, please use vdsm.jsonrpcvdscli
from vdsm import utils, vdscli, constants
The engine VM is running on this host
Verbunden mit der Domain: HostedEngine
Escape-Zeichen ist ^]
Fehler: Interner Fehler: Charakter-Einheit console0
verwendet nicht ein PTY
Additionally i can't ping or access the engine appliance
via ssh.
Did i forget to install a packege or configure something?
Below my infrastructure and configs. Attached the log file.
Thanks for help.
My infrastructure is a nestedVM system:
All systems have nested visualization activated
HW with LinuxMint x86_64;
- VM with CentOS-7-x86_64; 24GB Ram; 7 cores;
- Nested VM with CentOS-7-x86_64; 12288GB Ram; 4
cores; Hostname: oVirtNode01.com (192.168.122.101): Here
i deploy hosted-engine, Hostname: oVirtEngine.com
(192.168.122.201)
- Nested VM with CentOS-7-x86_64; 4096GB Ram; 1
cores; Hostname: oVirtNode02.com (192.168.122.102):
- Nested VM with CentOS-7-x86_64; 4096GB Ram; 1
cores; Hostname: oVirtNode03.com (192.168.122.103):
All three NestedVMs are updated, have installed the
ovirt-release40.rpm. Additional installed:
screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2),
vdsm-gluster (4.18.13), bridge-utils (1.5),
vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server
(3.7.16), samba.
First NestedVM additional installed
ovirt-engine-appliance 4.0-20160928.1.el7.centos
The three VMs building a glusterfs volume "engine" 3
replica, with the options...
Volume Name: engine
Type: Replicate
Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214
Status: Started
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: oVirtNode01.com:/gluster/engine/brick1
Brick2: oVirtNode02.com:/gluster/engine/brick1
Brick3: oVirtNode03.com:/gluster/engine/brick1
Options Reconfigured:
auth.allow: 192.168.122.*
storage.owner-gid: 36
storage.owner-uid: 36
performance.readdir-ahead: on
## Session 1 (hosted-engine deploy without automatically
execute engine-setup)
[nolden@oVirtNode01 ~]$ sudo hosted-engine --deploy
/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15:
DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6
xmlrpc is deprecated, please use vdsm.jsonrpcvdscli
import vdsm.vdscli
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
Continuing will configure this host for
serving as hypervisor and create a VM where you have to
install the engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]:
[ INFO ] Hardware supports virtualization
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Generating libvirt-spice certificates
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
Please specify the storage you would like to
use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs
[ INFO ] Please note that Replica 3 support is required
for the shared storage.
Please specify the full shared storage
connection path to use (example: host:/path):
oVirtNode01.com:/engine
[ INFO ] GlusterFS replica 3 Volume detected
[ INFO ] Installing on first host
[ INFO ] GlusterFS replica 3 Volume detected
--== SYSTEM CONFIGURATION ==--
--== NETWORK CONFIGURATION ==--
iptables was detected on your computer, do you
wish setup to configure it? (Yes, No)[Yes]: No
Please indicate a pingable gateway IP address
[192.168.122.1]:
Please indicate a nic to set ovirtmgmt bridge
on: (eth0) [eth0]:
--== VM CONFIGURATION ==--
Booting from cdrom on RHEL7 is ISO image based
only, as cdrom passthrough is disabled (BZ760885)
Please specify the device to boot the VM from
(choose disk for the oVirt engine appliance)
(cdrom, disk, pxe) [disk]:
Please specify the console type you would like
to use to connect to the VM (vnc, spice) [vnc]:
[ INFO ] Detecting available oVirt engine appliances
The following appliance have been found on
your system:
[1] - The oVirt Engine Appliance image
(OVA) - 4.0-20160928.1.el7.centos
[2] - Directly select an OVA file
Please select an appliance (1, 2) [1]:
[ INFO ] Verifying its sha1sum
[ INFO ] Checking OVF archive content (could take a few
minutes depending on archive size)
[ INFO ] Checking OVF XML content (could take a few
minutes depending on archive size)
[WARNING] OVF does not contain a valid image
description, using default.
Would you like to use cloud-init to customize
the appliance on the first boot (Yes, No)[Yes]?
Would you like to generate on-fly a cloud-init
ISO image (of no-cloud type)
or do you have an existing one (Generate,
Existing)[Generate]?
Please provide the FQDN you would like to use
for the engine appliance.
Note: This will be the FQDN of the engine VM
you are now going to launch,
it should not point to the base host or to any
other existing machine.
Engine VM FQDN: (leave it empty to skip): []:
oVirtEngine.com
Automatically execute engine-setup on the
engine appliance on first boot (Yes, No)[Yes]? No
Please provide the domain name you would like
to use for the engine appliance.
Engine VM domain: [com]
Enter root password that will be used for the
engine appliance (leave it empty to skip):
Confirm appliance root password:
The following CPU types are supported by this
host:
- model_SandyBridge: Intel SandyBridge Family
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
Please specify the CPU type to be used by the
VM [model_SandyBridge]:
Please specify the number of virtual CPUs for
the VM (Defaults to appliance OVF value): [4]: 3
[WARNING] Minimum requirements for disk size not met
You may specify a unicast MAC address for the
VM or accept a randomly generated default
[00:16:3e:2a:82:17]:
Please specify the memory size of the VM in MB
(Defaults to maximum available): [10880]: 8144
How should the engine VM network be configured
(DHCP, Static)[DHCP]? Static
Please enter the IP address to be used for the
engine VM [192.168.122.2]: 192.168.122.201
[ INFO ] The engine VM will be configured to use
192.168.122.201/24 <http://192.168.122.201/24>
Please provide a comma-separated list (max 3)
of IP addresses of domain name servers for the engine VM
Engine VM DNS (leave it empty to skip)
[192.168.122.1]:
Add lines for the appliance itself and for
this host to /etc/hosts on the engine VM?
Note: ensuring that this host could resolve
the engine VM hostname is still up to you
(Yes, No)[No] Yes
--== HOSTED ENGINE CONFIGURATION ==--
Enter engine admin password:
Confirm engine admin password:
Enter the name which will be used to identify
this host inside the Administrator Portal [hosted_engine_1]:
Please provide the name of the SMTP server
through which we will send notifications [localhost]:
Please provide the TCP port number of the SMTP
server [25]:
Please provide the email address from which
notifications will be sent [root@localhost]:
Please provide a comma-separated list of email
addresses which will get notifications [root@localhost]:
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Bridge interface : eth0
Engine FQDN : oVirtEngine.com
Bridge name : ovirtmgmt
Host address : oVirtNode01
SSH daemon port : 22
Gateway address : 192.168.122.1
Host name for web application :
hosted_engine_1
Storage Domain type : glusterfs
Host ID : 1
Image size GB : 10
Storage connection :
oVirtNode01.com:/engine
Console type : vnc
Memory size MB : 8144
MAC address : 00:16:3e:2a:82:17
Boot type : disk
Number of CPUs : 3
OVF archive (for disk boot) :
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.0-20160928.1.el7.centos.ova
Appliance version :
4.0-20160928.1.el7.centos
CPU Type : model_SandyBridge
Please confirm installation settings (Yes,
No)[Yes]:
[ INFO ] Stage: Transaction setup
...
[ INFO ] Stage: Closing up
The following network ports should be opened:
tcp:5900
tcp:5901
tcp:9090
udp:5900
udp:5901
An example of the required configuration for
iptables can be found at:
/etc/ovirt-hosted-engine/iptables.example
In order to configure firewalld, copy the
files from
/etc/ovirt-hosted-engine/firewalld to
/etc/firewalld/services
and execute the following commands:
firewall-cmd -service hosted-cockpit
firewall-cmd -service hosted-console
[ INFO ] Creating VM
You can now connect to the VM with the
following command:
hosted-engine --console
You can also graphically connect to the VM
from your system with the following command:
remote-viewer vnc://oVirtNode01:5900
Use temporary password "2263CpET" to connect
to vnc console.
Please ensure that your Guest OS is properly
configured to support serial console according to your
distro documentation.
Follow
http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_the_old_way
<http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_the_old_way>
for more info.
If you need to reboot the VM you will need to
start it manually using the command:
hosted-engine --vm-start
You can then set a temporary password using
the command:
hosted-engine --add-console-password
Please install and setup the engine in the VM.
You may also be interested in installing
ovirt-guest-agent-common package in the VM.
The VM has been rebooted.
To continue please install oVirt-Engine in the VM
(Follow http://www.ovirt.org/Quick_Start_Guide
<http://www.ovirt.org/Quick_Start_Guide> for more info).
Make a selection from the options below:
(1) Continue setup - oVirt-Engine installation
is ready and ovirt-engine service is up
(2) Abort setup
(3) Power off and restart the VM
(4) Destroy VM and abort setup
(1, 2, 3, 4)[1]:
## Session 2
[nolden@oVirtNode01 ~]$ sudo hosted-engine --console
/usr/share/vdsm/vdsClient.py:33: DeprecationWarning:
vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is
deprecated, please use vdsm.jsonrpcvdscli
from vdsm import utils, vdscli, constants
The engine VM is running on this host
Verbunden mit der Domain: HostedEngine
Escape-Zeichen ist ^]
Fehler: Interner Fehler: Charakter-Einheit console0
verwendet nicht ein PTY
[nolden@oVirtNode01 ~]$ ssh [email protected]
<mailto:[email protected]>
ssh: connect to host ovirtengine.com
<http://ovirtengine.com> port 22: No route to host
## Back to session 1
...
(1, 2, 3, 4)[1]: 1
Checking for oVirt-Engine status at
oVirtEngine.com...
[ INFO ] Engine is still unreachable
oVirt-Engine health status page is not yet
reachable.
The VM has been rebooted.
To continue please install oVirt-Engine in the VM
(Follow http://www.ovirt.org/Quick_Start_Guide
<http://www.ovirt.org/Quick_Start_Guide> for more info).
Make a selection from the options below:
(1) Continue setup - oVirt-Engine installation
is ready and ovirt-engine service is up
(2) Abort setup
(3) Power off and restart the VM
(4) Destroy VM and abort setup
(1, 2, 3, 4)[1]: 2
[ ERROR ] Failed to execute stage 'Closing up': Setup
aborted by user
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104130223.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system
is not reliable, please check the issue,fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
