Hi Moti, Thanks for your reply. Let me check it with this solution.
-- Regards Shanil On Sun, Aug 31, 2014 at 2:15 PM, Moti Asayag <[email protected]> wrote: > > > ----- Original Message ----- > > From: "Shanil S" <[email protected]> > > To: [email protected] > > Sent: Thursday, August 28, 2014 11:31:30 AM > > Subject: [ovirt-users] Unable to assign profile to the nic > > > > Hi All, > > > > I am unable to assign the profile using the ovirt api code, the > following xml > > code is used for creating the nic > > > > <nic> > > <interface>virtio</interface> > > <name>eth0</name> > > <boot_protocol>static</boot_protocol> > > <mac address='".$ip->mac_address."'/> > > <network> > > <ip address='".$ip->mac_ip."' netmask='255.255.255.0' > > gateway='".$ip->mac_gateway."'/> > > </network> > > Try not to provide the 'network' element at all. The vnic profile replaced > the > 'network' element when attaching a nic to a network. > > In this context you should use either <network><name>...</name></network> > or > the <vnic_profile id="..."/>. > > As Juan explained in other thread, any other parameter for network are > being > ignored and network element without name is referred as "empty network". > > > <on_boot>true</on_boot> > > <vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' /> > > </nic> > > > > Could you please check if anything wrong with it ? > > > > > > > > -- > > Regards > > Shanil > > > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.ovirt.org/mailman/listinfo/users > > >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
