----- Original Message ----- > From: "Punit Dambiwal" <[email protected]> > To: "Antoni Segura Puimedon" <[email protected]> > Cc: "Sahina Bose" <[email protected]>, "Dan Kenigsberg" <[email protected]>, > [email protected], [email protected], > "Itamar Heim" <[email protected]>, "Michal Skrivanek" > <[email protected]>, "Sven Kieske" > <[email protected]>, "Frantisek Kobzik" <[email protected]>, > [email protected] > Sent: Wednesday, July 30, 2014 11:35:28 AM > Subject: Re: Network Question > > Hi Antoni, > > Please find the attached screen shots...
>From what I see in the screen shots, The ip rules and routes say that communication to the 43.25.76.0/24 should go via bond0.10 which is for the ovirtmgmt device. That's why it happens. How did you setup the two networks? Are they on the same subnet? > > Thanks, > Punit > > > On Wed, Jul 30, 2014 at 5:19 PM, Antoni Segura Puimedon <[email protected] > > wrote: > > > > > > > ----- Original Message ----- > > > From: "Punit Dambiwal" <[email protected]> > > > To: "Sahina Bose" <[email protected]> > > > Cc: "Dan Kenigsberg" <[email protected]>, [email protected], > > [email protected], "Itamar Heim" <[email protected]>, > > > "Michal Skrivanek" <[email protected]>, "Antoni Segura > > Puimedon" <[email protected]>, "Sven Kieske" > > > <[email protected]>, "Frantisek Kobzik" <[email protected]>, > > [email protected] > > > Sent: Wednesday, July 30, 2014 10:46:47 AM > > > Subject: Re: Network Question > > > > > > Hi All, > > > > > > I am using the storage ip to mount the glusterfs to host...that means the > > > data communication should be run on this network but it's not....it's > > > running on the ovirtmgmt network... > > > > Could you please attach the ip addresses of the gluster nodes, and the > > result of doing: > > > > (on the vdsm host) > > > > ip rule show > > ip route show table (add here each of the tables that show up in the > > previous > > command) > > > > > > > > [image: Inline image 1] > > > > > > > > > > > > On Wed, Jul 30, 2014 at 4:26 PM, Sahina Bose <[email protected]> wrote: > > > > > > > > > > > On 07/30/2014 01:21 PM, Dan Kenigsberg wrote: > > > > > > > >> On Wed, Jul 30, 2014 at 01:04:48PM +0800, Punit Dambiwal wrote: > > > >> > > > >>> Hi, > > > >>> > > > >>> I am facing one strange problem with Ovirt network...i have the below > > > >>> network in my ovirt cluster :- > > > >>> > > > >>> eth0+eth1=bond0 > > > >>> > > > >>> bond0.10= ovirtmgmt (43.250.X.X) > > > >>> bond0.37= VMnetwork > > > >>> > > > >>> eth2+eth3=bond1 (Storage) (10.10.10.X) > > > >>> > > > >>> Glusterfs running on 4 HV's with each have 2 bricks... > > > >>> > > > >>> But still the glusterfs data transfer from ovirtmgmt network instead > > of > > > >>> storage network ?? Is there any more setting required to change it to > > > >>> ovirtmgmt to storage ?? > > > >>> > > > >> The title "Storage" means nothing to oVirt per se. The user needs to > > make > > > >> sure > > > >> that her NFS or iSCSI storage server uses the specific network. > > > >> But unfortunately - and Bala is welcome to correct me if I'm wrong - > > there > > > >> is no means to set the IP address which gluster uses via oVirt. > > > >> > > > >> Can it be done "underneath" oVirt? > > > >> > > > > > > > > For glusterd communication - that is gluster peer to gluster peer - > > > > there's a workaround to achieve this..Please see > > http://lists.ovirt.org/ > > > > pipermail/users/2014-February/021213.html > > > > > > > > For VM to gluster host, the host IP used to mount the volume is the one > > > > used for communication by oVirt. > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
