Dear All, I am installing the latest vz6 kernel on a beefy SuperMicro X10 machine. I followed the usual installation routine, i.e.
-- Install CentOS 6 (latest) -- Follow instructions on page https://wiki.openvz.org/Quick_installation_(legacy) -- Reboot ## Expected result: machine rebooting in OpenVZ 6 kernel ## Actual result: a kernel panic error appears on screen at boot. I am pasting it here: [ 67.817501] Kernel panic - not syncing: Attempted to kill init! [ 67.817581] Pid: 1, comm: init veid: 0 Not tainted 2.6.32-042stabl34.8 #1 [ 67.817660] Call Trace: [ 67.817737] [<ffffffff81564lb0>] ? panic+0xa7/0xl8b [ 67.817816] [<ffffffff8114a470>] ? perf_event_exit_task+0xc0/0x340 [ 67.817897] [<ffffffff8108d56f>] ? do_exit+0x3bf/0x9c0 [ 67.817975] [<ffffffff811c9e35>] ? fput+0x25/0x30 [ 67.818052] [<ffffffff81570302>1 ? system_ca1l_after_swapgs+0xa2/0xl52 [ 67.818132] [<ffffffff8108d5c8>] ? do_group_exit+0x58/0xd0 [ 67.818210] [<ffffffff8108d657>] ? sys_exit_group+0x17/0x20 [ 67.818288] [<ffffffff815703e7>] ? system_ca1l_fastpath+0x35/0x3a [ 67.818367] [<ffffffff8157030e>1 ? system_ca1l_after_swapgs+0xae/0xl52 ## Notes: - Similar errors *seem* to be linked to problems when mounting the root file system; - The CentOS 2.6.32-754.el6.x86_64 kernel boots always successfully; - The main partition is backed by an Areca 1214-4i controller with BBU, configured as HW Raid10; - The kernel module for Areca controllers is present in both initrd images, albeit in different locations: cat /var/log/dracut.log | grep arcmsr Thu Jan 17 14:33:30 CET 2019 Info: Installing ///lib/modules/2.6.32-754.el6.x86_64/extra/arcmsr/arcmsr.ko Thu Jan 17 16:42:07 CET 2019 Info: Installing ///lib/modules/2.6.32-042stab134.8/kernel/drivers/scsi/arcmsr/arcmsr.ko ~~~~ Has anyone encountered such an issue before? Thanks, Corrado Fiore _______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
