I have a HN with a presence on a series of networks: vlan2, vlan3, vlan4, etc.
The HN only has an IP address allocated to one of the interfaces, a management network. Is it possible to assign IP addresses to CT on a network where the HN does not have an IP address? Example: HN: vmbr10 10.0.10.0/24, gw 10.0.10.1: no ip assigned, server vlan vmbr20 10.0.20.0/24, gw 10.0.20.1: ip assigned, 10.0.20.100, management network vmbr30 10.0.30.0/24, gw 10.0.30.1: no ip assigned, dmz CT1: venet0 with IP in dmz, 10.0.30.10 CT2: venet0 with IP in server, 10.0.10.45 Everything works if I assign an IP to the CT on the network where the HN has an IP address. I tried to setup source based routing on the HN for the interfaces where the HN does not have an IP address, but I get an error: # ip rule add from 10.0.30.0/24 lookup dmz # ip route add throw 10.0.30.0/24 table dmz # ip route add default via 10.0.30.1 dev vmbr30 table dmz RTNETLINK answers: Network is unreachable Not sure if this is possible, looking for insight. Thanks, Axton
_______________________________________________ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
