Great, that works !
maybe it could be a good idea to add that in
https://docs.openvz.org/openvz_users_guide.webhelp/_configuring_network_settings.html
thanks .
Le 13/09/2016 22:20, zys...@zystem.pp.ua a écrit :
Use
prlctl set VMName --gw 10.1.0.1
OR
See https://kb.plesk.com/en/126614 to prevent IP configuration in guest OS from
hypervisor level
via command line
--configure <yes|no> option for prlctl set [--device-set|--divice-add] net
designates if IP settings given in the config will be applied on every start of the
virtual machine
The following list of options will not be automatically passed to the guest OS
if --configure no is configured:
ipadd: the IP address to be assigned to the network adapter in the virtual
machine.
dhcp: specifies whether the virtual network adapter should get its IP settings
through a DHCP server.
dhcp6: specifies whether the virtual network adapter should get its IPv6
settings through a DHCP server.
gw: the default gateway to be used by the virtual machine.
gw6: the default IPv6 gateway to be used by the virtual machine.
nameserver: the default DNS server to be used by the virtual machine.
searchdomain: the default search domain to be used by the virtual machine.
For example, to add the network interface with IP settings synchronization
disabled:
prlctl set VMName --device-add net --network Bridged --ipadd 10.0.1.3 --gw
10.1.0.1 --configure no
Note: By default, configuring any of the settings above automatically sets --configure
option to "yes".
12.09.2016, 16:56, "Jehan Procaccia" <jehan.procac...@tem-tsp.eu>:
Hello,
I created a centos7 VM on an openvz 7 host :
# cat /etc/redhat-release
Virtuozzo Linux release 7.2
inside the VM I did set a default gateway
# cat /etc/sysconfig/network
GATEWAY=192.168.5.1
(set it also in /etc/sysconfig/network-scripts/ifcg-eth0)
But after the VM boots, there is no default route at startup :-(
bash-4.2# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.5.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0
virbr0
if I set it manually it does work
bash-4.2# route add default gw 192.168.5.1
bash-4.2# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
0.0.0.0 192.168.5.1 0.0.0.0 UG 0 0 0 eth0
...
what could be wrong ?
Regards .
_______________________________________________
Users mailing list
Users@openvz.org
https://lists.openvz.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@openvz.org
https://lists.openvz.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@openvz.org
https://lists.openvz.org/mailman/listinfo/users
