1. First, I create a vm on computer14, i saw network interfaces below:
[oneadmin@computer14 ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
inet addr:10.72.24.216 Bcast:10.72.24.255 Mask:255.255.255.0
inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:21587155 errors:0 dropped:0 overruns:0 frame:0
TX packets:8407735 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22927887802 (21.3 GiB) TX bytes:667899749 (636.9 MiB)
Memory:fbe60000-fbe80000
eth0.100 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:16672 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:784568 (766.1 KiB)
onebr100 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
inet6 addr: fe80::acb0:e4ff:fe95:6f08/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13746 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:398936 (389.5 KiB) TX bytes:468 (468.0 b)
vnet0 Link encap:Ethernet HWaddr FE:00:DD:67:22:02
inet6 addr: fe80::fc00:ddff:fe67:2202/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:732 (732.0 b)
2. Then, i reboot computer14
[oneadmin@computer14 ~]$ sudo shutdown -r now
3. After this operation，i saw vconfig network interface has gone （eth0.100,
onebr100）
[oneadmin@computer14 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr E8:39:35:18:A1:60
inet addr:10.72.24.216 Bcast:10.72.24.255 Mask:255.255.255.0
inet6 addr: fe80::ea39:35ff:fe18:a160/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:122 errors:0 dropped:0 overruns:0 frame:0
TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13317 (13.0 KiB) TX bytes:12829 (12.5 KiB)
Memory:fbe60000-fbe80000
4. When I create that vm, error occurred below:
[root@computer14 images]# pwd
/one_images/25/images
[root@computer14 images]# ls
deployment.0 disk.0 disk.1
[root@computer14 images]# virsh create deployment.0
error: Failed to create domain from deployment.0
error: Failed to add tap interface to bridge 'onebr100': No such device
于长江 | 东软
From: Andreas Calvo Gómez
Date: 2012-11-30 20:33
To: yu...@neusoft.com
CC: users@lists.opennebula.org
Subject: Re: help: with 8021q driver, network configuration won't work, after
host reboot (???)
We've been using 802.1Q under CentOS 6 without problems for quite a long
time.
Can you post a detailed description of what is happening?
Thanks
On 30/11/12 07:57, users-requ...@lists.opennebula.org wrote:
>
> Message: 2
> Date: Fri, 30 Nov 2012 14:56:47 +0800
> From: ??? <yu...@neusoft.com>
> To: users <users@lists.opennebula.org>
> Subject: [one-users] help: with 8021q driver, network configuration
> won't work after host reboot
> Message-ID: <201211301456470519...@neusoft.com>
> Content-Type: text/plain; charset="gb2312"
>
> As i said, with 8021q driver, network configuration won't work after host
> reboot. Does One notice this?
>
> Here is my solution for rhel below: (Is this ok?)
> # cat $ONE_LOCATION/var/remotes/vnm/802.1Q/HostManaged.rb
> require 'OpenNebulaNetwork'
> ...
> def create_bridge(bridge)
> OpenNebula.exec_and_log_no_exit("#{COMMANDS[:brctl]} addbr #{bridge}")
> OpenNebula.exec_and_log_no_exit("sudo sh -c 'echo brctl addbr #{bridge}
> >> /etc/rc.d/rc.local'")
> end
> ...
> def create_dev_vlan(dev, vlan)
> OpenNebula.exec_and_log("#{COMMANDS[:vconfig]} add #{dev} #{vlan}")
> OpenNebula.exec_and_log("sudo sh -c 'echo vconfig add #{dev} #{vlan} >>
> /etc/rc.d/rc.local'")
> end
> ...
> def attach_brigde_dev(bridge, dev, vlan=nil)
> dev = "#{dev}.#{vlan}" if vlan
> OpenNebula.exec_and_log("#{COMMANDS[:brctl]} addif #{bridge} #{dev}")
> OpenNebula.exec_and_log("sudo sh -c 'echo brctl addif #{bridge} #{dev}
> >> /etc/rc.d/rc.local'")
> end
> ...
> def ifup(dev, vlan=nil)
> dev = "#{dev}.#{vlan}" if vlan
> OpenNebula.exec_and_log("#{COMMANDS[:ip]} link set #{dev} up")
> OpenNebula.exec_and_log("sudo sh -c 'echo ip link set #{dev} up >>
> /etc/rc.d/rc.local'")
> end
> ...
>
>
>
>
> ??? | ??
> ---------------------------------------------------------------------------------------------------
> Confidentiality Notice: The information contained in this e-mail and any
> accompanying attachment(s)
> is intended only for the use of the intended recipient and may be
> confidential and/or privileged of
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of
> this communication is
> not the intended recipient, unauthorized use, forwarding, printing, storing,
> disclosure or copying
> is strictly prohibited, and may be unlawful.If you have received this
> communication in error,please
> immediately notify the sender by return e-mail, and delete the original
> message and all copies from
> your system. Thank you.
> ---------------------------------------------------------------------------------------------------
>
--
Andreas Calvo Gómez
Systems Engineer
Scytl Secure Electronic Voting
Plaça Gal·la Placidia, 1-3, 1st floor · 08006 Barcelona
Phone: + 34 934 230 324
Fax: + 34 933 251 028
http://www.scytl.com
NOTICE: The information in this e-mail and in any of its attachments is
confidential and intended solely for the attention and use of the named
addressee(s). If you are not the intended recipient, any disclosure,
copying,
distribution or retaining of this message or any part of it, without the
prior
written consent of Scytl Secure Electronic Voting, SA is prohibited and
may be
unlawful. If you have received this in error, please contact the sender
and
delete the material from any computer.
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and any
accompanying attachment(s)
is intended only for the use of the intended recipient and may be confidential
and/or privileged of
Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of
this communication is
not the intended recipient, unauthorized use, forwarding, printing, storing,
disclosure or copying
is strictly prohibited, and may be unlawful.If you have received this
communication in error,please
immediately notify the sender by return e-mail, and delete the original message
and all copies from
your system. Thank you.
---------------------------------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users@lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
