Dear OpenNebula developers We have crated a fixed virtual network some time ago with a specific bridge (virbrA).
Now we did some changes in our network, we are using a new IP rank but for practical reasons we want to still use the same vnetid. We have updated our vnet to change its bridge (by virbrB) but when we instantiate new machines, the IP is assigned correctly but it still uses the old bridge name (virbrA). How we can change the bridge name without create a new vnet? Thanks in advance! Alvaro > Dear OpenNebula developers > > > We are testing new rOCCI version with OpenNebula using x509 auth. > For the first tests we have created several users for different > certificate DNs (included into passwd without spaces). > > #oneuser create testinguser "/DC=xx/DC=xxx/O=xxxx/CN=xxxxx" --driver x509 > > Our tests are working fine but now we have a doubt. > > It's also possible to map different DNs to a single user? As example we > want to use the same testing user for > > /DC=xx/DC=xxx/O=xxxx/CN=xxxxx > > but also for: > > /DC=yyyy/DC=yyyy/O=yyyy/CN=yyyyy > > x509 certificates, is this possible? > > Thanks in advance! > Alvaro > _______________________________________________ > Users mailing list > Users@lists.opennebula.org > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > _______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
