Hello All/Davood I have set iup the contextualization parameters and my vm template loks like: CONTEXT=[ FILES="~/vm_context/init.sh ~/vm_context/id_rsa.pub", HOSTNAME="cloud", PUBLIC_IP="10.112.10.35", TARGET="hdb", USERNAME="oneadmin" ]
Contextualization is used to pass parameters to open vm and make it customised. But still not nable to ssh into the vm .Not sure what exact is the problem ? May be some problem with bridge . Any more ideas? Thanks and Regards Ankit Anand On 6/8/12, davood ghatreh <davood.gh2...@gmail.com> wrote: > Dear Ankit, > > I couldn't find any contextualization parameter in your VM template. You > need to define it if you want Opennebula to set the TCP/IP configuration > (and other OS parameters such as hostname etc) automatically in the VM. > Here is the related document: > > http://opennebula.org/documentation:rel3.4:cong > > you can also connect to your VM using VNC, if you want to set the IP > address manually. > > > Thanks > Davood > > On Fri, Jun 8, 2012 at 9:18 AM, ankit anand <ankit.s.an...@gmail.com> > wrote: > >> Hello All >> >> I have set up a vritual machine wchich is in running state . >> >> but I am not able to ping to Virtual address of that VM . I mean Virtual >> address by one of Vnet address specified in vnet file . >> I have set up my bridge br0 through open suse yast interface . >> >> Details of ifconfig are: >> >> br0 Link encap:Ethernet HWaddr AE:94:4C:63:C9:29 >> inet addr:10.112.10.35 Bcast:10.112.10.255 Mask:255.255.255.0 >> inet6 addr: fe80::ac94:4cff:fe63:c929/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:33 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:0 (0.0 b) TX bytes:5595 (5.4 Kb) >> >> eth0 Link encap:Ethernet HWaddr 00:E0:81:C1:A6:2C >> inet addr:10.112.10.35 Bcast:10.112.10.255 Mask:255.255.255.0 >> inet6 addr: fe80::2e0:81ff:fec1:a62c/64 Scope:Link >> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 >> RX packets:418080 errors:0 dropped:9 overruns:0 frame:0 >> TX packets:125349 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:148955613 (142.0 Mb) TX bytes:32412539 (30.9 Mb) >> Interrupt:44 >> >> eth1 Link encap:Ethernet HWaddr 00:E0:81:C1:A6:2D >> UP BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) >> Interrupt:45 Base address:0x2000 >> >> lo Link encap:Local Loopback >> inet addr:127.0.0.1 Mask:255.0.0.0 >> inet6 addr: ::1/128 Scope:Host >> UP LOOPBACK RUNNING MTU:16436 Metric:1 >> RX packets:381969 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:381969 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:54727247 (52.1 Mb) TX bytes:54727247 (52.1 Mb) >> >> >> vm DETAILS: >> >> VIRTUAL MACHINE 58 >> INFORMATION >> ID : 58 >> NAME : one-58 >> USER : oneadmin >> GROUP : oneadmin >> STATE : ACTIVE >> LCM_STATE : RUNNING >> HOSTNAME : cloud >> START TIME : 06/08 10:16:14 >> END TIME : - >> DEPLOY ID : one-58 >> >> VIRTUAL MACHINE >> MONITORING >> NET_RX : 0 >> NET_TX : 0 >> USED CPU : 0 >> USED MEMORY : 0 >> >> PERMISSIONS >> >> OWNER : um- >> GROUP : --- >> OTHER : --- >> >> VIRTUAL MACHINE >> TEMPLATE >> CONTEXT=[ >> TARGET="hdb" ] >> CPU="1" >> DISK=[ >> BUS="ide", >> CLONE="YES", >> DATASTORE="default", >> DATASTORE_ID="1", >> DISK_ID="0", >> IMAGE="OpenSuse2", >> IMAGE_ID="9", >> IMAGE_UNAME="oneadmin", >> READONLY="NO", >> SAVE="NO", >> >> SOURCE="/srv/cloud/one/var/datastores/1/11a9b1e6031e2206511466892f0e960e", >> TARGET="hda", >> TM_MAD="shared", >> TYPE="DISK" ] >> GRAPHICS=[ >> LISTEN="10.112.10.35", >> PASSWD="cadlab", >> PORT="5903", >> TYPE="vnc" ] >> MEMORY="1024" >> NAME="one-58" >> NIC=[ >> BRIDGE="br0", >> IP="10.112.10.37", >> MAC="02:00:0a:70:0a:25", >> NETWORK="Public", >> NETWORK_ID="6", >> NETWORK_UNAME="oneadmin", >> VLAN="NO" ] >> OS=[ >> ARCH="x86_64", >> BOOT="hd" ] >> RAW=[ >> TYPE="kvm" ] >> TEMPLATE_ID="0" >> VCPU="1" >> VMID="58" >> >> VIRTUAL MACHINE >> HISTORY >> SEQ HOSTNAME REASON START TIME PTIME >> 0 cloud none 06/08 10:16:33 0d 00:01 0d 00:00 >> >> VNET FILE DETAILS: >> VIRTUAL NETWORK 6 >> INFORMATION >> ID : 6 >> NAME : Public >> USER : oneadmin >> GROUP : oneadmin >> CLUSTER : - >> TYPE : FIXED >> BRIDGE : br0 >> VLAN : No >> PHYSICAL DEVICE: >> VLAN ID : >> USED LEASES : 1 >> >> PERMISSIONS >> >> OWNER : um- >> GROUP : --- >> OTHER : --- >> >> VIRTUAL NETWORK >> TEMPLATE >> DNS="10.16.25.13" >> GATEWAY="10.112.10.1" >> >> USED >> LEASES >> LEASE=[ IP="10.112.10.37", MAC="02:00:0a:70:0a:25", USED="1", VID="58" ] >> >> FREE >> LEASES >> LEASE=[ IP="10.112.10.38", MAC="02:00:0a:70:0a:26", USED="0", VID="-1" ] >> LEASE=[ IP="10.112.10.39", MAC="02:00:0a:70:0a:27", USED="0", VID="-1" ] >> LEASE=[ IP="10.112.10.40", MAC="02:00:0a:70:0a:28", USED="0", VID="-1" ] >> >> when i do >> ssh 10.112.10.37 >> it returns : >> ssh: connect to host 10.112.10.37 port 22: No route to host >> >> Any clues ? >> >> Thanks and regards >> Ankit Anand >> >> >> >> >> The details of vnet file : >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opennebula.org >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >> >> > _______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
