Hi, If your VM is not moving from pending, you should check that the scheduler is running. Look for the mm_sched process, and take a look at /var/log/one/sched.log. Or maybe you just ran out of CPU or MEMORY capacity in your hosts.
Regards. -- Carlos Martín, MSc Project Engineer OpenNebula - The Open-source Solution for Data Center Virtualization www.OpenNebula.org | cmar...@opennebula.org | @OpenNebula<http://twitter.com/opennebula><cmar...@opennebula.org> On Wed, Apr 25, 2012 at 4:48 PM, Teik Hooi Beh <th...@thbeh.com> wrote: > Hi, > > I did try as mentioned in > http://opennebula.org/documentation:rel3.4:kvmg#kvm_configuration but VM > is going into never ending pending state and no logs were reported. > > I will redeploy again. Has anyone published an installation guidelines on > Ubuntu 11.10 other than from http://cloudblab.wordpress.com/ > > Regards > Beh > > > > On Wed, Apr 25, 2012 at 3:59 PM, Michael Kutzner < > michael.kutz...@virtion.net> wrote: > >> Hi, >> >> did you check qemu conf as described here: >> http://opennebula.org/documentation:rel3.4:kvmg#kvm_configuration >> (had a similar error at the beginning ... ) >> >> >> Best, Michael >> >> Am 25.04.2012 um 02:02 schrieb Teik Hooi Beh: >> >> Hi, >> >> I manage to solve the previous issue by changing "dynamic_ownership = 0". >> But now I have a new error which is also due to permission denied error:- >> >> Wed Apr 25 00:05:11 2012 [DiM][I]: New VM state is ACTIVE. >> Wed Apr 25 00:05:11 2012 [LCM][I]: New VM state is PROLOG. >> Wed Apr 25 00:05:17 2012 [TM][I]: clone: Cloning >> ../../1/cfb778816ca91644bf82a8222a38f5ae in >> node01:/srv/cloud/one/var//datastores/0/51/dis >> k.0 >> Wed Apr 25 00:05:17 2012 [TM][I]: ExitCode: 0 >> Wed Apr 25 00:05:18 2012 [TM][I]: context: Generating context block >> device at node01:/srv/cloud/one/var//datastores/0/51/disk.1 >> Wed Apr 25 00:05:18 2012 [TM][I]: ExitCode: 0 >> Wed Apr 25 00:05:18 2012 [LCM][I]: New VM state is BOOT >> Wed Apr 25 00:05:18 2012 [VMM][I]: Generating deployment file: >> /srv/cloud/one/var/51/deployment.0 >> Wed Apr 25 00:05:24 2012 [VMM][I]: ExitCode: 0 >> Wed Apr 25 00:05:24 2012 [VMM][I]: Successfully execute network driver >> operation: pre. >> Wed Apr 25 00:05:55 2012 [VMM][I]: Command execution fail: cat << EOT | >> /var/tmp/one/vmm/kvm/deploy /srv/cloud/one/var//datastores/0/51/dep >> loyment.0 node01 51 node01 >> Wed Apr 25 00:05:55 2012 [VMM][I]: error: Failed to create domain from >> /srv/cloud/one/var//datastores/0/51/deployment.0 >> Wed Apr 25 00:05:55 2012 [VMM][I]: error: internal error process exited >> while connecting to monitor: kvm: -drive file=/srv/cloud/one/var//d >> atastores/0/51/disk.0,if=none,id=drive-ide0-0-0,format=raw: could not >> open disk image /srv/cloud/one/var//datastores/0/51/disk.0: Permissio >> n denied >> Wed Apr 25 00:05:55 2012 [VMM][I]: >> Wed Apr 25 00:05:55 2012 [VMM][E]: Could not create domain from >> /srv/cloud/one/var//datastores/0/51/deployment.0 >> Wed Apr 25 00:05:55 2012 [VMM][I]: ExitCode: 255 >> Wed Apr 25 00:05:55 2012 [VMM][I]: Failed to execute virtualization >> driver operation: deploy. >> Wed Apr 25 00:05:55 2012 [VMM][E]: Error deploying virtual machine: Could >> not create domain from /srv/cloud/one/var//datastores/0/51/deploy >> ment.0 >> Wed Apr 25 00:05:55 2012 [DiM][I]: New VM state is FAILED >> >> I know it is something to relating to libvirt or qemu but just couldn't >> pin point the fault. >> >> Regards >> Beh >> >> >> 2012/4/24 Carlos Martín Sánchez <cmar...@opennebula.org> >> >>> Hi, >>> >>> Are you using the shared TM driver [1] in your system datastore? If so, >>> please check that the datastore directory is properly exported, and that >>> files created in the front-end have the correct permissions so the oneadmin >>> account in the host can see them. >>> >>> Regards >>> >>> [1] http://opennebula.org/documentation:rel3.4:system_ds >>> -- >>> Carlos Martín, MSc >>> Project Engineer >>> OpenNebula - The Open-source Solution for Data Center Virtualization >>> www.OpenNebula.org | cmar...@opennebula.org | >>> @OpenNebula<http://twitter.com/opennebula><cmar...@opennebula.org> >>> >>> >>> >>> On Sun, Apr 22, 2012 at 6:43 AM, Teik Hooi Beh <th...@thbeh.com> wrote: >>> >>>> Hi, >>>> >>>> I have just started with opennebula and have manage to setup a test lab >>>> with 2 servers (following the guide from >>>> http://cloudblab.wordpress.com/) minus the window image deployment. I >>>> have tried to test with ttylinux using instruction VM sample with Context >>>> & Network 3.4 from open nebula web site. >>>> >>>> Image was properly registered with rdy state but when I tried to deploy >>>> the VM i got the following message: >>>> >>>> >>>> Sun Apr 22 12:32:52 2012 [DiM][I]: New VM state is ACTIVE. >>>> Sun Apr 22 12:32:52 2012 [LCM][I]: New VM state is PROLOG. >>>> Sun Apr 22 12:32:53 2012 [TM][I]: clone: Cloning >>>> ../../1/cfb778816ca91644bf82a8222a38f5ae in >>>> node01:/srv/cloud/one/var//datastores/0/26/disk.0 >>>> Sun Apr 22 12:32:53 2012 [TM][I]: ExitCode: 0 >>>> Sun Apr 22 12:32:54 2012 [TM][I]: context: Generating context block device >>>> at node01:/srv/cloud/one/var//datastores/0/26/disk.1 >>>> Sun Apr 22 12:32:54 2012 [TM][I]: ExitCode: 0 >>>> Sun Apr 22 12:32:54 2012 [LCM][I]: New VM state is BOOT >>>> Sun Apr 22 12:32:54 2012 [VMM][I]: Generating deployment file: >>>> /srv/cloud/one/var/26/deployment.0 >>>> Sun Apr 22 12:32:54 2012 [VMM][I]: ExitCode: 0 >>>> Sun Apr 22 12:32:54 2012 [VMM][I]: Successfully execute network driver >>>> operation: pre. >>>> Sun Apr 22 12:32:56 2012 [VMM][I]: Command execution fail: cat << EOT | >>>> /var/tmp/one/vmm/kvm/deploy >>>> /srv/cloud/one/var//datastores/0/26/deployment.0 node01 26 node01 >>>> Sun Apr 22 12:32:56 2012 [VMM][I]: error: Failed to create domain from >>>> /srv/cloud/one/var//datastores/0/26/deployment.0 >>>> Sun Apr 22 12:32:56 2012 [VMM][I]: error: unable to open disk path >>>> /srv/cloud/one/var//datastores/0/26/disk.0: Permission deniedSun Apr 22 >>>> 12:32:56 2012 [VMM][E]: Could not create domain from >>>> /srv/cloud/one/var//datastores/0/26/deployment.0 >>>> Sun Apr 22 12:32:56 2012 [VMM][I]: ExitCode: 255 >>>> Sun Apr 22 12:32:56 2012 [VMM][I]: Failed to execute virtualization driver >>>> operation: deploy.Sun Apr 22 12:32:56 2012 [VMM][E]: Error deploying >>>> virtual machine: Could not create domain from >>>> /srv/cloud/one/var//datastores/0/26/deployment.0 >>>> Sun Apr 22 12:32:56 2012 [DiM][I]: New VM state is FAILED >>>> >>>> As I am new, i am not sure where to start debugging to find out what is >>>> wrong. Any advice? >>>> >>>> Thanks >>>> Beh >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@lists.opennebula.org >>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>>> >>>> >>> >> _______________________________________________ >> Users mailing list >> Users@lists.opennebula.org >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >> >> >> >> >> >> >> >> > > _______________________________________________ > Users mailing list > Users@lists.opennebula.org > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > >
_______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org