Hi Jeff, I think you're onto something with the multiple copies.
For this reason, I also tried to run: ``` /usr/local/openmpi-5.0.3/bin/mpirun --version ``` To make sure I'm running the correct copy, but this one crashes with the same error. As a next step, I can try to install OpenMPI on a different system to narrow down the problem. Or run it in a Docker container. And thanks for the pointer on the `mpirun hello_c.c`. This command made no sense. Best, Terence On Sat, 4 May 2024, 14:30 Jeff Squyres (jsquyres), <jsquy...@cisco.com> wrote: > My apologies – I must have somehow been looking at the wrong config.log > file. > > I see there's an extra - in the script on the help page; I'll get that > fixed. > > Thanks for the tarball; that's easier to get everything. Looking in > there, it looks like you built with a prefix of /usr/local/openmpi-5.0.3, > but your original email referred to looking for a help file in > /usr/share/openmpi/help-mpirun.txt -- this seems to be a disparity. > > You might want to check that you don't have multiple copies of Open MPI > installed, and you're not running an unexpected copy somewhere – not the > one you just built. > > Also, your first mail mentioned "mpirun hello_c.c" – you don't want to do > that. mpirun is used for launching applications. hello_c.c is the source > code – you need to compile it first. In the examples directory, you can > make, or you can manually build it via mpicc hello_c.c -o hello_c. > > ------------------------------ > *From:* T Brouns <t.s.n.bro...@gmail.com> > *Sent:* Saturday, May 4, 2024 2:00 AM > *To:* Jeff Squyres (jsquyres) <jsquy...@cisco.com> > *Subject:* Re: [OMPI users] Fwd: Unable to run basic mpirun command > (OpenMPI v5.0.3) > > Hi Jeff, > > Thanks for the response. > > > *"Your config.log file shows that you are trying to build Open MPI 2.1.6 > and that configure failed."* > > > Where are you seeing version 2.1.6 exactly? Version 5.0.3 is mentioned > many times in the config.log file. Whereas if I do a recursive search for > "2.1.6", it doesn't come up in any of the log files. > > Also, the configure didn't give any error message. It > successfully completed with: configure: exit 0 > > And I never installed version 2.1.6. > > Are you sure you are looking at the right file? > > > *"Can you provide all the information from > https://docs.open-mpi.org/en/v5.0.x/getting-help.html > <https://docs.open-mpi.org/en/v5.0.x/getting-help.html>? (e.g., tar all > the files up in a single file – makes it easier to download and examine > everything)"* > > > Here's the TAR file: > > > https://drive.google.com/file/d/19cr7Y4gyCEP0Aa2isTnASItOe9wmfTSK/view?usp=sharing > > When I used the first script provided on that webpage, I got the following > error: > > ``` > + tar -x -C /home/jupyter/openmpi-5.0.3/ompi-output - > ++ find . -name config.log > + tar -cf ./3rd-party/libevent-2.1.12-stable/config.log > ./3rd-party/openpmix/config.log ./3rd-party/romio341/mpl/config.log > ./3rd-party/romio341/config.log ./3rd-party/prrte/config.log ./config.log > tar: This does not look like a tar archive > tar: -: Not found in archive > tar: Exiting with failure status due to previous errors > ``` > > This is why I didn't generate the TAR file in the first place. I fixed the > script now. > > > Best, > Terence > > > > On Fri, 3 May 2024 at 23:43, Jeff Squyres (jsquyres) <jsquy...@cisco.com> > wrote: > > Your config.log file shows that you are trying to build Open MPI 2.1.6 and > that configure failed. > > I'm not sure how to square this with the information that you provided in > your message... did you upload the wrong config.log? > > Can you provide all the information from > https://docs.open-mpi.org/en/v5.0.x/getting-help.html? (e.g., tar all > the files up in a single file – makes it easier to download and examine > everything) > ------------------------------ > *From:* users <users-boun...@lists.open-mpi.org> on behalf of T Brouns > via users <users@lists.open-mpi.org> > *Sent:* Friday, May 3, 2024 4:04 PM > *To:* users@lists.open-mpi.org <users@lists.open-mpi.org> > *Cc:* T Brouns <t.s.n.bro...@gmail.com> > *Subject:* [OMPI users] Fwd: Unable to run basic mpirun command (OpenMPI > v5.0.3) > > > Hello, > > I'm experiencing issues running simple `mpirun` commands, after installing > OpenMPI v5.0.3. > > When I run any command with `mpirun`, for example: > > ``` > mpirun --help > mpirun --version > mpirun uptime > mpirun hello_c.c > ``` > > I end up with the following error (in every case): > > ``` > -------------------------------------------------------------------------- > Sorry! You were supposed to get help about: > prterun-exec-failed > from the file: > /usr/share/openmpi/help-mpirun.txt: No such file or directory > But I couldn't find that topic in the file. Sorry! > -------------------------------------------------------------------------- > ``` > > I've installed OpenMPI using these steps: > https://docs.open-mpi.org/en/v5.0.x/installing-open-mpi/quickstart.html > > When I install an older version of OpenMPI (such as v4.0.5), I end up with > the following error instead, when running `mpirun`: > > ``` > -------------------------------------------------------------------------- > It looks like opal_init failed for some reason; your parallel process is > likely to abort. There are many reasons that a parallel process can > fail during opal_init; some of which are due to configuration or > environment problems. This failure appears to be an internal failure; > here's some additional information (which may only be relevant to an > Open MPI developer): > > opal_shmem_base_select failed > --> Returned value -1 instead of OPAL_SUCCESS > -------------------------------------------------------------------------- > ``` > > You can find all the log files over here: > > https://drive.google.com/drive/folders/163N5Xx5UJZ7fKU172VZSGF2nPY6z0tJF?usp=sharing > > > Love to get some help on this. Thanks. > > Best, > Terence > >
