Hi Thanks for all these informations !
But i have to confess that in this multi-tuning-parameter space, i got somehow lost. Furthermore it is somtimes mixing between user-space and kernel-space. I have only possibility to act on the user space. 1) So i have on the system max locked memory: - ulimit -l unlimited (default ) and i do not see any warnings/errors related to that when launching MPI. 2) I tried differents algorithms for MPI_all_reduce op. all showing drop in bw for size=16384 4) I disable openIB ( no RDMA, ) and used only TCP, and i noticed the same behaviour. 3) i realized that increasing the so-called warm up parameter in the OSU benchmark (argument -x 200 as default) the discrepancy. At the contrary putting lower threshold ( -x 10 ) can increase this BW discrepancy up to factor 300 at message size 16384 compare to message size 8192 for example. So does it means that there are some caching effects in the internode communication? From my experience, to tune parameters is a time-consuming and cumbersome task. Could it also be the problem is not really on the openMPI implemenation but on the system? Best Denis ________________________________ From: users <users-boun...@lists.open-mpi.org> on behalf of Gus Correa via users <users@lists.open-mpi.org> Sent: Monday, February 7, 2022 9:14:19 PM To: Open MPI Users Cc: Gus Correa Subject: Re: [OMPI users] Using OSU benchmarks for checking Infiniband network This may have changed since, but these used to be relevant points. Overall, the Open MPI FAQ have lots of good suggestions: https://www.open-mpi.org/faq/ some specific for performance tuning: https://www.open-mpi.org/faq/?category=tuning https://www.open-mpi.org/faq/?category=openfabrics 1) Make sure you are not using the Ethernet TCP/IP, which is widely available in compute nodes: mpirun --mca btl self,sm,openib ... https://www.open-mpi.org/faq/?category=tuning#selecting-components However, this may have changed lately: https://www.open-mpi.org/faq/?category=tcp#tcp-auto-disable 2) Maximum locked memory used by IB and their system limit. Start here: https://www.open-mpi.org/faq/?category=openfabrics#limiting-registered-memory-usage 3) The eager vs. rendezvous message size threshold. I wonder if it may sit right where you see the latency spike. https://www.open-mpi.org/faq/?category=all#ib-locked-pages-user 4) Processor and memory locality/affinity and binding (please check the current options and syntax) https://www.open-mpi.org/faq/?category=tuning#using-paffinity-v1.4 On Mon, Feb 7, 2022 at 11:01 AM Benson Muite via users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> wrote: Following https://www.open-mpi.org/doc/v3.1/man1/mpirun.1.php mpirun --verbose --display-map Have you tried newer OpenMPI versions? Do you get similar behavior for the osu_reduce and osu_gather benchmarks? Typically internal buffer sizes as well as your hardware will affect performance. Can you give specifications similar to what is available at: http://mvapich.cse.ohio-state.edu/performance/collectives/ where the operating system, switch, node type and memory are indicated. If you need good performance, may want to also specify the algorithm used. You can find some of the parameters you can tune using: ompi_info --all A particular helpful parameter is: MCA coll tuned: parameter "coll_tuned_allreduce_algorithm" (current value: "ignore", data source: default, level: 5 tuner/detail, type: int) Which allreduce algorithm is used. Can be locked down to any of: 0 ignore, 1 basic linear, 2 nonoverlapping (tuned reduce + tuned bcast), 3 recursive doubling, 4 ring, 5 segmented ring Valid values: 0:"ignore", 1:"basic_linear", 2:"nonoverlapping", 3:"recursive_doubling", 4:"ring", 5:"segmented_ring", 6:"rabenseifner" MCA coll tuned: parameter "coll_tuned_allreduce_algorithm_segmentsize" (current value: "0", data source: default, level: 5 tuner/detail, type: int) For OpenMPI 4.0, there is a tuning program [2] that might also be helpful. [1] https://stackoverflow.com/questions/36635061/how-to-check-which-mca-parameters-are-used-in-openmpi [2] https://github.com/open-mpi/ompi-collectives-tuning On 2/7/22 4:49 PM, Bertini, Denis Dr. wrote: > Hi > > When i repeat i always got the huge discrepancy at the > > message size of 16384. > > May be there is a way to run mpi in verbose mode in order > > to further investigate this behaviour? > > Best > > Denis > > ------------------------------------------------------------------------ > *From:* users > <users-boun...@lists.open-mpi.org<mailto:users-boun...@lists.open-mpi.org>> > on behalf of Benson > Muite via users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> > *Sent:* Monday, February 7, 2022 2:27:34 PM > *To:* users@lists.open-mpi.org<mailto:users@lists.open-mpi.org> > *Cc:* Benson Muite > *Subject:* Re: [OMPI users] Using OSU benchmarks for checking Infiniband > network > Hi, > Do you get similar results when you repeat the test? Another job could > have interfered with your run. > Benson > On 2/7/22 3:56 PM, Bertini, Denis Dr. via users wrote: >> Hi >> >> I am using OSU microbenchmarks compiled with openMPI 3.1.6 in order to >> check/benchmark >> >> the infiniband network for our cluster. >> >> For that i use the collective all_reduce benchmark and run over 200 >> nodes, using 1 process per node. >> >> And this is the results i obtained 😎 >> >> >> >> ################################################################ >> >> # OSU MPI Allreduce Latency Test v5.7.1 >> # Size Avg Latency(us) Min Latency(us) Max Latency(us) Iterations >> 4 114.65 83.22 147.98 1000 >> 8 133.85 106.47 164.93 1000 >> 16 116.41 87.57 150.58 1000 >> 32 112.17 93.25 130.23 1000 >> 64 106.85 81.93 134.74 1000 >> 128 117.53 87.50 152.27 1000 >> 256 143.08 115.63 173.97 1000 >> 512 130.34 100.20 167.56 1000 >> 1024 155.67 111.29 188.20 1000 >> 2048 151.82 116.03 198.19 1000 >> 4096 159.11 122.09 199.24 1000 >> 8192 176.74 143.54 221.98 1000 >> 16384 48862.85 39270.21 54970.96 1000 >> 32768 2737.37 2614.60 2802.68 1000 >> 65536 2723.15 2585.62 2813.65 1000 >> >> #################################################################### >> >> Could someone explain me what is happening for message = 16384 ? >> One can notice a huge latency (~ 300 time larger) compare to message >> size = 8192. >> I do not really understand what could create such an increase in the >> latency. >> The reason i use the OSU microbenchmarks is that we >> sporadically experience a drop >> in the bandwith for typical collective operations such as MPI_Reduce in >> our cluster >> which is difficult to understand. >> I would be grateful if somebody can share its expertise or such problem >> with me. >> >> Best, >> Denis >> >> >> >> --------- >> Denis Bertini >> Abteilung: CIT >> Ort: SB3 2.265a >> >> Tel: +49 6159 71 2240 >> Fax: +49 6159 71 2986 >> E-Mail: d.bert...@gsi.de<mailto:d.bert...@gsi.de> >> >> GSI Helmholtzzentrum für Schwerionenforschung GmbH >> Planckstraße 1, 64291 Darmstadt, Germany, www.gsi.de<http://www.gsi.de> >> >> Commercial Register / Handelsregister: Amtsgericht Darmstadt, HRB 1528 >> Managing Directors / Geschäftsführung: >> Professor Dr. Paolo Giubellino, Dr. Ulrich Breuer, Jörg Blaurock >> Chairman of the GSI Supervisory Board / Vorsitzender des GSI-Aufsichtsrats: >> Ministerialdirigent Dr. Volkmar Dietz >> >