Right. there was a reference counting issue in OMPI that required a change to PSM2 to properly fix. There's a configuration option to disable the reference count check at build time, although I don't recall what the option is off the top of my head.
From: Carlson, Timothy S <timothy.carl...@pnnl.gov> Sent: Wednesday, May 19, 2021 11:31 AM To: Open MPI Users <users@lists.open-mpi.org> Cc: Heinz, Michael William <michael.william.he...@cornelisnetworks.com> Subject: Re: [OMPI users] unable to launch a job on a system with OmniPath Just some more data from my OminPath based cluster. There certainly was a change from 4.0.x to 4.1.x With 4.0.1 I woud build openmpi with ./configure --with-psm2 --with-slurm --with-pmi=/usr And while srun would spit out a warning, the performance was as expected. srun -N 2 --ntasks-per-node=1 -A ops -p short mpi/pt2pt/osu_latency -cut- WARNING: There was an error initializing an OpenFabrics device. Local host: n0005 Local device: hfi1_0 -------------------------------------------------------------------------- # OSU MPI Latency Test v5.5 # Size Latency (us) 0 1.13 1 1.13 2 1.13 4 1.13 8 1.13 16 1.49 32 1.49 64 1.39 -cut- Similarly for bandwidth 32768 6730.96 65536 9801.56 131072 11887.62 262144 11959.18 524288 12062.57 1048576 12038.13 2097152 12048.90 4194304 12112.04 With 4.1.x it appears I need to upgrade my psm2 installation from what I have now # rpm -qa | grep psm2 libpsm2-11.2.89-1.x86_64 libpsm2-devel-11.2.89-1.x86_64 libpsm2-compat-11.2.89-1.x86_64 libfabric-psm2-1.7.1-10.x86_64 because configure spit out this warning WARNING: PSM2 needs to be version 11.2.173 or later. Disabling MTL The above cluster is running IntelOPA 10.9.2 Tim From: users <users-boun...@lists.open-mpi.org<mailto:users-boun...@lists.open-mpi.org>> on behalf of "Heinz, Michael William via users" <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Reply-To: Open MPI Users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Date: Wednesday, May 19, 2021 at 7:57 AM To: Open MPI Users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Cc: "Heinz, Michael William" <michael.william.he...@cornelisnetworks.com<mailto:michael.william.he...@cornelisnetworks.com>> Subject: Re: [OMPI users] unable to launch a job on a system with OmniPath Check twice before you click! This email originated from outside PNNL. After thinking about this for a few more minutes, it occurred to me that you might be able to "fake" the required UUID support by passing it as a shell variable. For example: export OMPI_MCA_orte_precondition_transports="0123456789ABCDEF-0123456789ABCDEF" would probably do it. However, note that the format of the string must be 16 hex digits, a hyphen, then 16 more hex digits. anything else will be rejected. Also, I have never tried doing this, YMMV. From: Heinz, Michael William Sent: Wednesday, May 19, 2021 10:35 AM To: Open MPI Users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Cc: Ralph Castain <r...@open-mpi.org<mailto:r...@open-mpi.org>> Subject: RE: [OMPI users] unable to launch a job on a system with OmniPath So, the bad news is that the PSM2 MTL requires ORTE - ORTE generates a UUID to identify the job across all nodes in the fabric, allowing processes to find each other over OPA at init time. I believe the reason this works when you use OFI/libfabric is that libfabrice generates its own UUIDs. From: users <users-boun...@lists.open-mpi.org<mailto:users-boun...@lists.open-mpi.org>> On Behalf Of Ralph Castain via users Sent: Wednesday, May 19, 2021 10:19 AM To: Open MPI Users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Cc: Ralph Castain <r...@open-mpi.org<mailto:r...@open-mpi.org>> Subject: Re: [OMPI users] unable to launch a job on a system with OmniPath The original configure line is correct ("--without-orte") - just a typo in the later text. You may be running into some issues with Slurm's built-in support for OMPI. Try running it with OMPI's "mpirun" instead and see if you get better performance. You'll have to reconfigure to remove the "--without-orte" and "--with-ompi-pmix-rte" options. I would also recommend removing the "--with-pmix=external --with-libevent=external --with-hwloc=xxx --with-libevent=xxx" entries. In other words, get down to a vanilla installation so we know what we are dealing with - otherwise, it gets very hard to help you. On May 19, 2021, at 7:09 AM, Jorge D'Elia via users <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> wrote: ----- Mensaje original ----- De: "Pavel Mezentsev via users" <users@lists.open-mpi.org<mailto:users@lists.open-mpi.org>> Para: users@lists.open-mpi.org<mailto:users@lists.open-mpi.org> CC: "Pavel Mezentsev" <pavel.mezent...@gmail.com<mailto:pavel.mezent...@gmail.com>> Enviado: Miércoles, 19 de Mayo 2021 10:53:50 Asunto: Re: [OMPI users] unable to launch a job on a system with OmniPath It took some time but my colleague was able to build OpenMPI and get it working with OmniPath, however the performance is quite disappointing. The configuration line used was the following: ./configure --prefix=$INSTALL_PATH --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --enable-shared --with-hwloc=$EBROOTHWLOC --with-psm2 --with-ofi=$EBROOTLIBFABRIC --with-libevent=$EBROOTLIBEVENT --without-orte --disable-oshmem --with-gpfs --with-slurm --with-pmix=external --with-libevent=external --with-ompi-pmix-rte /usr/bin/srun --cpu-bind=none --mpi=pspmix --ntasks-per-node 1 -n 2 xenv -L Architecture/KNL -L GCC -L OpenMPI env OMPI_MCA_btl_base_verbose="99" OMPI_MCA_mtl_base_verbose="99" numactl --physcpubind=1 ./osu_bw ... [node:18318] select: init of component ofi returned success [node:18318] mca: base: components_register: registering framework mtl components [node:18318] mca: base: components_register: found loaded component ofi [node:18318] mca: base: components_register: component ofi register function successful [node:18318] mca: base: components_open: opening mtl components [node:18318] mca: base: components_open: found loaded component ofi [node:18318] mca: base: components_open: component ofi open function successful [node:18318] mca:base:select: Auto-selecting mtl components [node:18318] mca:base:select:( mtl) Querying component [ofi] [node:18318] mca:base:select:( mtl) Query of component [ofi] set priority to 25 [node:18318] mca:base:select:( mtl) Selected component [ofi] [node:18318] select: initializing mtl component ofi [node:18318] mtl_ofi_component.c:378: mtl:ofi:provider: hfi1_0 ... # OSU MPI Bandwidth Test v5.7 # Size Bandwidth (MB/s) 1 0.05 2 0.10 4 0.20 8 0.41 16 0.77 32 1.54 64 3.10 128 6.09 256 12.39 512 24.23 1024 46.85 2048 87.99 4096 100.72 8192 139.91 16384 173.67 32768 197.82 65536 210.15 131072 215.76 262144 214.39 524288 219.23 1048576 223.53 2097152 226.93 4194304 227.62 If I test directly with `ib_write_bw` I get #bytes #iterations BW peak[MB/sec] BW average[MB/sec] MsgRate[Mpps] Conflicting CPU frequency values detected: 1498.727000 != 1559.017000. CPU Frequency is not max. 65536 5000 2421.04 2064.33 0.033029 I also tried adding `OMPI_MCA_mtl="psm2"` however the job crashes in that case: ``` Error obtaining unique transport key from ORTE (orte_precondition_transports not present in the environment). ``` Which is a bit puzzling considering that OpenMPI was build with `--witout-orte` Dear Pavel, I can't help you but just in case in the text: Which is a bit puzzling considering that OpenMPI was build with `--witout-orte` it should be `--without-orte` ?? Regards, Jorge D' Elia. -- CIMEC (UNL-CONICET), http://www.cimec.org.ar/<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cimec.org.ar%2F&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C716218ae48c54cdf446a08d91adb2859%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637570350863467474%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=B7l2zPvC9%2B%2B5gn4t4F%2FAXzWsGhkiCc%2FfFxGbY34Pc34%3D&reserved=0> Predio CONICET-Santa Fe, Colec. Ruta Nac. 168, Paraje El Pozo, 3000, Santa Fe, ARGENTINA. Tel +54-342-4511594/95 ext 7062, fax: +54-342-4511169 What am I missing and how can I improve the performance? Regards, Pavel Mezentsev. On Mon, May 10, 2021 at 6:20 PM Heinz, Michael William < michael.william.he...@cornelisnetworks.com<mailto:michael.william.he...@cornelisnetworks.com>> wrote: *That warning is an annoying bit of cruft from the openib / verbs provider that can be ignored. (Actually, I recommend using "-btl ^openib" to suppress the warning.)* *That said, there is a known issue with selecting PSM2 and OMPI 4.1.0. I'm not sure that that's the problem you're hitting, though, because you really haven't provided a lot of information.* *I would suggest trying the following to see what happens:* *${PATH_TO_OMPI}/mpirun -mca mtl psm2 -mca btl ^openib -mca mtl_base_verbose 99 -mca btl_base_verbose 99 -n ${N} -H ${HOSTS} my_application* *This should give you detailed information on what transports were selected and what happened next.* *Oh - and make sure your fabric is up with an opainfo or opareport command, just to make sure.* *From:* users <users-boun...@lists.open-mpi.org<mailto:users-boun...@lists.open-mpi.org>> *On Behalf Of *Pavel Mezentsev via users *Sent:* Monday, May 10, 2021 8:41 AM *To:* users@lists.open-mpi.org<mailto:users@lists.open-mpi.org> *Cc:* Pavel Mezentsev <pavel.mezent...@gmail.com<mailto:pavel.mezent...@gmail.com>> *Subject:* [OMPI users] unable to launch a job on a system with OmniPath Hi! I'm working on a system with KNL and OmniPath and I'm trying to launch a job but it fails. Could someone please advise what parameters I need to add to make it work properly? At first I need to make it work within one node, however later I need to use multiple nodes and eventually I may need to switch to TCP to run a hybrid job where some nodes are connected via Infiniband and some nodes are connected via OmniPath. So far without any extra parameters I get: ``` By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: XXXXXX Local adapter: hfi1_0 Local port: 1 ``` If I add `OMPI_MCA_btl_openib_allow_ib="true"` then I get: ``` Error obtaining unique transport key from ORTE (orte_precondition_transports not present in the environment). Local host: XXXXXX ``` Then I tried adding OMPI_MCA_mtl="psm2" or OMPI_MCA_mtl="ofi" to make it use omnipath or OMPI_MCA_btl="sm,self" to make it use only shared memory. But these parameters did not make any difference. There does not seem to be much omni-path related documentation, at least I was not able to find anything that would help me but perhaps I missed something: https://www.open-mpi.org/faq/?category=running#opa-support<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Drunning%23opa-support&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C716218ae48c54cdf446a08d91adb2859%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637570350863467474%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=u%2Beae5QdATAEN%2BtZ8FU8krXyVGlaYoE%2BzX6hhfRGtd0%3D&reserved=0> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Drunning%23opa-support&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C57fa32f71d054ebd6a5a08d913cd8fbf%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637562595871907805%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=kJ830bXfZmIMEg4hJkdEw8D6lw66aooAjHMpLL7NZ8c%3D&reserved=0<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Drunning%23opa-support&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C716218ae48c54cdf446a08d91adb2859%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637570350863477424%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=Au4jkZX4Q5hbtRCoV7sDWbjOZMCbhfGOeVXRyrzvrXs%3D&reserved=0>> https://www.open-mpi.org/faq/?category=opa<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Dopa&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C716218ae48c54cdf446a08d91adb2859%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637570350863477424%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=WczRN4S6LfXBr6%2BUKMCe1L8TgjjXGL4PoEhCxnD1%2FFg%3D&reserved=0> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Dopa&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C57fa32f71d054ebd6a5a08d913cd8fbf%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637562595871907805%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=SavN0pUsMxdufMBzrTyqSNCNHTVRMA1EUqlcWUMDcBo%3D&reserved=0<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.open-mpi.org%2Ffaq%2F%3Fcategory%3Dopa&data=04%7C01%7Cmichael.william.heinz%40cornelisnetworks.com%7C716218ae48c54cdf446a08d91adb2859%7C4dbdb7da74ee4b458747ef5ce5ebe68a%7C0%7C0%7C637570350863477424%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=WczRN4S6LfXBr6%2BUKMCe1L8TgjjXGL4PoEhCxnD1%2FFg%3D&reserved=0>> This is the `configure` line: ``` ./configure --prefix=XXXXX --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --enable-shared --with-hwloc=$EBROOTHWLOC --with-psm2 --with-libevent=$EBROOTLIBEVENT --without-orte --disable-oshmem --with-cuda=$EBROOTCUDA --with-gpfs --with-slurm --with-pmix=external --with-libevent=external --with-ompi-pmix-rte ``` Which also raises another question: if it was built with `--without-orte` then why do I get an error about failing to get something from ORTE. The OpenMPI version is `4.1.0rc1` built with `gcc-9.3.0`. Thank you in advance! Regards, Pavel Mezentsev.
