How do I know that? I'm not a Linux expert. I simply want to get OpenMPI running on Arch Linux so that I can test out their Java wrappers which I obviously can't on Termux since it doesn't support OpenJDK.
On Thu, 25 Feb 2021, 13:37 Gilles Gouaillardet via users, < users@lists.open-mpi.org> wrote: > Is SELinux running on ArchLinux under Termux? > > On 2/25/2021 4:36 PM, LINUS FERNANDES via users wrote: > > Yes, I did not receive this in my inbox since I set to receive digest. > > > > -------- > > ifconfig output: > > > > dummy0: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500 > > inet6 fe80::38a0:1bff:fe81:d4f5 prefixlen 64 scopeid 0x20<link> > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 0 (UNSPEC) > > RX packets 0 bytes 0 (0.0 B) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 3 bytes 210 (210.0 B) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > > inet 127.0.0.1 netmask 255.0.0.0 > > inet6 ::1 prefixlen 128 scopeid 0x10<host> > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 0 (UNSPEC) > > RX packets 17247 bytes 2062939 (1.9 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 17247 bytes 2062939 (1.9 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > p2p0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 1000 (UNSPEC) > > RX packets 0 bytes 0 (0.0 B) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 0 bytes 0 (0.0 B) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > rmnet_data0: flags=65<UP,RUNNING> mtu 1500 > > inet 10.140.58.138 netmask 255.255.255.252 > > inet6 fe80::93a5:ad99:4660:adc4 prefixlen 64 scopeid 0x20<link> > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 1000 (UNSPEC) > > RX packets 416796 bytes 376287723 (358.8 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 318293 bytes 69933666 (66.6 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > rmnet_data7: flags=65<UP,RUNNING> mtu 2000 > > inet6 fe80::a6b7:c914:44de:639 prefixlen 64 scopeid 0x20<link> > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 1000 (UNSPEC) > > RX packets 8 bytes 620 (620.0 B) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 10 bytes 752 (752.0 B) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > rmnet_ipa0: flags=65<UP,RUNNING> mtu 2000 > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 1000 (UNSPEC) > > RX packets 222785 bytes 381290027 (363.6 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 318303 bytes 69934418 (66.6 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > txqueuelen 1000 (UNSPEC) > > RX packets 650238 bytes 739939859 (705.6 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 408284 bytes 63728624 (60.7 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > ----- > > ip addr output: > > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > > group default > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state > > UNKNOWN group default > > link/ether 3a:a0:1b:81:d4:f5 brd ff:ff:ff:ff:ff:ff > > inet6 fe80::38a0:1bff:fe81:d4f5/64 scope link > > valid_lft forever preferred_lft forever > > 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default > > link/sit 0.0.0.0 brd 0.0.0.0 > > 4: rmnet_ipa0: <UP,LOWER_UP> mtu 2000 qdisc pfifo_fast state UNKNOWN > > group default qlen 1000 > > link/[530] > > 5: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN group > > default qlen 1000 > > link/[530] > > inet 10.140.58.138/30 <http://10.140.58.138/30> scope global > > rmnet_data0 > > valid_lft forever preferred_lft forever > > inet6 fe80::93a5:ad99:4660:adc4/64 scope link > > valid_lft forever preferred_lft forever > > 6: rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > > link/[530] > > 7: rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > > link/[530] > > 8: rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > > link/[530] > > 9: rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > > link/[530] > > 10: rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > > link/[530] > > 11: rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > > link/[530] > > 12: rmnet_data7: <UP,LOWER_UP> mtu 2000 qdisc htb state UNKNOWN group > > default qlen 1000 > > link/[530] > > inet6 fe80::a6b7:c914:44de:639/64 scope link > > valid_lft forever preferred_lft forever > > 13: r_rmnet_data0: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 14: r_rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 15: r_rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 16: r_rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 17: r_rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 18: r_rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 19: r_rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 20: r_rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 21: r_rmnet_data8: <> mtu 1500 qdisc noop state DOWN group default > > qlen 1000 > > link/[530] > > 22: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > > DOWN group default qlen 1000 > > link/ether 04:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff > > 23: p2p0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > > DOWN group default qlen 1000 > > link/ether 06:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff > > > > > > This is on Arch Linux on Termux. > > > > Similar output on Termux available. > > > > >
