Can you send the full output from autogen and configure? Also, this is probably better suited for the Devel list, since we're talking about OMPI internals.
Sent from my phone. No type good. On Feb 25, 2016, at 2:06 PM, dpchoudh . <dpcho...@gmail.com<mailto:dpcho...@gmail.com>> wrote: Hello Gilles Thank you very much for your advice. Yes, I copied the templates from the master branch to the 1.10.2 release, since the release does not have them. And yes, changing the Makefile.am as you suggest did make the autogen error go away. However, in the master branch, the autotools seem to be ignoring the new btl directory altogether; i.e. I do not get a Makefile.in from the Makefile.am. In the 1.10.2 release, doing an identical sequence of steps do create a Makefile.in from Makefile.am (via autogen) and a Makefile from Makefile.in (via configure), but of course, the new BTL does not build because the include paths in master and 1.10.2 are different. My Makefile.am and configure.m4 are as follows. Any thoughts on what it would take in the master branch to hook up the new BTL directory? --------opal/mca/btl/lf/configure.m4-------- # ------------------------------------------------ AC_DEFUN([MCA_opal_btl_lf_CONFIG],[ AC_CONFIG_FILES([opal/mca/btl/lf/Makefile]) ])dnl ------------opal/mca/btl/lf/Makefile.am------- amca_paramdir = $(AMCA_PARAM_SETS_DIR) dist_amca_param_DATA = netpipe-btl-lf.txt sources = \ btl_lf.c \ btl_lf.h \ btl_lf_component.c \ btl_lf_endpoint.c \ btl_lf_endpoint.h \ btl_lf_frag.c \ btl_lf_frag.h \ btl_lf_proc.c \ btl_lf_proc.h # Make the output library in this directory, and name it either # mca_<type>_<name>.la (for DSO builds) or libmca_<type>_<name>.la # (for static builds). if MCA_BUILD_opal_btl_lf_DSO lib = lib_sources = component = mca_btl_lf.la<http://mca_btl_lf.la> component_sources = $(sources) else lib = libmca_btl_lf.la<http://libmca_btl_lf.la> lib_sources = $(sources) component = component_sources = endif mcacomponentdir = $(opallibdir) mcacomponent_LTLIBRARIES = $(component) mca_btl_lf_la_SOURCES = $(component_sources) mca_btl_lf_la_LDFLAGS = -module -avoid-version noinst_LTLIBRARIES = $(lib) libmca_btl_lf_la_SOURCES = $(lib_sources) libmca_btl_lf_la_LDFLAGS = -module -avoid-version --------------------------------------------- Life is complex. It has real and imaginary parts. On Thu, Feb 25, 2016 at 3:10 AM, Gilles Gouaillardet <gilles.gouaillar...@gmail.com<mailto:gilles.gouaillar...@gmail.com>> wrote: Did you copy the template from the master branch into the v1.10 branch ? if so, you need to replacing MCA_BUILD_opal_btl_lf_DSO with MCA_BUILD_ompi_btl_lf_DSO will likely solve your issue. you do need a configure.m4 (otherwise your btl will not be built) but you do not need AC_MSG_FAILURE as far as i am concerned, i would develop in the master branch, and then back port it into the v1.10 branch when it is ready. fwiw, btl used to be in ompi/mca/btl (still the case in v1.10) and have been moved into opal/mca/btl since v2.x so it is quite common a bit of porting is required, most of the time, it consists in replacing OMPI like macros by OPAL like macros Cheers, Gilles On Thu, Feb 25, 2016 at 3:54 PM, dpchoudh . <dpcho...@gmail.com<mailto:dpcho...@gmail.com>> wrote: > Hello all > > I am not sure if this question belongs in the user list or the > developer list, but because it is a simpler question I am trying the > user list first. > > I am trying to add a new BTL for a proprietary transport. > > As step #0, I copied the BTL template, renamed the 'template' to > something else, and ran autogen.sh at the top level directory (of > openMPI 1.10.2). The Makefile.am is identical to what is provided in > the template except that all the 'template' has been substituted with > 'lf', the name of the fabric. > > With that, I get the following error: > > <snip> > > autoreconf: running: /usr/bin/autoconf --include=config --force > --warnings=all,no-obsolete,no-override > autoreconf: running: /usr/bin/autoheader --include=config --force > --warnings=all,no-obsolete,no-override > autoreconf: running: automake --add-missing --copy --force-missing > --warnings=all,no-obsolete,no-override > configure.ac:320<http://configure.ac:320>: installing 'config/compile' > configure.ac:73<http://configure.ac:73>: installing 'config/config.guess' > configure.ac:73<http://configure.ac:73>: installing 'config/config.sub' > configure.ac:93<http://configure.ac:93>: installing 'config/install-sh' > configure.ac:93<http://configure.ac:93>: installing 'config/missing' > ompi/Makefile.am: installing 'config/depcomp' > ompi/mca/btl/lf/Makefile.am:33: error: MCA_BUILD_opal_btl_lf_DSO does > not appear in AM_CONDITIONAL > > > I tried adding a configure.m4 file to the btl directory with the > following content: > > # MCA_btl_lf_CONFIG([action-if-can-compile], > # [action-if-cant-compile]) > # ------------------------------------------------ > AC_DEFUN([MCA_ompi_btl_lf_CONFIG],[ > AC_CONFIG_FILES([ompi/mca/btl/lf/Makefile]) > AC_MSG_FAILURE > ])dnl > > > but the error remains. > > I am sure I am missing at least one step, but am lost in the huge > codebase. Please help. > > Thank you > Durga > > Life is complex. It has real and imaginary parts. > _______________________________________________ > users mailing list > us...@open-mpi.org<mailto:us...@open-mpi.org> > Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/users > Link to this post: > http://www.open-mpi.org/community/lists/users/2016/02/28575.php _______________________________________________ users mailing list us...@open-mpi.org<mailto:us...@open-mpi.org> Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/users Link to this post: http://www.open-mpi.org/community/lists/users/2016/02/28576.php _______________________________________________ users mailing list us...@open-mpi.org<mailto:us...@open-mpi.org> Subscription: http://www.open-mpi.org/mailman/listinfo.cgi/users Link to this post: http://www.open-mpi.org/community/lists/users/2016/02/28577.php
