Someone suggested using some network address if all machines are on same
subnet.
They are all on the same subnet, I think. I have no idea what to put for
a param there.
I tried the ethernet address but of course it couldn't be that simple.
Here are my ifconfig
outputs from a couple of machines:
[root@RAID MPI]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:25:90:73:2A:36
inet addr:192.168.0.59 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fe73:2a36/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17983 errors:0 dropped:0 overruns:0 frame:0
TX packets:9952 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26309771 (25.0 MiB) TX bytes:758940 (741.1 KiB)
Interrupt:16 Memory:fbde0000-fbe00000
eth1 Link encap:Ethernet HWaddr 00:25:90:73:2A:37
inet6 addr: fe80::225:90ff:fe73:2a37/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3924 (3.8 KiB) TX bytes:468 (468.0 b)
Interrupt:17 Memory:fbee0000-fbf00000
And from one that I can't get to work:
[root@centos ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1E:4F:FB:30:34
inet6 addr: fe80::21e:4fff:fefb:3034/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:45 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2700 (2.6 KiB) TX bytes:468 (468.0 b)
Interrupt:21 Memory:fe9e0000-fea00000
eth1 Link encap:Ethernet HWaddr 00:14:D1:22:8E:50
inet addr:192.168.0.154 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::214:d1ff:fe22:8e50/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31053 (30.3 KiB) TX bytes:18897 (18.4 KiB)
Interrupt:16 Base address:0x2f00
The centos machine is using eth1 and not eth0, therein lies the problem.
I don't really need all this optimization of using multiple ethernet
adaptors to speed things
up. I am just using MPI to synchronize I/O tests. Can I go back to a
really old version
and avoid all this pain full debugging???
On Tue, May 6, 2014 at 6:50 PM, <users-requ...@open-mpi.org> wrote:
> Send users mailing list submissions to
> us...@open-mpi.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.open-mpi.org/mailman/listinfo.cgi/users
> or, via email, send a message with subject or body 'help' to
> users-requ...@open-mpi.org
>
> You can reach the person managing the list at
> users-ow...@open-mpi.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of users digest..."
>
>
> Today's Topics:
>
> 1. Re: users Digest, Vol 2881, Issue 1 (Clay Kirkland)
> 2. Re: users Digest, Vol 2881, Issue 1 (Clay Kirkland)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 6 May 2014 18:28:59 -0500
> From: Clay Kirkland <clay.kirkl...@versityinc.com>
> To: us...@open-mpi.org
> Subject: Re: [OMPI users] users Digest, Vol 2881, Issue 1
> Message-ID:
> <
> cajdnja90buhwu_ihssnna1a4p35+o96rrxk19xnhwo-nsd_...@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> That last trick seems to work. I can get it to work once in a while with
> those tcp options but it is
> tricky as I have three machines and two of them use eth0 as primary network
> interface and one
> uses eth1. But by fiddling with network options and perhaps moving a
> cable or two I think I can
> get it all to work Thanks much for the tip.
>
> Clay
>
>
> On Tue, May 6, 2014 at 11:00 AM, <users-requ...@open-mpi.org> wrote:
>
> > Send users mailing list submissions to
> > us...@open-mpi.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> > or, via email, send a message with subject or body 'help' to
> > users-requ...@open-mpi.org
> >
> > You can reach the person managing the list at
> > users-ow...@open-mpi.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: MPI_Barrier hangs on second attempt but only when
> > multiple hosts used. (Daniels, Marcus G)
> > 2. ROMIO bug reading darrays (Richard Shaw)
> > 3. MPI File Open does not work (Imran Ali)
> > 4. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> > 5. Re: MPI File Open does not work (Imran Ali)
> > 6. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> > 7. Re: MPI File Open does not work (Imran Ali)
> > 8. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> > 9. Re: users Digest, Vol 2879, Issue 1 (Jeff Squyres (jsquyres))
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Mon, 5 May 2014 19:28:07 +0000
> > From: "Daniels, Marcus G" <mdani...@lanl.gov>
> > To: "'us...@open-mpi.org'" <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI_Barrier hangs on second attempt but only
> > when multiple hosts used.
> > Message-ID:
> > <
> > 532c594b7920a549a2a91cb4312cc57640dc5...@ecs-exg-p-mb01.win.lanl.gov>
> > Content-Type: text/plain; charset="utf-8"
> >
> >
> >
> > From: Clay Kirkland [mailto:clay.kirkl...@versityinc.com]
> > Sent: Friday, May 02, 2014 03:24 PM
> > To: us...@open-mpi.org <us...@open-mpi.org>
> > Subject: [OMPI users] MPI_Barrier hangs on second attempt but only when
> > multiple hosts used.
> >
> > I have been using MPI for many many years so I have very well debugged
> mpi
> > tests. I am
> > having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions though
> > with getting the
> > MPI_Barrier calls to work. It works fine when I run all processes on
> one
> > machine but when
> > I run with two or more hosts the second call to MPI_Barrier always hangs.
> > Not the first one,
> > but always the second one. I looked at FAQ's and such but found nothing
> > except for a comment
> > that MPI_Barrier problems were often problems with fire walls. Also
> > mentioned as a problem
> > was not having the same version of mpi on both machines. I turned
> > firewalls off and removed
> > and reinstalled the same version on both hosts but I still see the same
> > thing. I then installed
> > lam mpi on two of my machines and that works fine. I can call the
> > MPI_Barrier function when run on
> > one of two machines by itself many times with no hangs. Only hangs if
> > two or more hosts are involved.
> > These runs are all being done on CentOS release 6.4. Here is test
> > program I used.
> >
> > main (argc, argv)
> > int argc;
> > char **argv;
> > {
> > char message[20];
> > char hoster[256];
> > char nameis[256];
> > int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> > MPI_Comm comm;
> > MPI_Status status;
> >
> > MPI_Init( &argc, &argv );
> > MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> > MPI_Comm_size( MPI_COMM_WORLD, &np);
> >
> > gethostname(hoster,256);
> >
> > printf(" In rank %d and host= %s Do Barrier call
> > 1.\n",myrank,hoster);
> > MPI_Barrier(MPI_COMM_WORLD);
> > printf(" In rank %d and host= %s Do Barrier call
> > 2.\n",myrank,hoster);
> > MPI_Barrier(MPI_COMM_WORLD);
> > printf(" In rank %d and host= %s Do Barrier call
> > 3.\n",myrank,hoster);
> > MPI_Barrier(MPI_COMM_WORLD);
> > MPI_Finalize();
> > exit(0);
> > }
> >
> > Here are three runs of test program. First with two processes on one
> > host, then with
> > two processes on another host, and finally with one process on each of
> two
> > hosts. The
> > first two runs are fine but the last run hangs on the second MPI_Barrier.
> >
> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> > In rank 0 and host= centos Do Barrier call 1.
> > In rank 1 and host= centos Do Barrier call 1.
> > In rank 1 and host= centos Do Barrier call 2.
> > In rank 1 and host= centos Do Barrier call 3.
> > In rank 0 and host= centos Do Barrier call 2.
> > In rank 0 and host= centos Do Barrier call 3.
> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> > /root/.bashrc: line 14: unalias: ls: not found
> > In rank 0 and host= RAID Do Barrier call 1.
> > In rank 0 and host= RAID Do Barrier call 2.
> > In rank 0 and host= RAID Do Barrier call 3.
> > In rank 1 and host= RAID Do Barrier call 1.
> > In rank 1 and host= RAID Do Barrier call 2.
> > In rank 1 and host= RAID Do Barrier call 3.
> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID a.out
> > /root/.bashrc: line 14: unalias: ls: not found
> > In rank 0 and host= centos Do Barrier call 1.
> > In rank 0 and host= centos Do Barrier call 2.
> > In rank 1 and host= RAID Do Barrier call 1.
> > In rank 1 and host= RAID Do Barrier call 2.
> >
> > Since it is such a simple test and problem and such a widely used MPI
> > function, it must obviously
> > be an installation or configuration problem. A pstack for each of the
> > hung MPI_Barrier processes
> > on the two machines shows this:
> >
> > [root@centos ~]# pstack 31666
> > #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from /lib64/libc.so.6
> > #1 0x00007f5de06125eb in epoll_dispatch () from
> /usr/local/lib/libmpi.so.1
> > #2 0x00007f5de061475a in opal_event_base_loop () from
> > /usr/local/lib/libmpi.so.1
> > #3 0x00007f5de0639229 in opal_progress () from
> /usr/local/lib/libmpi.so.1
> > #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> > /usr/local/lib/libmpi.so.1
> > #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > #7 0x00007f5de05941c2 in PMPI_Barrier () from /usr/local/lib/libmpi.so.1
> > #8 0x0000000000400a43 in main ()
> >
> > [root@RAID openmpi-1.6.5]# pstack 22167
> > #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from /lib64/libc.so.6
> > #1 0x00007f7ee46885eb in epoll_dispatch () from
> /usr/local/lib/libmpi.so.1
> > #2 0x00007f7ee468a75a in opal_event_base_loop () from
> > /usr/local/lib/libmpi.so.1
> > #3 0x00007f7ee46af229 in opal_progress () from
> /usr/local/lib/libmpi.so.1
> > #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> > /usr/local/lib/libmpi.so.1
> > #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > #7 0x00007f7ee460a1c2 in PMPI_Barrier () from /usr/local/lib/libmpi.so.1
> > #8 0x0000000000400a43 in main ()
> >
> > Which looks exactly the same on each machine. Any thoughts or ideas
> > would be greatly appreciated as
> > I am stuck.
> >
> > Clay Kirkland
> >
> >
> >
> >
> >
> >
> >
> >
> > -------------- next part --------------
> > HTML attachment scrubbed and removed
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Mon, 5 May 2014 22:20:59 -0400
> > From: Richard Shaw <jr...@cita.utoronto.ca>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: [OMPI users] ROMIO bug reading darrays
> > Message-ID:
> > <
> > can+evmkc+9kacnpausscziufwdj3jfcsymb-8zdx1etdkab...@mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hello,
> >
> > I think I've come across a bug when using ROMIO to read in a 2D
> distributed
> > array. I've attached a test case to this email.
> >
> > In the testcase I first initialise an array of 25 doubles (which will be
> a
> > 5x5 grid), then I create a datatype representing a 5x5 matrix distributed
> > in 3x3 blocks over a 2x2 process grid. As a reference I use MPI_Pack to
> > pull out the block cyclic array elements local to each process (which I
> > think is correct). Then I write the original array of 25 doubles to disk,
> > and use MPI-IO to read it back in (performing the Open, Set_view, and
> > Real_all), and compare to the reference.
> >
> > Running this with OMPI, the two match on all ranks.
> >
> > > mpirun -mca io ompio -np 4 ./darr_read.x
> > === Rank 0 === (9 elements)
> > Packed: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> > Read: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >
> > === Rank 1 === (6 elements)
> > Packed: 15.0 16.0 17.0 20.0 21.0 22.0
> > Read: 15.0 16.0 17.0 20.0 21.0 22.0
> >
> > === Rank 2 === (6 elements)
> > Packed: 3.0 4.0 8.0 9.0 13.0 14.0
> > Read: 3.0 4.0 8.0 9.0 13.0 14.0
> >
> > === Rank 3 === (4 elements)
> > Packed: 18.0 19.0 23.0 24.0
> > Read: 18.0 19.0 23.0 24.0
> >
> >
> >
> > However, using ROMIO the two differ on two of the ranks:
> >
> > > mpirun -mca io romio -np 4 ./darr_read.x
> > === Rank 0 === (9 elements)
> > Packed: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> > Read: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >
> > === Rank 1 === (6 elements)
> > Packed: 15.0 16.0 17.0 20.0 21.0 22.0
> > Read: 0.0 1.0 2.0 0.0 1.0 2.0
> >
> > === Rank 2 === (6 elements)
> > Packed: 3.0 4.0 8.0 9.0 13.0 14.0
> > Read: 3.0 4.0 8.0 9.0 13.0 14.0
> >
> > === Rank 3 === (4 elements)
> > Packed: 18.0 19.0 23.0 24.0
> > Read: 0.0 1.0 0.0 1.0
> >
> >
> >
> > My interpretation is that the behaviour with OMPIO is correct.
> > Interestingly everything matches up using both ROMIO and OMPIO if I set
> the
> > block shape to 2x2.
> >
> > This was run on OS X using 1.8.2a1r31632. I have also run this on Linux
> > with OpenMPI 1.7.4, and OMPIO is still correct, but using ROMIO I just
> get
> > segfaults.
> >
> > Thanks,
> > Richard
> > -------------- next part --------------
> > HTML attachment scrubbed and removed
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: darr_read.c
> > Type: text/x-csrc
> > Size: 2218 bytes
> > Desc: not available
> > URL: <
> >
> http://www.open-mpi.org/MailArchives/users/attachments/20140505/5a5ab0ba/attachment.bin
> > >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 06 May 2014 13:24:35 +0200
> > From: Imran Ali <imra...@student.matnat.uio.no>
> > To: <us...@open-mpi.org>
> > Subject: [OMPI users] MPI File Open does not work
> > Message-ID: <d57bdf499c00360b737205b085c50...@ulrik.uio.no>
> > Content-Type: text/plain; charset="utf-8"
> >
> >
> >
> > I get the following error when I try to run the following python
> > code
> > import mpi4py.MPI as MPI
> > comm = MPI.COMM_WORLD
> >
> > MPI.File.Open(comm,"some.file")
> >
> > $ mpirun -np 1 python
> > test_mpi.py
> > Traceback (most recent call last):
> > File "test_mpi.py", line
> > 3, in <module>
> > MPI.File.Open(comm," h5ex_d_alloc.h5")
> > File "File.pyx",
> > line 67, in mpi4py.MPI.File.Open
> > (src/mpi4py.MPI.c:89639)
> > mpi4py.MPI.Exception: MPI_ERR_OTHER: known
> > error not in
> > list
> >
> --------------------------------------------------------------------------
> > mpirun
> > noticed that the job aborted, but has no info as to the process
> > that
> > caused that
> > situation.
> >
> --------------------------------------------------------------------------
> >
> >
> > My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> > dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise 6
> > (OS I am using, release 6.5) . It configured the build as following :
> >
> >
> > ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> > --with-threads=posix --disable-mpi-profile
> >
> > I need emphasize that I do
> > not have root acces on the system I am running my application.
> >
> > Imran
> >
> >
> >
> > -------------- next part --------------
> > HTML attachment scrubbed and removed
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 6 May 2014 12:56:04 +0000
> > From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI File Open does not work
> > Message-ID: <e7df28cb-d4fb-4087-928e-18e61d1d2...@cisco.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > The thread support in the 1.6 series is not very good. You might try:
> >
> > - Upgrading to 1.6.5
> > - Or better yet, upgrading to 1.8.1
> >
> >
> > On May 6, 2014, at 7:24 AM, Imran Ali <imra...@student.matnat.uio.no>
> > wrote:
> >
> > > I get the following error when I try to run the following python code
> > >
> > > import mpi4py.MPI as MPI
> > > comm = MPI.COMM_WORLD
> > > MPI.File.Open(comm,"some.file")
> > >
> > > $ mpirun -np 1 python test_mpi.py
> > > Traceback (most recent call last):
> > > File "test_mpi.py", line 3, in <module>
> > > MPI.File.Open(comm," h5ex_d_alloc.h5")
> > > File "File.pyx", line 67, in mpi4py.MPI.File.Open
> > (src/mpi4py.MPI.c:89639)
> > > mpi4py.MPI.Exception: MPI_ERR_OTHER: known error not in list
> > >
> >
> --------------------------------------------------------------------------
> > > mpirun noticed that the job aborted, but has no info as to the process
> > > that caused that situation.
> > >
> >
> --------------------------------------------------------------------------
> > >
> > > My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> > dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise 6
> > (OS I am using, release 6.5) . It configured the build as following :
> > >
> > > ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> > --with-threads=posix --disable-mpi-profile
> > >
> > > I need emphasize that I do not have root acces on the system I am
> > running my application.
> > >
> > > Imran
> > >
> > >
> > > _______________________________________________
> > > users mailing list
> > > us...@open-mpi.org
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >
> >
> > --
> > Jeff Squyres
> > jsquy...@cisco.com
> > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 6 May 2014 15:32:21 +0200
> > From: Imran Ali <imra...@student.matnat.uio.no>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI File Open does not work
> > Message-ID: <fa6dffff-6c66-4a47-84fc-148fb51ce...@math.uio.no>
> > Content-Type: text/plain; charset=us-ascii
> >
> >
> > 6. mai 2014 kl. 14:56 skrev Jeff Squyres (jsquyres) <jsquy...@cisco.com
> >:
> >
> > > The thread support in the 1.6 series is not very good. You might try:
> > >
> > > - Upgrading to 1.6.5
> > > - Or better yet, upgrading to 1.8.1
> > >
> >
> > I will attempt that than. I read at
> >
> > http://www.open-mpi.org/faq/?category=building#install-overwrite
> >
> > that I should completely uninstall my previous version. Could you
> > recommend to me how I can go about doing it (without root access).
> > I am uncertain where I can use make uninstall.
> >
> > Imran
> >
> > >
> > > On May 6, 2014, at 7:24 AM, Imran Ali <imra...@student.matnat.uio.no>
> > wrote:
> > >
> > >> I get the following error when I try to run the following python code
> > >>
> > >> import mpi4py.MPI as MPI
> > >> comm = MPI.COMM_WORLD
> > >> MPI.File.Open(comm,"some.file")
> > >>
> > >> $ mpirun -np 1 python test_mpi.py
> > >> Traceback (most recent call last):
> > >> File "test_mpi.py", line 3, in <module>
> > >> MPI.File.Open(comm," h5ex_d_alloc.h5")
> > >> File "File.pyx", line 67, in mpi4py.MPI.File.Open
> > (src/mpi4py.MPI.c:89639)
> > >> mpi4py.MPI.Exception: MPI_ERR_OTHER: known error not in list
> > >>
> >
> --------------------------------------------------------------------------
> > >> mpirun noticed that the job aborted, but has no info as to the process
> > >> that caused that situation.
> > >>
> >
> --------------------------------------------------------------------------
> > >>
> > >> My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> > dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise 6
> > (OS I am using, release 6.5) . It configured the build as following :
> > >>
> > >> ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> > --with-threads=posix --disable-mpi-profile
> > >>
> > >> I need emphasize that I do not have root acces on the system I am
> > running my application.
> > >>
> > >> Imran
> > >>
> > >>
> > >> _______________________________________________
> > >> users mailing list
> > >> us...@open-mpi.org
> > >> http://www.open-mpi.org/mailman/listinfo.cgi/users
> > >
> > >
> > > --
> > > Jeff Squyres
> > > jsquy...@cisco.com
> > > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> > >
> > > _______________________________________________
> > > users mailing list
> > > us...@open-mpi.org
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Tue, 6 May 2014 13:34:38 +0000
> > From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI File Open does not work
> > Message-ID: <2a933c0e-80f6-4ded-b44c-53b5f37ef...@cisco.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > On May 6, 2014, at 9:32 AM, Imran Ali <imra...@student.matnat.uio.no>
> > wrote:
> >
> > > I will attempt that than. I read at
> > >
> > > http://www.open-mpi.org/faq/?category=building#install-overwrite
> > >
> > > that I should completely uninstall my previous version.
> >
> > Yes, that is best. OR: you can install into a whole separate tree and
> > ignore the first installation.
> >
> > > Could you recommend to me how I can go about doing it (without root
> > access).
> > > I am uncertain where I can use make uninstall.
> >
> > If you don't have write access into the installation tree (i.e., it was
> > installed via root and you don't have root access), then your best bet is
> > simply to install into a new tree. E.g., if OMPI is installed into
> > /opt/openmpi-1.6.2, try installing into /opt/openmpi-1.6.5, or even
> > $HOME/installs/openmpi-1.6.5, or something like that.
> >
> > --
> > Jeff Squyres
> > jsquy...@cisco.com
> > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> >
> >
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Tue, 6 May 2014 15:40:34 +0200
> > From: Imran Ali <imra...@student.matnat.uio.no>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI File Open does not work
> > Message-ID: <14f0596c-c5c5-4b1a-a4a8-8849d44ab...@math.uio.no>
> > Content-Type: text/plain; charset=us-ascii
> >
> >
> > 6. mai 2014 kl. 15:34 skrev Jeff Squyres (jsquyres) <jsquy...@cisco.com
> >:
> >
> > > On May 6, 2014, at 9:32 AM, Imran Ali <imra...@student.matnat.uio.no>
> > wrote:
> > >
> > >> I will attempt that than. I read at
> > >>
> > >> http://www.open-mpi.org/faq/?category=building#install-overwrite
> > >>
> > >> that I should completely uninstall my previous version.
> > >
> > > Yes, that is best. OR: you can install into a whole separate tree and
> > ignore the first installation.
> > >
> > >> Could you recommend to me how I can go about doing it (without root
> > access).
> > >> I am uncertain where I can use make uninstall.
> > >
> > > If you don't have write access into the installation tree (i.e., it was
> > installed via root and you don't have root access), then your best bet is
> > simply to install into a new tree. E.g., if OMPI is installed into
> > /opt/openmpi-1.6.2, try installing into /opt/openmpi-1.6.5, or even
> > $HOME/installs/openmpi-1.6.5, or something like that.
> >
> > My install was in my user directory (i.e $HOME). I managed to locate the
> > source directory and successfully run make uninstall.
> >
> > Will let you know how things went after installation.
> >
> > Imran
> >
> > >
> > > --
> > > Jeff Squyres
> > > jsquy...@cisco.com
> > > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> > >
> > > _______________________________________________
> > > users mailing list
> > > us...@open-mpi.org
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >
> >
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Tue, 6 May 2014 14:42:52 +0000
> > From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] MPI File Open does not work
> > Message-ID: <710e3328-edaa-4a13-9f07-b45fe3191...@cisco.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > On May 6, 2014, at 9:40 AM, Imran Ali <imra...@student.matnat.uio.no>
> > wrote:
> >
> > > My install was in my user directory (i.e $HOME). I managed to locate
> the
> > source directory and successfully run make uninstall.
> >
> >
> > FWIW, I usually install Open MPI into its own subdir. E.g.,
> > $HOME/installs/openmpi-x.y.z. Then if I don't want that install any
> more,
> > I can just "rm -rf $HOME/installs/openmpi-x.y.z" -- no need to "make
> > uninstall". Specifically: if there's nothing else installed in the same
> > tree as Open MPI, you can just rm -rf its installation tree.
> >
> > --
> > Jeff Squyres
> > jsquy...@cisco.com
> > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> >
> >
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Tue, 6 May 2014 14:50:34 +0000
> > From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> > To: Open MPI Users <us...@open-mpi.org>
> > Subject: Re: [OMPI users] users Digest, Vol 2879, Issue 1
> > Message-ID: <c60aa7e1-96a7-4ccd-9b5b-11a38fb87...@cisco.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Are you using TCP as the MPI transport?
> >
> > If so, another thing to try is to limit the IP interfaces that MPI uses
> > for its traffic to see if there's some kind of problem with specific
> > networks.
> >
> > For example:
> >
> > mpirun --mca btl_tcp_if_include eth0 ...
> >
> > If that works, then try adding in any/all other IP interfaces that you
> > have on your machines.
> >
> > A sorta-wild guess: you have some IP interfaces that aren't working, or
> at
> > least, don't work in the way that OMPI wants them to work. So the first
> > barrier works because it flows across eth0 (or some other first network
> > that, as far as OMPI is concerned, works just fine). But then the next
> > barrier round-robin advances to the next IP interface, and it doesn't
> work
> > for some reason.
> >
> > We've seen virtual machine bridge interfaces cause problems, for example.
> > E.g., if a machine has a Xen virtual machine interface (vibr0, IIRC?),
> > then OMPI will try to use it to communicate with peer MPI processes
> because
> > it has a "compatible" IP address, and OMPI think it should be
> > connected/reachable to peers. If this is the case, you might want to
> > disable such interfaces and/or use btl_tcp_if_include or
> btl_tcp_if_exclude
> > to select the interfaces that you want to use.
> >
> > Pro tip: if you use btl_tcp_if_exclude, remember to exclude the loopback
> > interface, too. OMPI defaults to a btl_tcp_if_include="" (blank) and
> > btl_tcp_if_exclude="lo0". So if you override btl_tcp_if_exclude, you need
> > to be sure to *also* include lo0 in the new value. For example:
> >
> > mpirun --mca btl_tcp_if_exclude lo0,virb0 ...
> >
> > Also, if possible, try upgrading to Open MPI 1.8.1.
> >
> >
> >
> > On May 4, 2014, at 2:15 PM, Clay Kirkland <clay.kirkl...@versityinc.com>
> > wrote:
> >
> > > I am configuring with all defaults. Just doing a ./configure and
> then
> > > make and make install. I have used open mpi on several kinds of
> > > unix systems this way and have had no trouble before. I believe I
> > > last had success on a redhat version of linux.
> > >
> > >
> > > On Sat, May 3, 2014 at 11:00 AM, <users-requ...@open-mpi.org> wrote:
> > > Send users mailing list submissions to
> > > us...@open-mpi.org
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> > > or, via email, send a message with subject or body 'help' to
> > > users-requ...@open-mpi.org
> > >
> > > You can reach the person managing the list at
> > > users-ow...@open-mpi.org
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. MPI_Barrier hangs on second attempt but only when multiple
> > > hosts used. (Clay Kirkland)
> > > 2. Re: MPI_Barrier hangs on second attempt but only when
> > > multiple hosts used. (Ralph Castain)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Fri, 2 May 2014 16:24:04 -0500
> > > From: Clay Kirkland <clay.kirkl...@versityinc.com>
> > > To: us...@open-mpi.org
> > > Subject: [OMPI users] MPI_Barrier hangs on second attempt but only
> > > when multiple hosts used.
> > > Message-ID:
> > > <CAJDnjA8Wi=FEjz6Vz+Bc34b+nFE=
> > tf4b7g0bqgmbekg7h-p...@mail.gmail.com>
> > > Content-Type: text/plain; charset="utf-8"
> > >
> > > I have been using MPI for many many years so I have very well debugged
> > mpi
> > > tests. I am
> > > having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions
> though
> > > with getting the
> > > MPI_Barrier calls to work. It works fine when I run all processes on
> > one
> > > machine but when
> > > I run with two or more hosts the second call to MPI_Barrier always
> hangs.
> > > Not the first one,
> > > but always the second one. I looked at FAQ's and such but found
> nothing
> > > except for a comment
> > > that MPI_Barrier problems were often problems with fire walls. Also
> > > mentioned as a problem
> > > was not having the same version of mpi on both machines. I turned
> > > firewalls off and removed
> > > and reinstalled the same version on both hosts but I still see the same
> > > thing. I then installed
> > > lam mpi on two of my machines and that works fine. I can call the
> > > MPI_Barrier function when run on
> > > one of two machines by itself many times with no hangs. Only hangs if
> > two
> > > or more hosts are involved.
> > > These runs are all being done on CentOS release 6.4. Here is test
> > program
> > > I used.
> > >
> > > main (argc, argv)
> > > int argc;
> > > char **argv;
> > > {
> > > char message[20];
> > > char hoster[256];
> > > char nameis[256];
> > > int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> > > MPI_Comm comm;
> > > MPI_Status status;
> > >
> > > MPI_Init( &argc, &argv );
> > > MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> > > MPI_Comm_size( MPI_COMM_WORLD, &np);
> > >
> > > gethostname(hoster,256);
> > >
> > > printf(" In rank %d and host= %s Do Barrier call
> > > 1.\n",myrank,hoster);
> > > MPI_Barrier(MPI_COMM_WORLD);
> > > printf(" In rank %d and host= %s Do Barrier call
> > > 2.\n",myrank,hoster);
> > > MPI_Barrier(MPI_COMM_WORLD);
> > > printf(" In rank %d and host= %s Do Barrier call
> > > 3.\n",myrank,hoster);
> > > MPI_Barrier(MPI_COMM_WORLD);
> > > MPI_Finalize();
> > > exit(0);
> > > }
> > >
> > > Here are three runs of test program. First with two processes on one
> > > host, then with
> > > two processes on another host, and finally with one process on each of
> > two
> > > hosts. The
> > > first two runs are fine but the last run hangs on the second
> MPI_Barrier.
> > >
> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> > > In rank 0 and host= centos Do Barrier call 1.
> > > In rank 1 and host= centos Do Barrier call 1.
> > > In rank 1 and host= centos Do Barrier call 2.
> > > In rank 1 and host= centos Do Barrier call 3.
> > > In rank 0 and host= centos Do Barrier call 2.
> > > In rank 0 and host= centos Do Barrier call 3.
> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> > > /root/.bashrc: line 14: unalias: ls: not found
> > > In rank 0 and host= RAID Do Barrier call 1.
> > > In rank 0 and host= RAID Do Barrier call 2.
> > > In rank 0 and host= RAID Do Barrier call 3.
> > > In rank 1 and host= RAID Do Barrier call 1.
> > > In rank 1 and host= RAID Do Barrier call 2.
> > > In rank 1 and host= RAID Do Barrier call 3.
> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID
> a.out
> > > /root/.bashrc: line 14: unalias: ls: not found
> > > In rank 0 and host= centos Do Barrier call 1.
> > > In rank 0 and host= centos Do Barrier call 2.
> > > In rank 1 and host= RAID Do Barrier call 1.
> > > In rank 1 and host= RAID Do Barrier call 2.
> > >
> > > Since it is such a simple test and problem and such a widely used MPI
> > > function, it must obviously
> > > be an installation or configuration problem. A pstack for each of the
> > > hung MPI_Barrier processes
> > > on the two machines shows this:
> > >
> > > [root@centos ~]# pstack 31666
> > > #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from
> /lib64/libc.so.6
> > > #1 0x00007f5de06125eb in epoll_dispatch () from
> > /usr/local/lib/libmpi.so.1
> > > #2 0x00007f5de061475a in opal_event_base_loop () from
> > > /usr/local/lib/libmpi.so.1
> > > #3 0x00007f5de0639229 in opal_progress () from
> > /usr/local/lib/libmpi.so.1
> > > #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> > > /usr/local/lib/libmpi.so.1
> > > #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> > > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs ()
> from
> > > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > #7 0x00007f5de05941c2 in PMPI_Barrier () from
> /usr/local/lib/libmpi.so.1
> > > #8 0x0000000000400a43 in main ()
> > >
> > > [root@RAID openmpi-1.6.5]# pstack 22167
> > > #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from
> /lib64/libc.so.6
> > > #1 0x00007f7ee46885eb in epoll_dispatch () from
> > /usr/local/lib/libmpi.so.1
> > > #2 0x00007f7ee468a75a in opal_event_base_loop () from
> > > /usr/local/lib/libmpi.so.1
> > > #3 0x00007f7ee46af229 in opal_progress () from
> > /usr/local/lib/libmpi.so.1
> > > #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> > > /usr/local/lib/libmpi.so.1
> > > #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> > > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs ()
> from
> > > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > #7 0x00007f7ee460a1c2 in PMPI_Barrier () from
> /usr/local/lib/libmpi.so.1
> > > #8 0x0000000000400a43 in main ()
> > >
> > > Which looks exactly the same on each machine. Any thoughts or ideas
> > would
> > > be greatly appreciated as
> > > I am stuck.
> > >
> > > Clay Kirkland
> > > -------------- next part --------------
> > > HTML attachment scrubbed and removed
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Sat, 3 May 2014 06:39:20 -0700
> > > From: Ralph Castain <r...@open-mpi.org>
> > > To: Open MPI Users <us...@open-mpi.org>
> > > Subject: Re: [OMPI users] MPI_Barrier hangs on second attempt but only
> > > when multiple hosts used.
> > > Message-ID: <3cf53d73-15d9-40bb-a2de-50ba3561a...@open-mpi.org>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > Hmmm...just testing on my little cluster here on two nodes, it works
> > just fine with 1.8.2:
> > >
> > > [rhc@bend001 v1.8]$ mpirun -n 2 --map-by node ./a.out
> > > In rank 0 and host= bend001 Do Barrier call 1.
> > > In rank 0 and host= bend001 Do Barrier call 2.
> > > In rank 0 and host= bend001 Do Barrier call 3.
> > > In rank 1 and host= bend002 Do Barrier call 1.
> > > In rank 1 and host= bend002 Do Barrier call 2.
> > > In rank 1 and host= bend002 Do Barrier call 3.
> > > [rhc@bend001 v1.8]$
> > >
> > >
> > > How are you configuring OMPI?
> > >
> > >
> > > On May 2, 2014, at 2:24 PM, Clay Kirkland <
> clay.kirkl...@versityinc.com>
> > wrote:
> > >
> > > > I have been using MPI for many many years so I have very well
> debugged
> > mpi tests. I am
> > > > having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions
> > though with getting the
> > > > MPI_Barrier calls to work. It works fine when I run all processes
> on
> > one machine but when
> > > > I run with two or more hosts the second call to MPI_Barrier always
> > hangs. Not the first one,
> > > > but always the second one. I looked at FAQ's and such but found
> > nothing except for a comment
> > > > that MPI_Barrier problems were often problems with fire walls. Also
> > mentioned as a problem
> > > > was not having the same version of mpi on both machines. I turned
> > firewalls off and removed
> > > > and reinstalled the same version on both hosts but I still see the
> > same thing. I then installed
> > > > lam mpi on two of my machines and that works fine. I can call the
> > MPI_Barrier function when run on
> > > > one of two machines by itself many times with no hangs. Only hangs
> > if two or more hosts are involved.
> > > > These runs are all being done on CentOS release 6.4. Here is test
> > program I used.
> > > >
> > > > main (argc, argv)
> > > > int argc;
> > > > char **argv;
> > > > {
> > > > char message[20];
> > > > char hoster[256];
> > > > char nameis[256];
> > > > int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> > > > MPI_Comm comm;
> > > > MPI_Status status;
> > > >
> > > > MPI_Init( &argc, &argv );
> > > > MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> > > > MPI_Comm_size( MPI_COMM_WORLD, &np);
> > > >
> > > > gethostname(hoster,256);
> > > >
> > > > printf(" In rank %d and host= %s Do Barrier call
> > 1.\n",myrank,hoster);
> > > > MPI_Barrier(MPI_COMM_WORLD);
> > > > printf(" In rank %d and host= %s Do Barrier call
> > 2.\n",myrank,hoster);
> > > > MPI_Barrier(MPI_COMM_WORLD);
> > > > printf(" In rank %d and host= %s Do Barrier call
> > 3.\n",myrank,hoster);
> > > > MPI_Barrier(MPI_COMM_WORLD);
> > > > MPI_Finalize();
> > > > exit(0);
> > > > }
> > > >
> > > > Here are three runs of test program. First with two processes on
> > one host, then with
> > > > two processes on another host, and finally with one process on each
> of
> > two hosts. The
> > > > first two runs are fine but the last run hangs on the second
> > MPI_Barrier.
> > > >
> > > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> > > > In rank 0 and host= centos Do Barrier call 1.
> > > > In rank 1 and host= centos Do Barrier call 1.
> > > > In rank 1 and host= centos Do Barrier call 2.
> > > > In rank 1 and host= centos Do Barrier call 3.
> > > > In rank 0 and host= centos Do Barrier call 2.
> > > > In rank 0 and host= centos Do Barrier call 3.
> > > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> > > > /root/.bashrc: line 14: unalias: ls: not found
> > > > In rank 0 and host= RAID Do Barrier call 1.
> > > > In rank 0 and host= RAID Do Barrier call 2.
> > > > In rank 0 and host= RAID Do Barrier call 3.
> > > > In rank 1 and host= RAID Do Barrier call 1.
> > > > In rank 1 and host= RAID Do Barrier call 2.
> > > > In rank 1 and host= RAID Do Barrier call 3.
> > > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID
> > a.out
> > > > /root/.bashrc: line 14: unalias: ls: not found
> > > > In rank 0 and host= centos Do Barrier call 1.
> > > > In rank 0 and host= centos Do Barrier call 2.
> > > > In rank 1 and host= RAID Do Barrier call 1.
> > > > In rank 1 and host= RAID Do Barrier call 2.
> > > >
> > > > Since it is such a simple test and problem and such a widely used
> > MPI function, it must obviously
> > > > be an installation or configuration problem. A pstack for each of
> > the hung MPI_Barrier processes
> > > > on the two machines shows this:
> > > >
> > > > [root@centos ~]# pstack 31666
> > > > #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from
> > /lib64/libc.so.6
> > > > #1 0x00007f5de06125eb in epoll_dispatch () from
> > /usr/local/lib/libmpi.so.1
> > > > #2 0x00007f5de061475a in opal_event_base_loop () from
> > /usr/local/lib/libmpi.so.1
> > > > #3 0x00007f5de0639229 in opal_progress () from
> > /usr/local/lib/libmpi.so.1
> > > > #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> > /usr/local/lib/libmpi.so.1
> > > > #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > > #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs ()
> > from /usr/local/lib/openmpi/mca_coll_tuned.so
> > > > #7 0x00007f5de05941c2 in PMPI_Barrier () from
> > /usr/local/lib/libmpi.so.1
> > > > #8 0x0000000000400a43 in main ()
> > > >
> > > > [root@RAID openmpi-1.6.5]# pstack 22167
> > > > #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from
> > /lib64/libc.so.6
> > > > #1 0x00007f7ee46885eb in epoll_dispatch () from
> > /usr/local/lib/libmpi.so.1
> > > > #2 0x00007f7ee468a75a in opal_event_base_loop () from
> > /usr/local/lib/libmpi.so.1
> > > > #3 0x00007f7ee46af229 in opal_progress () from
> > /usr/local/lib/libmpi.so.1
> > > > #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> > /usr/local/lib/libmpi.so.1
> > > > #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> > /usr/local/lib/openmpi/mca_coll_tuned.so
> > > > #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs ()
> > from /usr/local/lib/openmpi/mca_coll_tuned.so
> > > > #7 0x00007f7ee460a1c2 in PMPI_Barrier () from
> > /usr/local/lib/libmpi.so.1
> > > > #8 0x0000000000400a43 in main ()
> > > >
> > > > Which looks exactly the same on each machine. Any thoughts or ideas
> > would be greatly appreciated as
> > > > I am stuck.
> > > >
> > > > Clay Kirkland
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > users mailing list
> > > > us...@open-mpi.org
> > > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> > >
> > > -------------- next part --------------
> > > HTML attachment scrubbed and removed
> > >
> > > ------------------------------
> > >
> > > Subject: Digest Footer
> > >
> > > _______________________________________________
> > > users mailing list
> > > us...@open-mpi.org
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> > >
> > > ------------------------------
> > >
> > > End of users Digest, Vol 2879, Issue 1
> > > **************************************
> > >
> > > _______________________________________________
> > > users mailing list
> > > us...@open-mpi.org
> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >
> >
> > --
> > Jeff Squyres
> > jsquy...@cisco.com
> > For corporate legal information go to:
> > http://www.cisco.com/web/about/doing_business/legal/cri/
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > users mailing list
> > us...@open-mpi.org
> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >
> > ------------------------------
> >
> > End of users Digest, Vol 2881, Issue 1
> > **************************************
> >
> -------------- next part --------------
> HTML attachment scrubbed and removed
>
> ------------------------------
>
> Message: 2
> Date: Tue, 6 May 2014 18:50:50 -0500
> From: Clay Kirkland <clay.kirkl...@versityinc.com>
> To: us...@open-mpi.org
> Subject: Re: [OMPI users] users Digest, Vol 2881, Issue 1
> Message-ID:
> <
> cajdnja-u4btpto+87czsho81t+-a1jzottc7mwdfiar7+vz...@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Well it turns out I can't seem to get all three of my machines on the
> same page.
> Two of them are using eth0 and one is using eth1. Centos seems unable to
> bring
> up multiple network interfaces for some reason and when I use the mca param
> to
> use eth0 it works on two machines but not the other. Is there some way to
> use
> only eth1 on one host and only eth0 on the other two? Maybe environment
> variables
> but I can't seem to get that to work either.
>
> Clay
>
>
> On Tue, May 6, 2014 at 6:28 PM, Clay Kirkland
> <clay.kirkl...@versityinc.com>wrote:
>
> > That last trick seems to work. I can get it to work once in a while
> with
> > those tcp options but it is
> > tricky as I have three machines and two of them use eth0 as primary
> > network interface and one
> > uses eth1. But by fiddling with network options and perhaps moving a
> > cable or two I think I can
> > get it all to work Thanks much for the tip.
> >
> > Clay
> >
> >
> > On Tue, May 6, 2014 at 11:00 AM, <users-requ...@open-mpi.org> wrote:
> >
> >> Send users mailing list submissions to
> >> us...@open-mpi.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >> or, via email, send a message with subject or body 'help' to
> >> users-requ...@open-mpi.org
> >>
> >> You can reach the person managing the list at
> >> users-ow...@open-mpi.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of users digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: MPI_Barrier hangs on second attempt but only when
> >> multiple hosts used. (Daniels, Marcus G)
> >> 2. ROMIO bug reading darrays (Richard Shaw)
> >> 3. MPI File Open does not work (Imran Ali)
> >> 4. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> >> 5. Re: MPI File Open does not work (Imran Ali)
> >> 6. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> >> 7. Re: MPI File Open does not work (Imran Ali)
> >> 8. Re: MPI File Open does not work (Jeff Squyres (jsquyres))
> >> 9. Re: users Digest, Vol 2879, Issue 1 (Jeff Squyres (jsquyres))
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Mon, 5 May 2014 19:28:07 +0000
> >> From: "Daniels, Marcus G" <mdani...@lanl.gov>
> >> To: "'us...@open-mpi.org'" <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI_Barrier hangs on second attempt but only
> >> when multiple hosts used.
> >> Message-ID:
> >> <
> >> 532c594b7920a549a2a91cb4312cc57640dc5...@ecs-exg-p-mb01.win.lanl.gov>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >>
> >>
> >> From: Clay Kirkland [mailto:clay.kirkl...@versityinc.com]
> >> Sent: Friday, May 02, 2014 03:24 PM
> >> To: us...@open-mpi.org <us...@open-mpi.org>
> >> Subject: [OMPI users] MPI_Barrier hangs on second attempt but only when
> >> multiple hosts used.
> >>
> >> I have been using MPI for many many years so I have very well debugged
> >> mpi tests. I am
> >> having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions
> though
> >> with getting the
> >> MPI_Barrier calls to work. It works fine when I run all processes on
> >> one machine but when
> >> I run with two or more hosts the second call to MPI_Barrier always
> hangs.
> >> Not the first one,
> >> but always the second one. I looked at FAQ's and such but found
> nothing
> >> except for a comment
> >> that MPI_Barrier problems were often problems with fire walls. Also
> >> mentioned as a problem
> >> was not having the same version of mpi on both machines. I turned
> >> firewalls off and removed
> >> and reinstalled the same version on both hosts but I still see the same
> >> thing. I then installed
> >> lam mpi on two of my machines and that works fine. I can call the
> >> MPI_Barrier function when run on
> >> one of two machines by itself many times with no hangs. Only hangs if
> >> two or more hosts are involved.
> >> These runs are all being done on CentOS release 6.4. Here is test
> >> program I used.
> >>
> >> main (argc, argv)
> >> int argc;
> >> char **argv;
> >> {
> >> char message[20];
> >> char hoster[256];
> >> char nameis[256];
> >> int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> >> MPI_Comm comm;
> >> MPI_Status status;
> >>
> >> MPI_Init( &argc, &argv );
> >> MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> >> MPI_Comm_size( MPI_COMM_WORLD, &np);
> >>
> >> gethostname(hoster,256);
> >>
> >> printf(" In rank %d and host= %s Do Barrier call
> >> 1.\n",myrank,hoster);
> >> MPI_Barrier(MPI_COMM_WORLD);
> >> printf(" In rank %d and host= %s Do Barrier call
> >> 2.\n",myrank,hoster);
> >> MPI_Barrier(MPI_COMM_WORLD);
> >> printf(" In rank %d and host= %s Do Barrier call
> >> 3.\n",myrank,hoster);
> >> MPI_Barrier(MPI_COMM_WORLD);
> >> MPI_Finalize();
> >> exit(0);
> >> }
> >>
> >> Here are three runs of test program. First with two processes on one
> >> host, then with
> >> two processes on another host, and finally with one process on each of
> >> two hosts. The
> >> first two runs are fine but the last run hangs on the second
> MPI_Barrier.
> >>
> >> [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> >> In rank 0 and host= centos Do Barrier call 1.
> >> In rank 1 and host= centos Do Barrier call 1.
> >> In rank 1 and host= centos Do Barrier call 2.
> >> In rank 1 and host= centos Do Barrier call 3.
> >> In rank 0 and host= centos Do Barrier call 2.
> >> In rank 0 and host= centos Do Barrier call 3.
> >> [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> >> /root/.bashrc: line 14: unalias: ls: not found
> >> In rank 0 and host= RAID Do Barrier call 1.
> >> In rank 0 and host= RAID Do Barrier call 2.
> >> In rank 0 and host= RAID Do Barrier call 3.
> >> In rank 1 and host= RAID Do Barrier call 1.
> >> In rank 1 and host= RAID Do Barrier call 2.
> >> In rank 1 and host= RAID Do Barrier call 3.
> >> [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID a.out
> >> /root/.bashrc: line 14: unalias: ls: not found
> >> In rank 0 and host= centos Do Barrier call 1.
> >> In rank 0 and host= centos Do Barrier call 2.
> >> In rank 1 and host= RAID Do Barrier call 1.
> >> In rank 1 and host= RAID Do Barrier call 2.
> >>
> >> Since it is such a simple test and problem and such a widely used MPI
> >> function, it must obviously
> >> be an installation or configuration problem. A pstack for each of the
> >> hung MPI_Barrier processes
> >> on the two machines shows this:
> >>
> >> [root@centos ~]# pstack 31666
> >> #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from /lib64/libc.so.6
> >> #1 0x00007f5de06125eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> #2 0x00007f5de061475a in opal_event_base_loop () from
> >> /usr/local/lib/libmpi.so.1
> >> #3 0x00007f5de0639229 in opal_progress () from
> /usr/local/lib/libmpi.so.1
> >> #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> >> /usr/local/lib/libmpi.so.1
> >> #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs ()
> from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> #7 0x00007f5de05941c2 in PMPI_Barrier () from
> /usr/local/lib/libmpi.so.1
> >> #8 0x0000000000400a43 in main ()
> >>
> >> [root@RAID openmpi-1.6.5]# pstack 22167
> >> #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from /lib64/libc.so.6
> >> #1 0x00007f7ee46885eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> #2 0x00007f7ee468a75a in opal_event_base_loop () from
> >> /usr/local/lib/libmpi.so.1
> >> #3 0x00007f7ee46af229 in opal_progress () from
> /usr/local/lib/libmpi.so.1
> >> #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> >> /usr/local/lib/libmpi.so.1
> >> #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs ()
> from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> #7 0x00007f7ee460a1c2 in PMPI_Barrier () from
> /usr/local/lib/libmpi.so.1
> >> #8 0x0000000000400a43 in main ()
> >>
> >> Which looks exactly the same on each machine. Any thoughts or ideas
> >> would be greatly appreciated as
> >> I am stuck.
> >>
> >> Clay Kirkland
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> -------------- next part --------------
> >> HTML attachment scrubbed and removed
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Mon, 5 May 2014 22:20:59 -0400
> >> From: Richard Shaw <jr...@cita.utoronto.ca>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: [OMPI users] ROMIO bug reading darrays
> >> Message-ID:
> >> <
> >> can+evmkc+9kacnpausscziufwdj3jfcsymb-8zdx1etdkab...@mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Hello,
> >>
> >> I think I've come across a bug when using ROMIO to read in a 2D
> >> distributed
> >> array. I've attached a test case to this email.
> >>
> >> In the testcase I first initialise an array of 25 doubles (which will
> be a
> >> 5x5 grid), then I create a datatype representing a 5x5 matrix
> distributed
> >> in 3x3 blocks over a 2x2 process grid. As a reference I use MPI_Pack to
> >> pull out the block cyclic array elements local to each process (which I
> >> think is correct). Then I write the original array of 25 doubles to
> disk,
> >> and use MPI-IO to read it back in (performing the Open, Set_view, and
> >> Real_all), and compare to the reference.
> >>
> >> Running this with OMPI, the two match on all ranks.
> >>
> >> > mpirun -mca io ompio -np 4 ./darr_read.x
> >> === Rank 0 === (9 elements)
> >> Packed: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >> Read: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >>
> >> === Rank 1 === (6 elements)
> >> Packed: 15.0 16.0 17.0 20.0 21.0 22.0
> >> Read: 15.0 16.0 17.0 20.0 21.0 22.0
> >>
> >> === Rank 2 === (6 elements)
> >> Packed: 3.0 4.0 8.0 9.0 13.0 14.0
> >> Read: 3.0 4.0 8.0 9.0 13.0 14.0
> >>
> >> === Rank 3 === (4 elements)
> >> Packed: 18.0 19.0 23.0 24.0
> >> Read: 18.0 19.0 23.0 24.0
> >>
> >>
> >>
> >> However, using ROMIO the two differ on two of the ranks:
> >>
> >> > mpirun -mca io romio -np 4 ./darr_read.x
> >> === Rank 0 === (9 elements)
> >> Packed: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >> Read: 0.0 1.0 2.0 5.0 6.0 7.0 10.0 11.0 12.0
> >>
> >> === Rank 1 === (6 elements)
> >> Packed: 15.0 16.0 17.0 20.0 21.0 22.0
> >> Read: 0.0 1.0 2.0 0.0 1.0 2.0
> >>
> >> === Rank 2 === (6 elements)
> >> Packed: 3.0 4.0 8.0 9.0 13.0 14.0
> >> Read: 3.0 4.0 8.0 9.0 13.0 14.0
> >>
> >> === Rank 3 === (4 elements)
> >> Packed: 18.0 19.0 23.0 24.0
> >> Read: 0.0 1.0 0.0 1.0
> >>
> >>
> >>
> >> My interpretation is that the behaviour with OMPIO is correct.
> >> Interestingly everything matches up using both ROMIO and OMPIO if I set
> >> the
> >> block shape to 2x2.
> >>
> >> This was run on OS X using 1.8.2a1r31632. I have also run this on Linux
> >> with OpenMPI 1.7.4, and OMPIO is still correct, but using ROMIO I just
> get
> >> segfaults.
> >>
> >> Thanks,
> >> Richard
> >> -------------- next part --------------
> >> HTML attachment scrubbed and removed
> >> -------------- next part --------------
> >> A non-text attachment was scrubbed...
> >> Name: darr_read.c
> >> Type: text/x-csrc
> >> Size: 2218 bytes
> >> Desc: not available
> >> URL: <
> >>
> http://www.open-mpi.org/MailArchives/users/attachments/20140505/5a5ab0ba/attachment.bin
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Tue, 06 May 2014 13:24:35 +0200
> >> From: Imran Ali <imra...@student.matnat.uio.no>
> >> To: <us...@open-mpi.org>
> >> Subject: [OMPI users] MPI File Open does not work
> >> Message-ID: <d57bdf499c00360b737205b085c50...@ulrik.uio.no>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >>
> >>
> >> I get the following error when I try to run the following python
> >> code
> >> import mpi4py.MPI as MPI
> >> comm = MPI.COMM_WORLD
> >>
> >> MPI.File.Open(comm,"some.file")
> >>
> >> $ mpirun -np 1 python
> >> test_mpi.py
> >> Traceback (most recent call last):
> >> File "test_mpi.py", line
> >> 3, in <module>
> >> MPI.File.Open(comm," h5ex_d_alloc.h5")
> >> File "File.pyx",
> >> line 67, in mpi4py.MPI.File.Open
> >> (src/mpi4py.MPI.c:89639)
> >> mpi4py.MPI.Exception: MPI_ERR_OTHER: known
> >> error not in
> >> list
> >>
> --------------------------------------------------------------------------
> >> mpirun
> >> noticed that the job aborted, but has no info as to the process
> >> that
> >> caused that
> >> situation.
> >>
> --------------------------------------------------------------------------
> >>
> >>
> >> My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> >> dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise
> 6
> >> (OS I am using, release 6.5) . It configured the build as following :
> >>
> >>
> >> ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> >> --with-threads=posix --disable-mpi-profile
> >>
> >> I need emphasize that I do
> >> not have root acces on the system I am running my application.
> >>
> >> Imran
> >>
> >>
> >>
> >> -------------- next part --------------
> >> HTML attachment scrubbed and removed
> >>
> >> ------------------------------
> >>
> >> Message: 4
> >> Date: Tue, 6 May 2014 12:56:04 +0000
> >> From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI File Open does not work
> >> Message-ID: <e7df28cb-d4fb-4087-928e-18e61d1d2...@cisco.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> The thread support in the 1.6 series is not very good. You might try:
> >>
> >> - Upgrading to 1.6.5
> >> - Or better yet, upgrading to 1.8.1
> >>
> >>
> >> On May 6, 2014, at 7:24 AM, Imran Ali <imra...@student.matnat.uio.no>
> >> wrote:
> >>
> >> > I get the following error when I try to run the following python code
> >> >
> >> > import mpi4py.MPI as MPI
> >> > comm = MPI.COMM_WORLD
> >> > MPI.File.Open(comm,"some.file")
> >> >
> >> > $ mpirun -np 1 python test_mpi.py
> >> > Traceback (most recent call last):
> >> > File "test_mpi.py", line 3, in <module>
> >> > MPI.File.Open(comm," h5ex_d_alloc.h5")
> >> > File "File.pyx", line 67, in mpi4py.MPI.File.Open
> >> (src/mpi4py.MPI.c:89639)
> >> > mpi4py.MPI.Exception: MPI_ERR_OTHER: known error not in list
> >> >
> >>
> --------------------------------------------------------------------------
> >> > mpirun noticed that the job aborted, but has no info as to the process
> >> > that caused that situation.
> >> >
> >>
> --------------------------------------------------------------------------
> >> >
> >> > My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> >> dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise
> 6
> >> (OS I am using, release 6.5) . It configured the build as following :
> >> >
> >> > ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> >> --with-threads=posix --disable-mpi-profile
> >> >
> >> > I need emphasize that I do not have root acces on the system I am
> >> running my application.
> >> >
> >> > Imran
> >> >
> >> >
> >> > _______________________________________________
> >> > users mailing list
> >> > us...@open-mpi.org
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >>
> >> --
> >> Jeff Squyres
> >> jsquy...@cisco.com
> >> For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 5
> >> Date: Tue, 6 May 2014 15:32:21 +0200
> >> From: Imran Ali <imra...@student.matnat.uio.no>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI File Open does not work
> >> Message-ID: <fa6dffff-6c66-4a47-84fc-148fb51ce...@math.uio.no>
> >> Content-Type: text/plain; charset=us-ascii
> >>
> >>
> >> 6. mai 2014 kl. 14:56 skrev Jeff Squyres (jsquyres) <jsquy...@cisco.com
> >:
> >>
> >> > The thread support in the 1.6 series is not very good. You might try:
> >> >
> >> > - Upgrading to 1.6.5
> >> > - Or better yet, upgrading to 1.8.1
> >> >
> >>
> >> I will attempt that than. I read at
> >>
> >> http://www.open-mpi.org/faq/?category=building#install-overwrite
> >>
> >> that I should completely uninstall my previous version. Could you
> >> recommend to me how I can go about doing it (without root access).
> >> I am uncertain where I can use make uninstall.
> >>
> >> Imran
> >>
> >> >
> >> > On May 6, 2014, at 7:24 AM, Imran Ali <imra...@student.matnat.uio.no>
> >> wrote:
> >> >
> >> >> I get the following error when I try to run the following python code
> >> >>
> >> >> import mpi4py.MPI as MPI
> >> >> comm = MPI.COMM_WORLD
> >> >> MPI.File.Open(comm,"some.file")
> >> >>
> >> >> $ mpirun -np 1 python test_mpi.py
> >> >> Traceback (most recent call last):
> >> >> File "test_mpi.py", line 3, in <module>
> >> >> MPI.File.Open(comm," h5ex_d_alloc.h5")
> >> >> File "File.pyx", line 67, in mpi4py.MPI.File.Open
> >> (src/mpi4py.MPI.c:89639)
> >> >> mpi4py.MPI.Exception: MPI_ERR_OTHER: known error not in list
> >> >>
> >>
> --------------------------------------------------------------------------
> >> >> mpirun noticed that the job aborted, but has no info as to the
> process
> >> >> that caused that situation.
> >> >>
> >>
> --------------------------------------------------------------------------
> >> >>
> >> >> My mpirun version is (Open MPI) 1.6.2. I installed openmpi using the
> >> dorsal script (https://github.com/FEniCS/dorsal) for Redhat Enterprise
> 6
> >> (OS I am using, release 6.5) . It configured the build as following :
> >> >>
> >> >> ./configure --enable-mpi-thread-multiple --enable-opal-multi-threads
> >> --with-threads=posix --disable-mpi-profile
> >> >>
> >> >> I need emphasize that I do not have root acces on the system I am
> >> running my application.
> >> >>
> >> >> Imran
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> users mailing list
> >> >> us...@open-mpi.org
> >> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >> >
> >> >
> >> > --
> >> > Jeff Squyres
> >> > jsquy...@cisco.com
> >> > For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >> >
> >> > _______________________________________________
> >> > users mailing list
> >> > us...@open-mpi.org
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 6
> >> Date: Tue, 6 May 2014 13:34:38 +0000
> >> From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI File Open does not work
> >> Message-ID: <2a933c0e-80f6-4ded-b44c-53b5f37ef...@cisco.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> On May 6, 2014, at 9:32 AM, Imran Ali <imra...@student.matnat.uio.no>
> >> wrote:
> >>
> >> > I will attempt that than. I read at
> >> >
> >> > http://www.open-mpi.org/faq/?category=building#install-overwrite
> >> >
> >> > that I should completely uninstall my previous version.
> >>
> >> Yes, that is best. OR: you can install into a whole separate tree and
> >> ignore the first installation.
> >>
> >> > Could you recommend to me how I can go about doing it (without root
> >> access).
> >> > I am uncertain where I can use make uninstall.
> >>
> >> If you don't have write access into the installation tree (i.e., it was
> >> installed via root and you don't have root access), then your best bet
> is
> >> simply to install into a new tree. E.g., if OMPI is installed into
> >> /opt/openmpi-1.6.2, try installing into /opt/openmpi-1.6.5, or even
> >> $HOME/installs/openmpi-1.6.5, or something like that.
> >>
> >> --
> >> Jeff Squyres
> >> jsquy...@cisco.com
> >> For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 7
> >> Date: Tue, 6 May 2014 15:40:34 +0200
> >> From: Imran Ali <imra...@student.matnat.uio.no>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI File Open does not work
> >> Message-ID: <14f0596c-c5c5-4b1a-a4a8-8849d44ab...@math.uio.no>
> >> Content-Type: text/plain; charset=us-ascii
> >>
> >>
> >> 6. mai 2014 kl. 15:34 skrev Jeff Squyres (jsquyres) <jsquy...@cisco.com
> >:
> >>
> >> > On May 6, 2014, at 9:32 AM, Imran Ali <imra...@student.matnat.uio.no>
> >> wrote:
> >> >
> >> >> I will attempt that than. I read at
> >> >>
> >> >> http://www.open-mpi.org/faq/?category=building#install-overwrite
> >> >>
> >> >> that I should completely uninstall my previous version.
> >> >
> >> > Yes, that is best. OR: you can install into a whole separate tree and
> >> ignore the first installation.
> >> >
> >> >> Could you recommend to me how I can go about doing it (without root
> >> access).
> >> >> I am uncertain where I can use make uninstall.
> >> >
> >> > If you don't have write access into the installation tree (i.e., it
> was
> >> installed via root and you don't have root access), then your best bet
> is
> >> simply to install into a new tree. E.g., if OMPI is installed into
> >> /opt/openmpi-1.6.2, try installing into /opt/openmpi-1.6.5, or even
> >> $HOME/installs/openmpi-1.6.5, or something like that.
> >>
> >> My install was in my user directory (i.e $HOME). I managed to locate the
> >> source directory and successfully run make uninstall.
> >>
> >> Will let you know how things went after installation.
> >>
> >> Imran
> >>
> >> >
> >> > --
> >> > Jeff Squyres
> >> > jsquy...@cisco.com
> >> > For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >> >
> >> > _______________________________________________
> >> > users mailing list
> >> > us...@open-mpi.org
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 8
> >> Date: Tue, 6 May 2014 14:42:52 +0000
> >> From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] MPI File Open does not work
> >> Message-ID: <710e3328-edaa-4a13-9f07-b45fe3191...@cisco.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> On May 6, 2014, at 9:40 AM, Imran Ali <imra...@student.matnat.uio.no>
> >> wrote:
> >>
> >> > My install was in my user directory (i.e $HOME). I managed to locate
> >> the source directory and successfully run make uninstall.
> >>
> >>
> >> FWIW, I usually install Open MPI into its own subdir. E.g.,
> >> $HOME/installs/openmpi-x.y.z. Then if I don't want that install any
> more,
> >> I can just "rm -rf $HOME/installs/openmpi-x.y.z" -- no need to "make
> >> uninstall". Specifically: if there's nothing else installed in the same
> >> tree as Open MPI, you can just rm -rf its installation tree.
> >>
> >> --
> >> Jeff Squyres
> >> jsquy...@cisco.com
> >> For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 9
> >> Date: Tue, 6 May 2014 14:50:34 +0000
> >> From: "Jeff Squyres (jsquyres)" <jsquy...@cisco.com>
> >> To: Open MPI Users <us...@open-mpi.org>
> >> Subject: Re: [OMPI users] users Digest, Vol 2879, Issue 1
> >> Message-ID: <c60aa7e1-96a7-4ccd-9b5b-11a38fb87...@cisco.com>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> Are you using TCP as the MPI transport?
> >>
> >> If so, another thing to try is to limit the IP interfaces that MPI uses
> >> for its traffic to see if there's some kind of problem with specific
> >> networks.
> >>
> >> For example:
> >>
> >> mpirun --mca btl_tcp_if_include eth0 ...
> >>
> >> If that works, then try adding in any/all other IP interfaces that you
> >> have on your machines.
> >>
> >> A sorta-wild guess: you have some IP interfaces that aren't working, or
> >> at least, don't work in the way that OMPI wants them to work. So the
> first
> >> barrier works because it flows across eth0 (or some other first network
> >> that, as far as OMPI is concerned, works just fine). But then the next
> >> barrier round-robin advances to the next IP interface, and it doesn't
> work
> >> for some reason.
> >>
> >> We've seen virtual machine bridge interfaces cause problems, for
> example.
> >> E.g., if a machine has a Xen virtual machine interface (vibr0, IIRC?),
> >> then OMPI will try to use it to communicate with peer MPI processes
> because
> >> it has a "compatible" IP address, and OMPI think it should be
> >> connected/reachable to peers. If this is the case, you might want to
> >> disable such interfaces and/or use btl_tcp_if_include or
> btl_tcp_if_exclude
> >> to select the interfaces that you want to use.
> >>
> >> Pro tip: if you use btl_tcp_if_exclude, remember to exclude the loopback
> >> interface, too. OMPI defaults to a btl_tcp_if_include="" (blank) and
> >> btl_tcp_if_exclude="lo0". So if you override btl_tcp_if_exclude, you
> need
> >> to be sure to *also* include lo0 in the new value. For example:
> >>
> >> mpirun --mca btl_tcp_if_exclude lo0,virb0 ...
> >>
> >> Also, if possible, try upgrading to Open MPI 1.8.1.
> >>
> >>
> >>
> >> On May 4, 2014, at 2:15 PM, Clay Kirkland <clay.kirkl...@versityinc.com
> >
> >> wrote:
> >>
> >> > I am configuring with all defaults. Just doing a ./configure and
> then
> >> > make and make install. I have used open mpi on several kinds of
> >> > unix systems this way and have had no trouble before. I believe I
> >> > last had success on a redhat version of linux.
> >> >
> >> >
> >> > On Sat, May 3, 2014 at 11:00 AM, <users-requ...@open-mpi.org> wrote:
> >> > Send users mailing list submissions to
> >> > us...@open-mpi.org
> >> >
> >> > To subscribe or unsubscribe via the World Wide Web, visit
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >> > or, via email, send a message with subject or body 'help' to
> >> > users-requ...@open-mpi.org
> >> >
> >> > You can reach the person managing the list at
> >> > users-ow...@open-mpi.org
> >> >
> >> > When replying, please edit your Subject line so it is more specific
> >> > than "Re: Contents of users digest..."
> >> >
> >> >
> >> > Today's Topics:
> >> >
> >> > 1. MPI_Barrier hangs on second attempt but only when multiple
> >> > hosts used. (Clay Kirkland)
> >> > 2. Re: MPI_Barrier hangs on second attempt but only when
> >> > multiple hosts used. (Ralph Castain)
> >> >
> >> >
> >> > ----------------------------------------------------------------------
> >> >
> >> > Message: 1
> >> > Date: Fri, 2 May 2014 16:24:04 -0500
> >> > From: Clay Kirkland <clay.kirkl...@versityinc.com>
> >> > To: us...@open-mpi.org
> >> > Subject: [OMPI users] MPI_Barrier hangs on second attempt but only
> >> > when multiple hosts used.
> >> > Message-ID:
> >> > <CAJDnjA8Wi=FEjz6Vz+Bc34b+nFE=
> >> tf4b7g0bqgmbekg7h-p...@mail.gmail.com>
> >> > Content-Type: text/plain; charset="utf-8"
> >> >
> >> > I have been using MPI for many many years so I have very well debugged
> >> mpi
> >> > tests. I am
> >> > having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions
> >> though
> >> > with getting the
> >> > MPI_Barrier calls to work. It works fine when I run all processes on
> >> one
> >> > machine but when
> >> > I run with two or more hosts the second call to MPI_Barrier always
> >> hangs.
> >> > Not the first one,
> >> > but always the second one. I looked at FAQ's and such but found
> >> nothing
> >> > except for a comment
> >> > that MPI_Barrier problems were often problems with fire walls. Also
> >> > mentioned as a problem
> >> > was not having the same version of mpi on both machines. I turned
> >> > firewalls off and removed
> >> > and reinstalled the same version on both hosts but I still see the
> same
> >> > thing. I then installed
> >> > lam mpi on two of my machines and that works fine. I can call the
> >> > MPI_Barrier function when run on
> >> > one of two machines by itself many times with no hangs. Only hangs
> if
> >> two
> >> > or more hosts are involved.
> >> > These runs are all being done on CentOS release 6.4. Here is test
> >> program
> >> > I used.
> >> >
> >> > main (argc, argv)
> >> > int argc;
> >> > char **argv;
> >> > {
> >> > char message[20];
> >> > char hoster[256];
> >> > char nameis[256];
> >> > int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> >> > MPI_Comm comm;
> >> > MPI_Status status;
> >> >
> >> > MPI_Init( &argc, &argv );
> >> > MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> >> > MPI_Comm_size( MPI_COMM_WORLD, &np);
> >> >
> >> > gethostname(hoster,256);
> >> >
> >> > printf(" In rank %d and host= %s Do Barrier call
> >> > 1.\n",myrank,hoster);
> >> > MPI_Barrier(MPI_COMM_WORLD);
> >> > printf(" In rank %d and host= %s Do Barrier call
> >> > 2.\n",myrank,hoster);
> >> > MPI_Barrier(MPI_COMM_WORLD);
> >> > printf(" In rank %d and host= %s Do Barrier call
> >> > 3.\n",myrank,hoster);
> >> > MPI_Barrier(MPI_COMM_WORLD);
> >> > MPI_Finalize();
> >> > exit(0);
> >> > }
> >> >
> >> > Here are three runs of test program. First with two processes on
> one
> >> > host, then with
> >> > two processes on another host, and finally with one process on each of
> >> two
> >> > hosts. The
> >> > first two runs are fine but the last run hangs on the second
> >> MPI_Barrier.
> >> >
> >> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> >> > In rank 0 and host= centos Do Barrier call 1.
> >> > In rank 1 and host= centos Do Barrier call 1.
> >> > In rank 1 and host= centos Do Barrier call 2.
> >> > In rank 1 and host= centos Do Barrier call 3.
> >> > In rank 0 and host= centos Do Barrier call 2.
> >> > In rank 0 and host= centos Do Barrier call 3.
> >> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> >> > /root/.bashrc: line 14: unalias: ls: not found
> >> > In rank 0 and host= RAID Do Barrier call 1.
> >> > In rank 0 and host= RAID Do Barrier call 2.
> >> > In rank 0 and host= RAID Do Barrier call 3.
> >> > In rank 1 and host= RAID Do Barrier call 1.
> >> > In rank 1 and host= RAID Do Barrier call 2.
> >> > In rank 1 and host= RAID Do Barrier call 3.
> >> > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID
> a.out
> >> > /root/.bashrc: line 14: unalias: ls: not found
> >> > In rank 0 and host= centos Do Barrier call 1.
> >> > In rank 0 and host= centos Do Barrier call 2.
> >> > In rank 1 and host= RAID Do Barrier call 1.
> >> > In rank 1 and host= RAID Do Barrier call 2.
> >> >
> >> > Since it is such a simple test and problem and such a widely used
> MPI
> >> > function, it must obviously
> >> > be an installation or configuration problem. A pstack for each of
> the
> >> > hung MPI_Barrier processes
> >> > on the two machines shows this:
> >> >
> >> > [root@centos ~]# pstack 31666
> >> > #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from
> /lib64/libc.so.6
> >> > #1 0x00007f5de06125eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> > #2 0x00007f5de061475a in opal_event_base_loop () from
> >> > /usr/local/lib/libmpi.so.1
> >> > #3 0x00007f5de0639229 in opal_progress () from
> >> /usr/local/lib/libmpi.so.1
> >> > #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> >> > /usr/local/lib/libmpi.so.1
> >> > #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> >> > /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs ()
> >> from
> >> > /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > #7 0x00007f5de05941c2 in PMPI_Barrier () from
> >> /usr/local/lib/libmpi.so.1
> >> > #8 0x0000000000400a43 in main ()
> >> >
> >> > [root@RAID openmpi-1.6.5]# pstack 22167
> >> > #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from
> /lib64/libc.so.6
> >> > #1 0x00007f7ee46885eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> > #2 0x00007f7ee468a75a in opal_event_base_loop () from
> >> > /usr/local/lib/libmpi.so.1
> >> > #3 0x00007f7ee46af229 in opal_progress () from
> >> /usr/local/lib/libmpi.so.1
> >> > #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> >> > /usr/local/lib/libmpi.so.1
> >> > #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> >> > /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs ()
> >> from
> >> > /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > #7 0x00007f7ee460a1c2 in PMPI_Barrier () from
> >> /usr/local/lib/libmpi.so.1
> >> > #8 0x0000000000400a43 in main ()
> >> >
> >> > Which looks exactly the same on each machine. Any thoughts or ideas
> >> would
> >> > be greatly appreciated as
> >> > I am stuck.
> >> >
> >> > Clay Kirkland
> >> > -------------- next part --------------
> >> > HTML attachment scrubbed and removed
> >> >
> >> > ------------------------------
> >> >
> >> > Message: 2
> >> > Date: Sat, 3 May 2014 06:39:20 -0700
> >> > From: Ralph Castain <r...@open-mpi.org>
> >> > To: Open MPI Users <us...@open-mpi.org>
> >> > Subject: Re: [OMPI users] MPI_Barrier hangs on second attempt but only
> >> > when multiple hosts used.
> >> > Message-ID: <3cf53d73-15d9-40bb-a2de-50ba3561a...@open-mpi.org>
> >> > Content-Type: text/plain; charset="us-ascii"
> >> >
> >> > Hmmm...just testing on my little cluster here on two nodes, it works
> >> just fine with 1.8.2:
> >> >
> >> > [rhc@bend001 v1.8]$ mpirun -n 2 --map-by node ./a.out
> >> > In rank 0 and host= bend001 Do Barrier call 1.
> >> > In rank 0 and host= bend001 Do Barrier call 2.
> >> > In rank 0 and host= bend001 Do Barrier call 3.
> >> > In rank 1 and host= bend002 Do Barrier call 1.
> >> > In rank 1 and host= bend002 Do Barrier call 2.
> >> > In rank 1 and host= bend002 Do Barrier call 3.
> >> > [rhc@bend001 v1.8]$
> >> >
> >> >
> >> > How are you configuring OMPI?
> >> >
> >> >
> >> > On May 2, 2014, at 2:24 PM, Clay Kirkland <
> clay.kirkl...@versityinc.com>
> >> wrote:
> >> >
> >> > > I have been using MPI for many many years so I have very well
> >> debugged mpi tests. I am
> >> > > having trouble on either openmpi-1.4.5 or openmpi-1.6.5 versions
> >> though with getting the
> >> > > MPI_Barrier calls to work. It works fine when I run all processes
> >> on one machine but when
> >> > > I run with two or more hosts the second call to MPI_Barrier always
> >> hangs. Not the first one,
> >> > > but always the second one. I looked at FAQ's and such but found
> >> nothing except for a comment
> >> > > that MPI_Barrier problems were often problems with fire walls. Also
> >> mentioned as a problem
> >> > > was not having the same version of mpi on both machines. I turned
> >> firewalls off and removed
> >> > > and reinstalled the same version on both hosts but I still see the
> >> same thing. I then installed
> >> > > lam mpi on two of my machines and that works fine. I can call the
> >> MPI_Barrier function when run on
> >> > > one of two machines by itself many times with no hangs. Only hangs
> >> if two or more hosts are involved.
> >> > > These runs are all being done on CentOS release 6.4. Here is test
> >> program I used.
> >> > >
> >> > > main (argc, argv)
> >> > > int argc;
> >> > > char **argv;
> >> > > {
> >> > > char message[20];
> >> > > char hoster[256];
> >> > > char nameis[256];
> >> > > int fd, i, j, jnp, iret, myrank, np, ranker, recker;
> >> > > MPI_Comm comm;
> >> > > MPI_Status status;
> >> > >
> >> > > MPI_Init( &argc, &argv );
> >> > > MPI_Comm_rank( MPI_COMM_WORLD, &myrank);
> >> > > MPI_Comm_size( MPI_COMM_WORLD, &np);
> >> > >
> >> > > gethostname(hoster,256);
> >> > >
> >> > > printf(" In rank %d and host= %s Do Barrier call
> >> 1.\n",myrank,hoster);
> >> > > MPI_Barrier(MPI_COMM_WORLD);
> >> > > printf(" In rank %d and host= %s Do Barrier call
> >> 2.\n",myrank,hoster);
> >> > > MPI_Barrier(MPI_COMM_WORLD);
> >> > > printf(" In rank %d and host= %s Do Barrier call
> >> 3.\n",myrank,hoster);
> >> > > MPI_Barrier(MPI_COMM_WORLD);
> >> > > MPI_Finalize();
> >> > > exit(0);
> >> > > }
> >> > >
> >> > > Here are three runs of test program. First with two processes on
> >> one host, then with
> >> > > two processes on another host, and finally with one process on each
> >> of two hosts. The
> >> > > first two runs are fine but the last run hangs on the second
> >> MPI_Barrier.
> >> > >
> >> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos a.out
> >> > > In rank 0 and host= centos Do Barrier call 1.
> >> > > In rank 1 and host= centos Do Barrier call 1.
> >> > > In rank 1 and host= centos Do Barrier call 2.
> >> > > In rank 1 and host= centos Do Barrier call 3.
> >> > > In rank 0 and host= centos Do Barrier call 2.
> >> > > In rank 0 and host= centos Do Barrier call 3.
> >> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host RAID a.out
> >> > > /root/.bashrc: line 14: unalias: ls: not found
> >> > > In rank 0 and host= RAID Do Barrier call 1.
> >> > > In rank 0 and host= RAID Do Barrier call 2.
> >> > > In rank 0 and host= RAID Do Barrier call 3.
> >> > > In rank 1 and host= RAID Do Barrier call 1.
> >> > > In rank 1 and host= RAID Do Barrier call 2.
> >> > > In rank 1 and host= RAID Do Barrier call 3.
> >> > > [root@centos MPI]# /usr/local/bin/mpirun -np 2 --host centos,RAID
> >> a.out
> >> > > /root/.bashrc: line 14: unalias: ls: not found
> >> > > In rank 0 and host= centos Do Barrier call 1.
> >> > > In rank 0 and host= centos Do Barrier call 2.
> >> > > In rank 1 and host= RAID Do Barrier call 1.
> >> > > In rank 1 and host= RAID Do Barrier call 2.
> >> > >
> >> > > Since it is such a simple test and problem and such a widely used
> >> MPI function, it must obviously
> >> > > be an installation or configuration problem. A pstack for each of
> >> the hung MPI_Barrier processes
> >> > > on the two machines shows this:
> >> > >
> >> > > [root@centos ~]# pstack 31666
> >> > > #0 0x0000003baf0e8ee3 in __epoll_wait_nocancel () from
> >> /lib64/libc.so.6
> >> > > #1 0x00007f5de06125eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #2 0x00007f5de061475a in opal_event_base_loop () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #3 0x00007f5de0639229 in opal_progress () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #4 0x00007f5de0586f75 in ompi_request_default_wait_all () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #5 0x00007f5ddc59565e in ompi_coll_tuned_sendrecv_actual () from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > > #6 0x00007f5ddc59d8ff in ompi_coll_tuned_barrier_intra_two_procs ()
> >> from /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > > #7 0x00007f5de05941c2 in PMPI_Barrier () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #8 0x0000000000400a43 in main ()
> >> > >
> >> > > [root@RAID openmpi-1.6.5]# pstack 22167
> >> > > #0 0x00000030302e8ee3 in __epoll_wait_nocancel () from
> >> /lib64/libc.so.6
> >> > > #1 0x00007f7ee46885eb in epoll_dispatch () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #2 0x00007f7ee468a75a in opal_event_base_loop () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #3 0x00007f7ee46af229 in opal_progress () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #4 0x00007f7ee45fcf75 in ompi_request_default_wait_all () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #5 0x00007f7ee060b65e in ompi_coll_tuned_sendrecv_actual () from
> >> /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > > #6 0x00007f7ee06138ff in ompi_coll_tuned_barrier_intra_two_procs ()
> >> from /usr/local/lib/openmpi/mca_coll_tuned.so
> >> > > #7 0x00007f7ee460a1c2 in PMPI_Barrier () from
> >> /usr/local/lib/libmpi.so.1
> >> > > #8 0x0000000000400a43 in main ()
> >> > >
> >> > > Which looks exactly the same on each machine. Any thoughts or
> ideas
> >> would be greatly appreciated as
> >> > > I am stuck.
> >> > >
> >> > > Clay Kirkland
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > _______________________________________________
> >> > > users mailing list
> >> > > us...@open-mpi.org
> >> > > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >> >
> >> > -------------- next part --------------
> >> > HTML attachment scrubbed and removed
> >> >
> >> > ------------------------------
> >> >
> >> > Subject: Digest Footer
> >> >
> >> > _______________________________________________
> >> > users mailing list
> >> > us...@open-mpi.org
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >> >
> >> > ------------------------------
> >> >
> >> > End of users Digest, Vol 2879, Issue 1
> >> > **************************************
> >> >
> >> > _______________________________________________
> >> > users mailing list
> >> > us...@open-mpi.org
> >> > http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >>
> >> --
> >> Jeff Squyres
> >> jsquy...@cisco.com
> >> For corporate legal information go to:
> >> http://www.cisco.com/web/about/doing_business/legal/cri/
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> users mailing list
> >> us...@open-mpi.org
> >> http://www.open-mpi.org/mailman/listinfo.cgi/users
> >>
> >> ------------------------------
> >>
> >> End of users Digest, Vol 2881, Issue 1
> >> **************************************
> >>
> >
> >
> -------------- next part --------------
> HTML attachment scrubbed and removed
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
> ------------------------------
>
> End of users Digest, Vol 2881, Issue 2
> **************************************
>
